S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Turnigy Park250 Brushless Outrunner 2200kv

Turnigy Park250 Brushless Outrunner 2200kv

QTY:

Now save enregistrer 0,00 € 0,00 €

10,11 €
Rating:
Stock:
Poids
55 g
SKU:
Park250-2200

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Conçu pour fournir une énergie fiable et propre pour parkflyers 3D. Turnigy EasyMatch Park250 brushless outrunner fournira plus de puissance et avec son rendement élevé, de longues durées d'exécution.
Un moteur de qualité, conçu spécifiquement pour les avions conçus pour voler avec un balai outrunner 50 watts.

Spec.
Batterie: 2 Cellule /7.4V
RPM: 2200kv
Courant max: 7A
Aucun courant de charge: 7.4V / 0.45A
Capacité actuelle: 8A / 15sec
Résistance interne: 0,25 ohm
Poids: 14g (non compris les connecteurs)
Diamètre de l'arbre: 2mm
Dimensions: 35x23mm

Obligatoire;
10A ESC
2S Li-Po / 6 cellules Ni-MH / Ni-Cd
5.5x4.5 ~ 8x6 (SF) prop
Convient pour le sport et l'échelle des avions pesant 6 à 12 onces (170g-340g).

Product
Specifications

Informations supplémentaires

  • Référence:
    Park250-2200
  • Brand:
    Turnigy
  • Poids (g)
    55.00
  • Longueur
    65.00
  • Largeur:
    40.00
  • Taille:
    40.00
  • Kv ( rpm / v)
    2200.00
  • Max Currents (A)
    7.00
  • (W ):
    50.00
  • Longueur B ( mm ):
    26.00
  • Longueur Can D ( mm )
    14.00
  • Max Tension (V)
    7.00
  • Arbre A ( mm ):
    2.00
  • Unit Weight (g):
    14
  • Diamètre C ( mm )
    23.00
  • Longueur totale E ( mm )
    35.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor is ok. Simpler Brushless motor but is sufficient for my small park flyer. If you would like a better quality motor I would take a step up to a little bit more expensive Turnigy motor. Overall I have very good experiences with the Turnigy Brushless motors. The used Allen Keys are however 1 step too small from my opinion (1 mm).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I chose this motor to match with my newly purchased Mini Crack Pitts Biplane. The motor that was recommended for this EPP shocky was too expensive, in my opinion. I've found that this Park250 motor works just fine without any problems at all. This is a fine motor as advertised.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Runs like a champ on my scratch built, 3-channel twin tail-boom foamie trainer in a pusher configuration. Paired it with a HK Blue Series 12A ESC, Zippy 2S 800 & 1000mah packs, and a Gemfan 7x3.8SF trimmed down to 5.75" and the tips profiled like a stock one. That setup has more than enough power for a model with an AUW of 215 grams; I almost never go WOT, but it still stays pretty cool when I do!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very little high quality motor. Just be aware that to use (AFAIK) the Propadapter instead of the Prop Saver you have to push the Shaft trough (you can bend the shaft) or replace the shaft...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are quickly becoming my favourite motors. I have 2 of these on a park size cargo plane and it flies with ease. Also great for small scale warbirds.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Grabbed this little motor for my Bonsai wing - right off the bat it was very difficult to mount properly. After managing to mount the thing the prop saver ended up being too small to be usable with any prop. Took a chunk out of the back of the wing from the prop wobbling around. Flipped it around and used it on my scratch build - on the maiden, it was more tail heavy than I expected, and backflipped, landing on the nose. This relatively slow drop from 2m managed to snap the shaft clean off. Oh well. I'd suggest grabbing the AX 2100kv motor for your Bonsai wing.
Anyway, if this motor is suitable for your uses - it does not come with pre soldered connectors. MAKE SURE you grab a 1.3mm hex wrench for the grub screws on the mount and supplied connectors, or you'll have a hard time getting it on your plane. The prop adapter is handy, but make sure the prop is spinning the opposite way of the thread, or it'll unscrew in flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unfortunately, I can't give this motor all 5's. As other reviewers have mentioned, unless it works for you as-is with the prop saver, buy another motor.

The hex wrench sizes for this motor are not supplied. They are microscopic to the point of being practically unobtainable. You need at least a 0.5mm - let me repeat, that's not 0.05" folks. It is a 0.5mm wrench that practically does not exist. It is not part of the standard DIN series of wrench/screw sizes.

Working past that problem by ignoring it, using the supplied prop adapter is virtually impossible. As other reviewers have stated, it is impossible to use the given shaft with the prop saver. I destroyed my motor just trying to remove the shaft - and I do this on other motors on a regular basis. Unfortunately, just a cheap knockoff. The bell housing is actually two pieces press fit together - the rim and the face. It came apart while extracting the shaft. I ended up with a fistful of broken parts. Oh, well.

Use this motor if you are ok with the prop saver setup. I will try to use the other of the two I bought from HK this way.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Motor itself is great. I used it for a beginners microquad. With 3S and 5045 props it has plenty of thrust for a small quad. Motor gets only a little warm. The only serious downside is the included prop adapter. It is garbage. Do not use them as the shaft hole is highly eccentrical and the headless screw is way to weak to fix the adapter on the shaft while tightening the wingnut. That destroys the good pricepoint as you have to buy additional adapters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Un max de traction en 2S 300mA Nanotech et une 6x3 GWS pour un racer EIM.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A real screamer. Used it for the Hobbyking Windragon and improved performace a lot without losing flight time. Also used in the mini stik balsa kit with good results.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.