Conçu pour fournir une énergie fiable et propre pour parkflyers 3D. Cette outrunner brushless fournira plus de puissance et son rendement élevé, courir à long temps.
Un moteur de qualité, conçu spécifiquement pour les avions conçus pour voler avec un balai outrunner 85 watts.
Batterie: 2 ~ 3 cellules /7.4~11.1V
Courant max: 9A
Aucun courant de charge: 11V / 0.5A
Résistance interne: 0,18 ohm
Poids: 25g (non compris les connecteurs)
Diamètre de l' arbre: 3mm
Données de test:
7.4v - 8x4.3 prop - 8.5A - Thrust 355g
11.1v - 7x3.5 Prop - 7.2A - Thrust 420g
Kv ( rpm / v)
Max Currents (A)
Longueur B ( mm ):
Longueur Can D ( mm )
Max Tension (V)
Arbre A ( mm ):
Unit Weight (g):
Diamètre C ( mm )
Longueur totale E ( mm )
Résistance ( mh ):
Very powerful motor! No competitor in its price range. Excellent equipment and packaging that can be used to store useful things. It comes with a spare shaft. It is recommended for aircraft weighing up to 250 grams.Has to be one of the best packaged motors i've had, arrvied in a clear case with prop adapter/screws/motor mount & spare shaft. Ordered at same time as the skywalker mini, but find it too big to mount on the wing.Great little motor. I have been using mine for foam board planes. produces way more than enough power for most of them. the motor comes with an extra shaft, prop saver - no O-rings with mine, and the motor mount with screws. you will need your own connectors as mine did not have any. 2MM connectors will work fine. Great deal.It is a shame that the shaft con not be changed as I would have liked it to be longer on the non mounting face. Looks like a mod to the model or else try a different motor.Tried to turn the shaft around. .Heated it, screws out, everything, finally damaged the bell trying to push it out. Has some kind of lock-tite on it and can't get it out.
No good now.Nice motor - small light and powerful - I'm using to replace a brushed 380 and this is 1/3 the weight and 1.5 x the power - really makes a difference. - also the ability to mount the prop on both sides is a nice feature.not to happy with the windings on thesenot very happy with hte overall quality of these motors. the winding are poor.Perfect motor for my F3P plane! I will use with Turnigy Nanotech 460mah, 8-10A ESC and 8x4,5 propIt's got some power. Ran it on a 3s & 8x4 prop on an cub and kept it flying well at half throttle. Put a 2s & 9x6 prop also flew well on half throttle. I have since bent the shaft from multiple crashes and the replacement is out of stock. I am going to try and salvage one out of an old cd rom drive as I have herd that works well.