New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy HeliDrive SK3 Série Compétition - 4956-520kv (600 / .50 taille héli)

Turnigy HeliDrive SK3 Série Compétition - 4956-520kv (600 / .50 taille héli)

Shipped From:
  • USA
QTY:

Now save enregistrer 0,00 € 0,00 €

73,10 €
Statut:
En stock.
SKU:
9192000104
WANT FREE SHIPPING? Click here to find out more!

moteurs Turnigy SK3 Series concurrence sont le plus récent ajout à notre gamme de moteur SK3 offrant la meilleure qualité absolue, la performance et l'efficacité de votre modèle sur le plan de la concurrence. Chaque moteur SK3 Competition Series est soigneusement inspecté et testé pour assurer la haute efficacité et la performance supérieure nécessaire pour répondre aux exigences de la concurrence volant.

moteurs Turnigy HeliDrive SK3 Series Competition sont top outrunners de qualité conçus spécifiquement pour une utilisation dans la retransmission de modèles d'hélicoptères de haute performance.

Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de nombreux grands constructeurs automobiles sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur sans balai de qualité supérieure sans compromis.


* Parfait pour Trex 600 / HK600 / Raptor 50 / Gaui X6 / Logo 600 ou tout autre 600 / .50 taille hélicoptère.


Specs.
Active: 12T
Tension: 10V ~ 12S Lipoly
RPM / V: 520kv
Pôles moteur: 10
Résistance interne: 0,0214 Ohm
Max Chargement: 70A
Puissance: 3100W
Diamètre de l' arbre: 6mm
Longueur de l' arbre: 31mm
Vis Espacement de montage: 25mm / 30mm (M4)
Poids: 394g
Branchez Moteur: 4mm Bullet Connector

  • UGS 9192000104
  • Brand SK3
  • Poids 556.0000
  • Longueur 140.00
  • Packaging Width 60.00
  • la taille 95.00
  • Kv ( rpm / v) 520.00
  • Max Current (A) 70.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 45.00
  • (W ) 3100.00
  • Arbre A ( mm ) 6.00
  • Longueur B ( mm ) 56.00
  • Diamètre C ( mm ) 49.00
  • Longueur Can D ( mm ) 44.00
  • Longueur totale E ( mm ) 78.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The shaft length IS NOT 31mm, if i remember correctly it measured around 25mm? Also, keep in mind the bolt pattern is 25mm x 30mm M4 screw. Build quality is good and the finish is nice looking. Won't fit in a Goblin 630 comp. Returned product due to miss information.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The shaft length IS NOT 31mm, if i remember correctly it measured around 25mm? Also, keep in mind the bolt pattern is 25mm x 30mm M4 screw. Build quality is good and the finish is nice looking. Won't fit in a Goblin 630 comp. Returned product due to miss information.

A shame I did not see your review before buying D1ssMantle ;*(
Yes, it is a 22mm shaft not a 31mm and maybe less then not for me and my Logo... And I paid the big s FedEx shipping for nothing ! HK, change the specs please. No good for your customer !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A shame I did not see your review before buying D1ssMantle ;*(
Yes, it is a 22mm shaft not a 31mm and maybe less then not for me and my Logo... And I paid the big s FedEx shipping for nothing ! HK, change the specs please. No good for your customer !

Please note that the MAIN SHAFT LENGTH is 22mm and NOT 31mm as stated on the website and on the box. This motor will not fit a Logo 600 SE or any helicopter that has a support bearing for the motor. I have wasted almost 40 on this product just to find this out at the end. This is blatant false advertising on HobbyKing's part. Not a happy camper.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Please note that the MAIN SHAFT LENGTH is 22mm and NOT 31mm as stated on the website and on the box. This motor will not fit a Logo 600 SE or any helicopter that has a support bearing for the motor. I have wasted almost 40 on this product just to find this out at the end. This is blatant false advertising on HobbyKing's part. Not a happy camper.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save