New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

TURNIGY K-Force 120A-HV OPTO V2 5-12S Brushless

TURNIGY K-Force 120A-HV OPTO V2 5-12S Brushless

Now save enregistrer 0,00 € 0,00 €

111,38 €
Statut:
Epuisé!
SKU:
9020000002
WANT FREE SHIPPING? Click here to find out more!
La série Turnigy K-Force sont basées sur un tout nouveau microprocesseur puissant habituellement réservé pour la voiture à haute vitesse ESC de. Le nouveau CPU signifie ultra synchronisation rapide de synchronisation, plus nette réponse à l'accélérateur, moins de charge de la batterie et réduit l'accumulation de chaleur FET.
'HV' indique ce modèle peut gérer jusqu'à 12S Lipoly.
Spécification:
Sortie: 120A continue, éclater 180A jusqu'à 10 secondes.
Tension d'entrée: 5-12 cellules batterie lithium ou 15-36 cellules de batterie NIMH.
BEC: Aucun.
Transmission Control Signal: système opto couplé.
Vitesse maximale;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 pôles: 35,000rpm
Taille: 88mm (L) * 55mm (W) * 15mm (H).
Poids: 125g.

Caractéristiques:
* Maintenant avec Spark Supressor
* Microprocesseur haute performance (24kHz) met en évidence la meilleure compatibilité avec tous les types de moteurs et l'efficacité de la conduite la plus élevée.
* La conception du radiateur large ouverture pour obtenir le meilleur effet de dissipation de la chaleur.
* Amélioration de la normale,, modes de démarrage très-soft, compatible avec des avions et des hélicoptères.
* Lisse, linéaire, réponse rapide et précise des gaz.
* Signal d'accélérateur transféré par le système couplé optiquement pour éviter les interférences électromagnétiques.
* Caractéristiques multiples de protection: faible protection contre les surtensions de coupure / protection / Throttle protection Over-chaleur de perte de signal
* Le mode Gouverneur pour hélicoptère.
* Le firmware de l'ESC peut être mis à jour grâce à l'adaptateur USB.
* Programmable de l'utilisateur via Tx, Carte de programmation ou d'un port USB de PC.
* Non compatible avec les cartes non de programmation esc 'K-Force ».
  • UGS 9020000002
  • Brand Turnigy K-Force
  • Capacité ( mAh ) -
  • Poids 169.0000
  • Longueur 100.00
  • Packaging Width 20.00
  • la taille 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

purchased this ESC for use with a 10S setup drawing 105 amps. On fourth use the ESC stopped, made a loud pop and burst into flames causing significant damage to my jet. The ESC was being used well within its stated voltage and current limits. I have filed a request for return of the ESC to hobby king but even if it is approved it has caused several hundred dollars of damage to my jet. I would strongly recommend a different ESC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

purchased this ESC for use with a 10S setup drawing 105 amps. On fourth use the ESC stopped, made a loud pop and burst into flames causing significant damage to my jet. The ESC was being used well within its stated voltage and current limits. I have filed a request for return of the ESC to hobby king but even if it is approved it has caused several hundred dollars of damage to my jet. I would strongly recommend a different ESC

if you are edf flyer and if you burned a lot of money for esc like me, this will be the solution. got experiences in many esc - YEP HV, hobbywing HV, ZTW HV and this gonna be the best. currently using this for stinger 90 8S setup and keep extra one for spare as it's always out of stock.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

if you are edf flyer and if you burned a lot of money for esc like me, this will be the solution. got experiences in many esc - YEP HV, hobbywing HV, ZTW HV and this gonna be the best. currently using this for stinger 90 8S setup and keep extra one for spare as it's always out of stock.

Great ESC, I have 2, both in 12S set-ups with Scorpion motors, drawing 60-85A. As with all electric installations YOU MUST MEASURE THE CURRENT the prop I was initially recommended drew way too many amps. As a rebadged Hobbywing ESC, will work with Hobbywing program box.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESC, I have 2, both in 12S set-ups with Scorpion motors, drawing 60-85A. As with all electric installations YOU MUST MEASURE THE CURRENT the prop I was initially recommended drew way too many amps. As a rebadged Hobbywing ESC, will work with Hobbywing program box.

I have 9 of these for mainly 3D planes. All running 12S. The throttle response is very fast - perfect for 3D planes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 9 of these for mainly 3D planes. All running 12S. The throttle response is very fast - perfect for 3D planes.

Got this for my HK-600 GT and it looks like it was a good decision. The spool-up is slow enough, and the governor seems to be stable. I`m using this ESC with my proven 8S 5000 mAh setup with 2x 4S. The anti-spark circuit works well. This ESC is like shooting on sparrows with huge cannons, my setup draws a maximum of 45 amps, but i don`t wanted a YEP ESC this time. Overall, i`m satisfied with this ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this for my HK-600 GT and it looks like it was a good decision. The spool-up is slow enough, and the governor seems to be stable. I`m using this ESC with my proven 8S 5000 mAh setup with 2x 4S. The anti-spark circuit works well. This ESC is like shooting on sparrows with huge cannons, my setup draws a maximum of 45 amps, but i don`t wanted a YEP ESC this time. Overall, i`m satisfied with this ESC.

Connected the K_Force 120A HV it to a Rotomax 1.20 outrunner, pulling ca. 80A on 9S with an 19x10 apc prop. Pwm 8kHz and advance 19 degrees. On the third flight the esc went up in flames.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Connected the K_Force 120A HV it to a Rotomax 1.20 outrunner, pulling ca. 80A on 9S with an 19x10 apc prop. Pwm 8kHz and advance 19 degrees. On the third flight the esc went up in flames.

Excellent quality, just added my fourth one, this time for my Kyosho Corsair 120. Make sure you get the program box for it, makes programming very easy. Made by Hobbywing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality, just added my fourth one, this time for my Kyosho Corsair 120. Make sure you get the program box for it, makes programming very easy. Made by Hobbywing.

Wonderful esc for the price! I use it in my edf with 8 cells, it pulls 110A and after each flight is barely warm. At first i was a little disappointed because when i connect the battery it doesn't emit 8 beeps (as per number of cells) but after, reading the manual, i discovered that those esc make a long beep that indicates 5s and normal beeps for any more cell, so in my case it emit one long beep and three short ones
thank you Hobbyking!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wonderful esc for the price! I use it in my edf with 8 cells, it pulls 110A and after each flight is barely warm. At first i was a little disappointed because when i connect the battery it doesn't emit 8 beeps (as per number of cells) but after, reading the manual, i discovered that those esc make a long beep that indicates 5s and normal beeps for any more cell, so in my case it emit one long beep and three short ones
thank you Hobbyking!

I can highly recommend this controller. I started 45 times this summer with this control and landed safely. I need the controller for the Rotomax engines, 1:40, 50cc, and next year, 2014, for SK3 F3A Competition Series 28 pole outrunner. With the programming card, Turnigy Multifunction LCD Program Box for Brushless ESC, it is very easy to set the controller to the motor. Thanks HK, so it makes it fun. Best regards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can highly recommend this controller. I started 45 times this summer with this control and landed safely. I need the controller for the Rotomax engines, 1:40, 50cc, and next year, 2014, for SK3 F3A Competition Series 28 pole outrunner. With the programming card, Turnigy Multifunction LCD Program Box for Brushless ESC, it is very easy to set the controller to the motor. Thanks HK, so it makes it fun. Best regards.

Rotomax 1.40, Popeller 18 x 12. The TURNIGY K-Force 120A-HV OPTO, and 2 x 5S Zippy 4000 Compact 25C, measured 65 Amps and 2300 watts. The Rotomax makes a good impression.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Rotomax 1.40, Popeller 18 x 12. The TURNIGY K-Force 120A-HV OPTO, and 2 x 5S Zippy 4000 Compact 25C, measured 65 Amps and 2300 watts. The Rotomax makes a good impression.

Customer files
User Manual Download [2507]
Manual Stick Programming Download [646]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save