New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Multistar USB BLHeli programmeur Pour V2 Multistar ESC

Turnigy Multistar USB BLHeli programmeur Pour V2 Multistar ESC

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

6,47 €
Statut:
En stock.
Poids
15 g
SKU:
9351000056-0
WANT FREE SHIPPING? Click here to find out more!

L'outil USB Multistar pour toutes V2 Multistar ESC de. La fonction de Multistar ESC une MCU ATmega qui ouvre la porte à personnalisables, firmware - La V2 Multistar est livré avec le logiciel BLheli pré-installé, et pour ceux si incliné cet outil USB facile à utiliser est disponible pour la configuration et la mise à jour via le BLHeli Suite GUI. Cela vous permet d'inverser facilement la direction du moteur sans changer les fils du moteur, régler une foule de réglage pour inclure la compensation Demag et le calendrier pour les moteurs Salut-KV avec des problèmes de synchronisation.

MultiStar CES sont un régulateur de vitesse de qualité à un prix fantastique! Conçu pour une installation simple et une configuration facile ces CES ont prouvé pour offrir une excellente performance lorsqu'il est utilisé dans des applications multi-rotor. Si vous êtes débutant dans le Multi-rotors et ont besoin d'une solution facile à installer qui est testée et éprouvée à travailler avec Multi-aérogire alors ces contrôleurs de vitesse sont faites pour vous.

Pour utiliser l'outil de programmation télécharger simplement le logiciel libre suite BLHeli brancher l'outil USB dans l'ordinateur et sélectionnez le comport, à côté connecter le câble de connexion du récepteur de l'esc à l'outil USB et mettre l'appareil sur le esc. Appuyez sur connecter et régler les paramètres au besoin et sélectionnez le flash et vous avez terminé.

Remarque: L'outil est pour la série Multistar V2 de l' ESC et l' utilisation avec le logiciel de GUI suite BLHeli, Et est pas compatible avec les autres esc de.

  • UGS 9351000056-0
  • Brand Turnigy
  • Capacité ( mAh ) -
  • Poids (g) 15.00
  • Longueur 60.00
  • Largeur 10.00
  • la taille 10.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

turnigy buenos productos y bajo costos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

turnigy buenos productos y bajo costos

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

Einwandfreie Funktion mit den 6A V2 Reglern.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Einwandfreie Funktion mit den 6A V2 Reglern.

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

I use this USB programmer with Multistar 10A and I haven't got any problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this USB programmer with Multistar 10A and I haven't got any problem.

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

Customer files
Connecting_ESC.png Download [601]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save