Turnigy Lipo Bunker - Lipoly Box sécurité de la charge

• Overall
• Quality
• Value

Customer Rated

Mar 06, 2016

It's a nice and sturdy box and I am sure it will survive any LiPo explosion. But it takes some time to assemble it because the production quality of the parts is not perfect. I guess this would have to be produced to 1/100mm accuracy to fit perfectly. Sometimes the hole alignment or size is just a tiny bit off and the screws drill into the sheet metal instead of the surrounding metal parts.
The metal pieces come with some protective plastic cover and it is important to remove this so that it can't burn.

• Overall
• Quality
• Value

Customer Rated

Jan 05, 2016

This thing sounds good, but the quality of the fasteners is Chinese Crappo.
They aren't tapped all the way through, so the screws only go in 50pcnt of the fasteners. If you have skillz you can tap with the screws and some oil and a good sense of torque.

Good luck for those of you who are hacks.....the screws will strip the heads before they seat in the countersink.

A five minute Gopro video turned into 2 hours to put this POS together.

Buy American! (If you can find any).... :l

• Overall
• Quality
• Value

Customer Rated

Dec 27, 2015

With no manual. I spend 1 hour building it. It was a problem with aluminum clamps. Hole in the clamp is too tight for the screw. Packaging could be better. I had 2 big scratches. Good quality stainless steel. Looks cool. I got 1 extra part .

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 12, 2015

I buyed it to fell a bit safer, while lipo charging. It is very easy to built and works good.

• Overall
• Quality
• Value

Customer Rated

Nov 01, 2015

A very nice product that looks really good. Simple to assemble, and although the panel edges are a bit sharp, the problem disappears when the pieces are bolted together. My only criticism is that I was surprised that the unit had no bushing material to insulate the cable entry.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 28, 2015

This is the most important tool on the rc world

• Overall
• Quality
• Value

Customer Rated

Oct 03, 2015

!Warning. Only 4 out of the 6 Sides are fully sealed when assembled! Apart from the obviously Vented Square Endplate where the Changing Leads are supposed to enter. The opposite Square Endplate has a 0.1mm Gap around all 4 Sides where Flames/Gasses could possibly escape.!

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 27, 2015

Nice safe box! thought and bring my peace while charging my lipos. Although it came with 1 missing little part, easy fix but not the same...

• Overall
• Quality
• Value

Customer Rated

Feb 10, 2015

No instructions! Suggest you make three sides then screw in the two end pieces. Watch out for the very sharp edges (don't ask me how I know!).
I will test this (outside in a field and in a sand pit) using one of my old 6s batteries (ie i will puncture one of the cells and see how the box copes - I will be watching from a very safe distance - just need to work out how I can do this safely)
The overall and value rating are low due to having cut my hand handling this as I unpacked it

• Overall
• Quality
• Value

Customer Rated

Sep 14, 2014

A must buy in terms of peace of mind IMO. Recently got back into racing 1/10 off-road 4WD after many years away from Nimh tech. Upgraded to Lipo and this was advised to me buy many racers/general people who run Lipo's. Quality of the item is very good, although no instructions, so a quick glance of the images on here sorts that out easy enough, but a small A5 sheet of paper with a diagram would have been nice.