Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy intégré PCB Micro-Quad V2 (Noir) (KIT)

Generating Links

Turnigy intégré PCB Micro-Quad V2 (Noir) (KIT)

Prix:

Now save économisez 0,00 € 0,00 €

15,56 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9332000021-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Ceci est la version 2 de la minuscule encore brillamment conçu Micro-Quad, dispose d'un design de châssis plus fort intégré PCB et support moteur, mais conserve la même idée simpliste de boulonnage sur les moteurs, puis soudez votre choix de ESC directement sur le châssis!

Un système de distribution de puissance intégré est également inclus pour une prise de l'électronique plus jolis et les plus légers installe autour. Tous les matériels et châssis de montage de composants sont inclus dans le kit. Tout ce que vous aurez besoin d'avoir ce petit micro taille dans l'air est de quatre moteurs micro, quatre 6-12Amp ESCs, un ensemble de 5x3 accessoires Micro-quad (2 horloge sage et 2 sens anti-horaire) un 2s 800mAh ou 3s batterie Li-poly , un HobbyKing contrôle multi-rotor carte et votre propre émetteur et le récepteur (TX / Rx).

Caractéristiques:
• Conception légère.
• PCB intégré pour l'installation des composants.
• Inclus un ensemble complet de châssis et le matériel de montage.

Spécifications:
Voler Poids: 145g (non compris RX et batterie)
Largeur: 250mm ~ moyeu de 220mm au moyeu
Hauteur: 85mm

Obligatoire:
4 x Multistar DT1704 ou Turnigy T1811-2900kv
4 x 6-12Amp ESC
4 x 5x3 Prop (2CW & 2CCW)
1 x-Multi Rotor Control Board HobbyKing ou tout FC avec 45 x 45 mm de montage
batterie 1 x 800mAh 2s ou 3s Lipoly
16 x M2x8 Boulons (pour le moteur)
16 écrous x M2 (pour le moteur)
Votre propre émetteur et le récepteur 4 canaux.

  • Turnigy PCB Quad
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 23, 2016

petite drone tres facile a monter, dommage, pas difficile pour le monter, mais faut pas de grande main.

tester67 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 05, 2015

Sehr sauber gearbeite Teile, auch f?r einen Anf?nger sehr einfach zu l?ten.



Alle Bauteile vorhanden und passgenau.



KurtW | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2015

Put 2 of these frames together for a mini x8 DYS 1306 2300, MS V2 6AMP ESC, naze32 full, 6mm black nylon spacers. super strong. My favorite multirotor to fly

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2015

I never had luck with this frame. The arms flex a lot. Also there isn't a great amount of room for everything. I scrapped this frame and most of it is now in the garbage can.

Sundaram | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 01, 2015

Perfect setup for a micro quad with easy to set up kit. In just less than an hour the complete electronics was set up and ready to fly with this kit. very light and and robust kit. perfectly laser cut just locks in place all parts.

Craig | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 04, 2015

I bought this to replace my V.1 Micro Quad after I had one-too-many hard landings.

It's such an improvement over the original as it allows for through-hole soldering which makes it really easy to install or replace the electronics. There are plenty of additional power take-offs to allow you to add LED's without having to run wires from all over the frame. Also it looks MUCH cooler in black!

Anakel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 12, 2014

I never flew with this frame, but is seem to be a good little frame. Weight: 66g

Capt. Peter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 28, 2014

I bought this frame as a spare for the white ARTF. Glad i did as i smashed it up! This black frame however seem slightly stronger and holds up better to slight dings. dozens of flights later and it's still working and not been glued! Would buy again for sure!

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 10, 2014

Als Ersatz bestellt da er doch leicht kaputt geht

I.Ralenekov | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2014

This is my first micro quad and I love it. The frame is very well done and I love the black color!



My setup:

4x HK 1811 2000kv (silver motor)

4x HK 10A ESC (simonked)

HK MultiWii AIOP controller

HK Neo 6 GPS

1000mAh 3s 20C battery



It is one small beast! I will upload a video when I have some free time to shoot it.

Fichiers clients
Hasse´s Micro Quad with landing gear Download [305]
Mini X8 Download [3866]
Mini X8 Download [3866]
No File Name Download [3135]
Micro-Quad V2 Fpv Download [2672]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires