Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TURNIGY K-Force 40A Brushless ESC

Generating Links

TURNIGY K-Force 40A Brushless ESC

Prix:

Now save économisez 0,00 € 0,00 €

34,94 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
KF-40A
Livraison gratuite? Cliquez ici pour apprendre plus!

La série Turnigy K-Force sont basées sur un tout nouveau microprocesseur puissant habituellement réservé pour la voiture à haute vitesse ESC de. Le nouveau CPU signifie ultra synchronisation rapide de synchronisation, plus nette réponse à l'accélérateur, moins de charge de la batterie et réduit l'accumulation de chaleur FET.

Caractéristiques:
Sortie: 40A en continu
Tension d'entrée: cellules 2-6 (5-18 cellules NiMh)
BEC: sélection de tension Lits, 5,25V et 6v.
Transmission Control Signal: système opto couplé.
Taille: 59mm (L) * 27mm (W) * 12mm (H).
Poids: 38g.

Vitesse maximale;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm

Caractéristiques:
un microprocesseur à haute performance (24kHz)
Dissipateur conçu rapidement la chaleur de dissipation.
Normal, modes de démarrage améliorés doux, très-Soft
Compatible avec des avions et des hélicoptères.
Lisse, linéaire, réponse rapide et précise des gaz.
Plusieurs fonctionnalités de protection: faible protection contre les surtensions de coupure / protection / Throttle protection Over-chaleur de perte de signal
Mode Gouverneur pour hélicoptère.
Le firmware de l'ESC peut être mis à jour grâce à l'adaptateur USB.
programmable de l'utilisateur via Tx, Carte de programmation ou d'un port USB de PC.
Non compatible avec les cartes non de programmation esc 'K-Force ».

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Gilberto/Noreen | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2016

The quality as expected BUT HOBBYKING makes people confused, as they this this product "programmable via Tx, Programming card or pc USB port." but to program by USB port yo must have the programming Card....

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 04, 2016

I use it in mini eco expert racing boats and it still good, I have it 2 years and still the best

yreew | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2015

Flew it with a 3s battery on a bixler a while a ago for a few times. After i put it in storage for a year i decided to test it as i usually do just to keep the stuff fresh. After connecting everything i revved it up on a testbench and i noticed instantaneously that it got very hot while applying only 20-30pcnt power on 3s. I pulled the power out and let it cool for a minute. After that i tried again and it bursted in smoke! If i had it in a plane it would have burned up the whole thing. Luckily it was on my test bench. Worked awsome as long as it lasted until it decided to kill itself in smoke. Nothing i would use on expensive systems. Only for some cheep epo stuff without expensive equipment.

steven | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2015

These things are awesome. The governor issue with hthe others needs to be flashed with blheli using arduino uno. I use these on my bigger rigs with high poles and low kv motors w/o heat. ONLY issue is the amount of noise on the gps frequency in some cases knocking out gps signal (bad bec) just disable bec. These are hobbywing platinum esc.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2015

good quality. Comes with motor connectors. Have to get a programming box to change parameters if you chose.

Unreal_Reaver | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 01, 2014

Mont sur un HK450, aucun problme, la configuration avec la radio est un peu particulire et je ne m'y tenterai pas, j'ai utilis le cble USB avec le programme Hobbywing et aucun problme. Fonctionne trs bien avec un Turnigy Typhoon 2218.

veector | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 19, 2014

This ESC is pretty great. The very soft start is 8 secs so you won't have a problem with that, and it barely gets warm during usage. I highly recommend NOT buying any programming card, because programming with tx might be a little scary at first but it's really really easy and fast. The usb programmer might be useful for fw updates, but I'm happy with its current state already.

Wade | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 16, 2014

Great ESC. I haven't had any problems programming this using the Turnigy Multifunction LCD Program Box. Works great every time. Haven't had it get hot and I have given it a fair bit of stick. All around great ESC!

tiagobquintao | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 16, 2013

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie. No gostei da compra. Estou arrependido.

tiagobquintao | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 16, 2013

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie.

Fichiers clients
Navod CZ Download [410]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
TURNIGY_K-FORCE-Series 40A_S1 Download [962]
TURNIGY_K-FORCE-Series 40A_S2 Download [845]
No File Name Download [962]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!