S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

TURNIGY MEGA 380W Lithium Polymer Chargeur de batterie

TURNIGY MEGA 380W Lithium Polymer Chargeur de batterie

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
1293 g
SKU:
T380W
Description
du

Êtes-vous prêt pour 380W et 20A taux de charge pour votre taux de charge de C haute capables Turnigy / packs Zippy? Nous savons que la réponse est "OUI!", Nous vous offrons la Mega 380W chargeur de balance haute puissance Turnigy!

Le Mega 380W Turnigy est une forte puissance d'équilibrage chargeur / déchargeur qui peut gérer jusqu'à 6 cellules LiPo / LiFe et NiMH / NiCd jusqu'à 18S avec précision. Livré avec le Mega 380W Turnigy est un tableau de charge des fils et des bouchons, convient pour la plupart des applications.


Caractéristiques;
contrôlé par microprocesseur
sensibilité Delta-crête (NiMH / NiCd)
Personne responsable de l'équilibrage de la cellule et la décharge
Li-ion, LiPo et LiFe capable
Ni-Cd et NiMH capable
Haute puissance et un circuit à haute performance
fonction de magasin, permet au courant de stockage sûr
Le stockage des données (Stockez jusqu'à 10 paquets en mémoire)
charge Cyclique / déchargement

Remarque: Le capteur de température non comprise.

Spec.
Tension d'entrée: 11.0 - 18.0Volt
Courant de charge: 0,1 - 20.0A
Courant de décharge: 0,1 - 5.0A
Capacité de charge maximale: 380W tension d'entrée @> 15V
Capacité de décharge maximale: 25W
Consommation d'équilibrage Li-po: 200mAh / cell
Lithium count (LiPo / LiIo / LiFe) des cellules de la batterie: 1 - 6 series
NiCd / NiMH nombre de cellules de la batterie: 1 - 18 séries
Pb tension de la batterie: 2 -24V
Batterie configuration mémoires: 10
Intelligent contrôle de la température: Oui
Poids: 762G
Dimensions: 152X145X57mm

Comprenant;
1 x Turnigy Mega chargeur 380W
1 x Fiche banane w / XT60
1 x Fiche banane w / Aligator Clips
1 x XT60 Lead w / Femme Mini JST, Femme Futaba et Sockets plug
1 x paire Aligator Clips
1 x JST XH Adaptateur

Ce chargeur a une fiche d'équilibrage JST-XH, ce qui le rend compatible avec Zippy, TURNIGY et tout paquet avec un JST-XH équilibre plomb.

Remarque: L'alimentation et la sonde de température non inclus.

Product
Specifications

Informations supplémentaires

  • Référence:
    T380W
  • Brand:
    Non
  • Poids (g)
    1293.00
  • Longueur
    208.00
  • Largeur:
    74.00
  • Taille:
    200.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
So ive had this charger for about a week now and ive decided to post this review, my conclution on this charger is



-The build quality is amazing, encased in a full metal shell this feels sturdy and solid

-No power leaks, dont get shocked ever time u tought the charger like accucel 6 and 7

-Lives up to the 380w output and can charge 4s for me at 20A

-Simple to use, the buttons feel good to the touch and the firmware is easy to use and navigate around

-Comes with ample amount of charging leads and accessories, including a cool balance board



So overall a great charger for an even greater price and i would have to rccomend this charger to anyone out there!!

Great stuff hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
How can I start... I receieved this charger last week. It uses same program than imax B6 and all of those small chinese chargers, it's very easy and intuitive to use.

The real power of this charger is 240Watt at 12v... to get its 380 watt you must use 18v input and i don not know much supplies with 18v outpout.

Balancer its not much accurate, in a storage charge of a zippy 5Ah 20c 2s it remains one cell at 3.8v and the other at 3.79v, so its integrated balancer seems not much accurate. You'd better use one external for expensive batteries.

I charged Lead acid batteries at 0'1c and 0'05C, dont forguet deactivate the timer limitator and capacity limitator for huge batteries, those are preconfigurated to 120min and 5000mAh. This charger works fine with Pb.

Am very sorry but I still didn't charged any nimh so i can not review that.

Charger comes with some connectors as shown in the image.

The biggest deffect I can find is that the fan is very noisy and if it starts, always work at full power, so you cant sleep while charging batteries at high power (actually is not recommended lol).

I can find that the piece to connect 2. 3. 4. 5 or 6s to balancer is completly useless: you can connect the battery balancer plug directly to the charger while the negative pin must be always first, check it with the tester before do this.

However i have any battery that can't be charged up t
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just says connection break. I tried three different cables and batteries without luck. It will cost me more to send this back than what I would get refunded! Waste of my hard earned money... :(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works as it should. Using a pc power supply. Only negative is, the fans are very noisy. Other than that it seems to be a great charger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Been a very good charger for me. does a great job at charging my electric bike batteries. pumps out the power!. But boy is she loud, I guess those loud fans are needed with the kind of power it delivers, just make sure you get a nice big power supply for it. I'd definitly buy it again very good value for money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The charger arrived today , 12 days to new zealand, great and well packed.
There have been two issues already the supply lead is way too short, I had to add a meter of (two core cable ) to make it usable.
The white balance plug, to multie balance adaptor wouldnt fit in the hole , I bent it trying to get it in,so pulled the unit apart to fix it. I ended up shaving some plastic off the plug, The heat sink inside has been cut with a massive band saw and never cleaned up, what a mess.
Apart from that the charger works well .I have a little 50 watt turnigy and it wasnt able to charge a 6s above 86pcnt with 2.5 amps, the 380 w takes it to 98pcnt with 20 watts easily.
All up its an ok unit and I would advise others to buy it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got this charger because I have everything from ni-cads to LiIo computer pulls to charge. It seems to be a great charger...but it is kind of hard to tell without any instructions. I have used it with niXX batteries and it does a very good job at detecting delta-peaks, but until I can decipher the lithium settings I'm not going to be using it on my litho batteries. Does HobbyKing have any instructions for this charger?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Rock solid thus far.

Only reached 51C while charging a 6S pack at 12amps. Fans are loud but do a good job cooling the unit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great battery charger for the value. Cooling fans are a little noisy when loading batteries with high amperage. The display is bright and easy to read.

The buttons and procedures for the programming are the same of the other charger. Well made and sturdy housing.

Amply satisfied.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Had mine for about 2 1/2 months working fine until today. Powered it up and would not go past the start up screen, nothing. None of the buttons worked. Powered off several times nope then I lightly tapped it on my work bench and bam there it goes working again.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy 380w Mega Charger

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.