S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy intégré PCB Micro-Quad (KIT)

Turnigy intégré PCB Micro-Quad (KIT)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
199 g
SKU:
9332000001

Combinez

et économisez plus
esc
battery
motor
acc
Description
du

Ce encore brillamment conçu Micro-Quad minuscule dispose d'un cadre de PCB intégrée, Il suffit de boulon sur les moteurs, puis souder votre choix de 6 Ampères ESC directement sur le châssis!

Un système de distribution de puissance intégré est également inclus pour une prise de neatest électronique installe autour. Tous les matériels et châssis de montage de composants sont inclus dans le kit. Tout ce que vous aurez besoin d'avoir ce petit monstre dans l'air est de quatre moteurs Turnigy T1811-2900kv, quatre 6Amp CES, un ensemble de 5x3 accessoires Micro-quad (2 horloge sages et 2 sens anti-horaire) une 2s 800mAh 7.4v batterie Lipoly, un HobbyKing de carte de contrôle multi-rotor et votre propre émetteur et le récepteur (Tx / Rx).

Caractéristiques:
Conception légère.
PCB intégré pour l'installation des composants.
Inclus un ensemble complet de châssis et le matériel de montage.

Spécifications:

Voler Poids: 145g (non compris RX et batterie)
Largeur: 250mm
Hauteur: 85mm

Obligatoire:
4 x Turnigy T1811-2900kv
4 x 6Amp ESC
4 x 5x3 Prop (2CW & 2CCW)
1 x-Rotor multi Control Board HobbyKing
batterie 1 x 800mAh 2s 7.4v Lipoly
16 x M2x8 Boulons (pour le moteur)
16 écrous x M2 (pour le moteur)
Votre propre radio et le récepteur 4 canaux.

Product
Specifications

Informations supplémentaires

  • Référence:
    9332000001
  • Brand:
    Non communiqué
  • Poids (g)
    199.00
  • Longueur
    240.00
  • Largeur:
    17.00
  • Taille:
    235.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This PCB frame is a piece of crap. It could not survive 30cm fall - after that one motor mount was broken.
This construction has a major design flaw: the hole for motor wires are placed inline with the end of the ribs - which are too short and to thin.

Maybe my frame was faulty, but when You look closer this is not sturdy FR-4

If You must have a microquad, go buy black one with integrated ESC and BEC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flew great until I crashed it from 5 feet off the ground. The motor mount is not sturdy and broke clean off. The motor mount design saved a 50 cent prop but cost me a 15 dollar frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fun little quad but kind of a pain to do all that soldering. 34 of them all together including the battery connecter. Plenty of room for a 50mm FC and RX. Indoor flyer for sure.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is well made and all, but the construction is deeply flawed. The motor mounts will break off at first impact, since someone made the bad decision to put a hole at the thinnest point. There are only a few millimeters of PCB on each side of the hole. You can easily snap it off without applying much force at all.
If you glue something on top of the hole, the complete arm will break off at the base, tearing the copper laminate. It is easy enough to repair with thin CA and some jumper wires, but the repaired places breaks even easier.
I strongly suggest building your own frame out of some scrap plywood and four 1/16 (8mm) wood spars or buying a more robust frame kit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great PCB frame, lightweight with the 1811 - 2900 motors, 5x3 props, KK2 FCB, 2S 800mAh LiPo. About 6 min flight time indoors and fast and mild acro outdoors with 6 mins. I will get a 1300 mAh 2S with my next order, the little beast can handle these LiPos easily. Great for any place at any time flying and having fun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good quad ! good shipping
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame kit, easy to assemble, werry helpful with the onboard pcb for power destribution. Did not fly yet because of propeler problems, hope to get it in the air soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice and small quad... nice to fly indoors... really impress with the way it was packed!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cool Gadget this Frame but the Motor Extensions are a bit fragile. Just Stiffen the end connections with 2k Epoxy and nothing will break. Even with hard Landings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This little frame is delivered in a surprisingly flat envelope! It may seem a bit fragile at first but some of the pieces interlock and a few drops of CA later the frame is quite sturdy.

I like the dome on top that will protect your control board in the event of a crash.

I also like the bars between the legs of the structure where you can easily strap a battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy Integrated PCB Micro-Quad

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Customer files
No File Name Télécharger maintenant [142kb]

Combinez

et économisez plus
esc
battery
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.