New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy G110 Brushless Outrunner 295kv (1,10 Glow)

Turnigy G110 Brushless Outrunner 295kv (1,10 Glow)

Shipped From:
  • USA
QTY:

Now save enregistrer 0,00 € 0,00 €

67,82 €
Statut:
En stock.
Poids
679 g
SKU:
G110-295
WANT FREE SHIPPING? Click here to find out more!
Conçu pour être un swap directe pour votre moteur de lueur 1.10 de taille. Le brushless Turnigy outrunner EasyMatch G110 fournira plus de puissance et avec son rendement élevé, de longues durées d'exécution.
Un moteur de qualité, conçu spécifiquement pour les avions conçus pour voler avec un moteur de lueur 1.10 de taille.

Spec.
Batterie: 8 ~ 9S cellulaire /29.6~33.3V
RPM: 295kv
Courant max: 55A
Aucun courant de charge: 10V / 1.2A
Capacité actuelle: 65A / 15sec
Résistance interne: 0,03 ohm
Poids: 485g (non compris les connecteurs)
Diamètre de l' arbre: 8mm
Dimensions: 79x63mm

Obligatoire;
85A HV ESC
8S ~ 9S Li-Po / 24 ~ 32 cellules Ni-MH / Ni-Cd
17x8 ~ 19x10 prop

Convient pour
le sport et l' échelle des avions pesant 9 à 15 livres (4-6.8 kg).
  • UGS G110-295
  • Brand Turnigy
  • Poids (g) 679.00
  • Longueur 125.00
  • Largeur 83.00
  • la taille 103.00
  • Kv ( rpm / v) 295.00
  • Max Current (A) 55.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 33.00
  • (W ) 1797.00
  • Arbre A ( mm ) 8.00
  • Longueur B ( mm ) 56.00
  • Diamètre C ( mm ) 63.00
  • Longueur Can D ( mm ) 26.00
  • Longueur totale E ( mm ) 79.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hi, a small update...
All measurments (static thrust, power, RPM) available with 4 props (2 17x10 and 2 18x10) are available here :
http://aero-montbeliard.forumactif.org/t149p330-teasing-construction-piper-pa18#2772
Hope it will help !

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

Hi, a small update...
All measurments (static thrust, power, RPM) available with 4 props (2 17x10 and 2 18x10) are available here :
http://aero-montbeliard.forumactif.org/t149p330-teasing-construction-piper-pa18#2772
Hope it will help !

Hi,
This is a great motor ! Put it on a Carbon cub, 2,4m wingspan and OA weight around 6Kg.
Powerhouse setup : - Batteries : Zippy compact 4500mAh, 2x4S - ESC : Turnigy Sentilon HV 100A - Motor : G110
Measurments :
Turnigy 17x10 light electric prop : 29,8V, 54,5A, 1680W, 7800rpm
TGY 17x10 plastic prop : 30,2V, 51A, 1550W, 8000rpm
Aerostar 18x10 : 29V, 75A, 2200W, 7200rpm
I'll try another 18x10 Turnigy light electric soon.
Haven't measured the static traction yet !
Only 'desagrement' : I had to secure the wires on the motor backplate, as wires are stiff, not very well protected, and holes in the backplate are sharp... Not that sure it would have last long with no mods on this topic...
I'll try to update after the first flight !
Other specs on the cub and the motor mount available here (in french...) : http://aero-montbeliard.forumactif.org/t149p310-teasing-construction-piper-pa18#2603

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

Hi,
This is a great motor ! Put it on a Carbon cub, 2,4m wingspan and OA weight around 6Kg.
Powerhouse setup : - Batteries : Zippy compact 4500mAh, 2x4S - ESC : Turnigy Sentilon HV 100A - Motor : G110
Measurments :
Turnigy 17x10 light electric prop : 29,8V, 54,5A, 1680W, 7800rpm
TGY 17x10 plastic prop : 30,2V, 51A, 1550W, 8000rpm
Aerostar 18x10 : 29V, 75A, 2200W, 7200rpm
I'll try another 18x10 Turnigy light electric soon.
Haven't measured the static traction yet !
Only 'desagrement' : I had to secure the wires on the motor backplate, as wires are stiff, not very well protected, and holes in the backplate are sharp... Not that sure it would have last long with no mods on this topic...
I'll try to update after the first flight !
Other specs on the cub and the motor mount available here (in french...) : http://aero-montbeliard.forumactif.org/t149p310-teasing-construction-piper-pa18#2603

le moteur démarre puis ralenti et s' arréte quand je remet la commande à zéro et redemarre et à nouveau s'arréte
pouvez vous m' aider
merci

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

le moteur démarre puis ralenti et s' arréte quand je remet la commande à zéro et redemarre et à nouveau s'arréte
pouvez vous m' aider
merci

Powerfull for my 2m Sukhoi 29. Just perfect & good quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Powerfull for my 2m Sukhoi 29. Just perfect & good quality.

I use this engine om a 185 cm 5300g extra 260. I run it on 8s 2x4 s 4500mAh with a 18 x10 light weight wooden turnigy prop it draws 70A on the ground. After a 6 minute flight with some throttle management the battery has 40pcnt left and everything is cool.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this engine om a 185 cm 5300g extra 260. I run it on 8s 2x4 s 4500mAh with a 18 x10 light weight wooden turnigy prop it draws 70A on the ground. After a 6 minute flight with some throttle management the battery has 40pcnt left and everything is cool.

Great motor. Quality gets an Aplus.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor. Quality gets an Aplus.

Tested this G110 295kva motor on my test stand

Prop: 3 Bladed 15x8 electric
Lipo: 9s (6s 3s Turnigy 5800maH)
ESC: Spin 99

Result:
1754Watts, 53max Amp draw, 5kg thrust, 8500 RPM.

Motor pulls strong and is well made.
2x G110s will go into my Heinkel HE111 100` 15kg AUW.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tested this G110 295kva motor on my test stand

Prop: 3 Bladed 15x8 electric
Lipo: 9s (6s 3s Turnigy 5800maH)
ESC: Spin 99

Result:
1754Watts, 53max Amp draw, 5kg thrust, 8500 RPM.

Motor pulls strong and is well made.
2x G110s will go into my Heinkel HE111 100` 15kg AUW.

I purchase one of these about 3 months ago. I placed it into a FMS Corsair 1700mm with a 4 blade propeller that came with the kit. I added a Castle lite phoenix ESC. What a combination compared to the motor that is stock from FMS. I have flown with both motors and there is no comparison. The Turing has at least 50pcnt more power. The plane flew so much better, not sluggish at all. It is less expensive than the FMS engine also making it the best deal I have found. At 50pcnt throttle, it had the power of full power from the FMS. I can't say enough good about this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchase one of these about 3 months ago. I placed it into a FMS Corsair 1700mm with a 4 blade propeller that came with the kit. I added a Castle lite phoenix ESC. What a combination compared to the motor that is stock from FMS. I have flown with both motors and there is no comparison. The Turing has at least 50pcnt more power. The plane flew so much better, not sluggish at all. It is less expensive than the FMS engine also making it the best deal I have found. At 50pcnt throttle, it had the power of full power from the FMS. I can't say enough good about this product.

Habe den Motor schon in verschiedenen Modellen geflogen, zuletzt in einer Piper J3 Cub von Black Horse mit 2450 mm Spannweite. Mit 8S (2 x 4S 4000 mAh) und einer 18*10 Luftschraube reicht Halbgas um Scale zu fliegen.

Wunderbarer krftiger Motor, der sich bestens mit einem Schulze fut-val Regler vesteht.
Habe ca. 10 Turnigy Motoren im Einsatz, die keine Magnete verlieren und alle klaglos laufen, solange man im Dauerbetrieb nicht die max. Leistung fordert. HK ist hier mit seinen Angaben allerdings etwas grozgig.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe den Motor schon in verschiedenen Modellen geflogen, zuletzt in einer Piper J3 Cub von Black Horse mit 2450 mm Spannweite. Mit 8S (2 x 4S 4000 mAh) und einer 18*10 Luftschraube reicht Halbgas um Scale zu fliegen.

Wunderbarer krftiger Motor, der sich bestens mit einem Schulze fut-val Regler vesteht.
Habe ca. 10 Turnigy Motoren im Einsatz, die keine Magnete verlieren und alle klaglos laufen, solange man im Dauerbetrieb nicht die max. Leistung fordert. HK ist hier mit seinen Angaben allerdings etwas grozgig.

i can't find a way to secure the prop adaptor (wrong size screws - and no info on correct size screws) or to prevent the prop adaptor from spinning in the prop (smooth adaptor face)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i can't find a way to secure the prop adaptor (wrong size screws - and no info on correct size screws) or to prevent the prop adaptor from spinning in the prop (smooth adaptor face)

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save