Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Mobius 2-Axis Gimbal avec Tarot Controller et AX2206 Motors

Generating Links

Turnigy Mobius 2-Axis Gimbal avec Tarot Controller et AX2206 Motors

Prix:

Now save économisez 74,69 € 74,69 €

Special Price 27,06 € 27,06 €

You save économisez 74,69 € 74,69 €

Was  101,75 €

Expédié de:
  • USA
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9171000509-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy ont reconnu le Mobius ActionCam comme aller à la caméra pour le passe-temps RC et mis à faire un faible coût, poids léger, composante de la qualité 2 axes de cardan pour correspondre à la taille réduite du Mobius.

Le Turnigy Mobius Cardan a commencé avec le populaire AX 2206 BLGM, parfait pour sa petite taille et d'être bien connu comme un grand moteur. De là Turnigy avait les moteurs fabriqués pour correspondre à leur spécification. Le Turnigy Mobius Cardan avait l'air d'un des leaders dans cardans pour leur contrôleur robuste et interface graphique facile, installer sur le Tarot 2 axes BGC comme le cœur du Mobius Cardan et comprend le programmeur USB pour les mises à jour et la configuration à venir. Turnigy a ensuite entrepris de créer un cadre léger et robuste autour du Mobius et le matériel choisi. Le résultat est l'un des meilleurs cardans disponibles et le meilleur de tous, il est fait spécifiquement pour le Mobius.

Caractéristiques:
• Poids léger
• Moteurs AX2206 Gimbal
• Tarot BGC et IMU pour le contrôle
• Stick et Rate Mode pour roulis et tangage contrôle
• RC roulis et de tangage de contrôle
• ALL CNC en aluminium et cadre composite
• outil de programmation inclus USB

* Remarque: S'il vous plaît prêter une attention particulière aux emplacements des boulons dans les instructions, et notez le moteur de hauteur utilise les 2 boulons M6, si les boulons M8 sont utilisés pourrait endommager les enroulements du moteur entraînant l'axe de tangage à secouer quand il est alimenté.

Cadre technique:
Taille: HxlxL 76x67x100mm max tout autour de la taille
Poids: 160g

Moteur Specs AX2206:
Polonais: 12N14P
KV (RPM / V): 140
Résistance: 11.25omh
Poids: 32,3 g
Wire: 0.17mm
Couple: 230g
Bottom centre de trous du centre: 16mm et 19mm
Top centre de trous du centre: 12mm

Tarot ZTX22 Specs:
Tension de fonctionnement: DC 7.4V ~ 14.8V (12V recommandé, trois piles au lithium)
Courant de fonctionnement: 200mA-500mA (tension d'alimentation de puissance et le moteur liés)
Température de fonctionnement: -15C ~ 65c
Processeur: Processeur double cœur ARM 32 bits à haute vitesse
Capteur Trois MEMS de rotor Gyroscope MEMS rotor accéléromètres
Vitesse angulaire maximale: 2000 ° / sec
Accélération maximale: 16g
La fréquence de contrôle: 2000Hz
Fréquence d'entraînement du moteur: 20KHz (pas de lecteur de lissage du bruit)
Précision de régulation: 0,1 degControl plage d'angle: -45 ° ~ 45 ° (rouleau), -135 ° ~ 90 ° (inclinaison)
Interface de puissance: DC 7.4V ~ 14.8V (recommandé 12V, batterie lithium trois)

Note: Ceci est un kit et ne nécessite un certain assemblage et un ordinateur basé sur Windows à clignoter la configuration Tarot avec l'outil USB inclus.

  • Turnigy Mobius 2 Axis Gimbal
  • <" style="background-image: url(https://img.youtube.com/vi/JjLCdvFrprk" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen>
    Turnigy Mobious 2 Axis Gimbal
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

randy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice size. Made well.

Aug 26, 2019

Looks decent . I hope the board functions properly for its unused so far.

Maximilien | Acheteur vérifié

  • Overall
  • Quality
  • Value

RAGE

Oct 13, 2018

une fois brancher sur l'ordi, mes problème en commencé. Entre l'ordi qui na pas les bon driveur un coups sur deux et le logiciel qui crash des qu'il détecte la gimball. J'en peut plus..

Lundy_ | Acheteur vérifié

  • Overall
  • Quality
  • Value

You need a bit of patience to get it working .

Mar 22, 2018

The assembly is straight forward and easy to do .But the problems started when I connected for the first time the battery, I was faced with a untamed wild jumping bronco gimbal ,that was in no way useful to take any video. Even after connecting to the configuring program I was not able to tame it.One motor was burnt through caused by the uncontrolled up and down jiggling of the gimbal, I have ordered a spare motor and could solve that part of the problem.
The program was saying the latest version software 1.5 was installed ,and all my attempts to tweak it via the configuration software failed.After hours of trying and fiddling on the settings I decided to reinstall the firmware 1.5 again ,and that solved the unmanageable gimbal in to a workable solution, I needed a long time to fine tune it but in the end its working smooth and without jiggle problems .So I think that the installed firmware was somehow damaged in some way. and now everything is working like it should do.
The construction of the gimbal is not very Mobius friendly ,the way it is to connect to the gimbal platform is a paste and cut work solution with double sided sticky tape and a rubber band ,while the camera comes with a perfect holder with camera thread, with a little creativity you can drill a hole yourself in the platform and still leave room for the gyroscope and accelerometers that are situated under the camera platform .
After this ,shall we say little set back ,I have now a nice working gimbal for little money.
Don't give up to eazy on it ,you can make it work ,it only needs a lot of your time and patience .

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 14, 2016

I have adapted the Turnigy gimbal to use the RunCam2 camera. I made an aluminium holder attaching it with four small countersunk head bolts and nuts with lock washers. Under the holder is some thin sheet lead so that when there is no power the camera is completely balanced. A couple of rubber bands hold it in case of hard landings. My videos are now very smooth and great to view.

lampo.ep | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

precio bueno y calidad tambien

Engy66 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2016

Every time that I connect the gimbal the motors do not start and the light sets at Green solid in mode Over current. Can anyone help me?

Beachcomber | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 19, 2016

Just finished installing this gimbal on my quad, for use with RunCam HD (similar in size to Mobius). Can't complain like the other reviews. Mine just works. No melting plastic, no blue smoke. Here's a couple of tips. Go to the same item at International Warehouse, and click on "videos" and "files". You'll get lots of good info. I downloaded the latest version 1.5 software before receiving my gimbal. but discovered it came with ver 1.5 in both gimbal and motor control, so I didn't need to re-flash. Will admit adjusting all the parameters was (and still is) a pain. Default settings are not for RunCam / Mobius. A couple of files suggest different settings, but I had to fiddle even with those to stop the jiggle. Still trying to fine tune, but getting pretty stable on my wobbly quad.

pardus | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2016

Didn't have luck with this. Tuning is very difficult and I could never get smooth video no matter what I tried and I tried a lot over 3 months. The motors are also way overkill for a Mobius and the whole gimbal is very heavy to carry a light Mobius. Not worth the price.

Earl | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2016

Purchase this a few weeks back and it's still not working. I'm sure its me, but getting this setup is a pain. Haven't spent a lot of time on it, but why isn't this sent already flashed so you don't have to do the find, flash and configure thing. I'd rather be flying.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 22, 2016

????? ?? ????? ??????, ?????????? ????? ??????! ???? ???????? ? ???????. ?????????? ? ?????? ???????. ???????? ??????, ????? ????????? ?????????????.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Fichiers clients
PRM0175.pdf Download [1716]
No File Name Download [21]
Revised Plate Download [95]
Tarot 2-Axis Brushless Gimbal for Gopro Download [594]
BadgerJed setup lessons learnt - Turnigy Download [319]
No File Name Download [2126]
insttruction's and link to software.doc Download [26]
Software & Config 2018.docx Download [12]
Software & Config 2018 Download [12]
mobius conf 1 Download [12]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!