New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy RotoMax 100cc Taille 167kv Brushless Outrunner Motor

Turnigy RotoMax 100cc Taille 167kv Brushless Outrunner Motor

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

297,44 €
Statut:
En stock.
SKU:
MAX100
WANT FREE SHIPPING? Click here to find out more!

Améliorez votre modèle de moteur à gaz de taille de 100cc avec le moteur outrunner Turnigy RotoMax 100cc Brushless. Ce moteur fournira de l'énergie propre et efficace pour votre avion à grande échelle sans le gâchis et les tracas de carburant.

Lorsqu'il est combiné avec une batterie 12s Lipoly, moteur 27x12 Hélice et ESC 250Amp l'RotoMax fournira punchy, puissance réactive que seule une installation électrique peut fournir.

Ce moteur est particulièrement adapté pour la fibre de carbone et des hélices en bois et dispose d'un style 6 conception de trou de boulon IC. L'arbre a également été choisi pour convenir à un boulon 5mm pour faire monter un spinner de votre choix facile.

Spec.
Batterie: 12 cellules / 44.4V
RPM: 167kv
Courant max: 170A
Watts: 7992w
Aucun courant de charge: 44V / 4.5A
Résistance interne: 0,021 ohm
Poids: 2074g
Count Pole: 24
Diamètre de l' arbre: 10mm
Suggestion ESC: 250A 12S Compatible
Suggestion Prop: 27x12

  • UGS MAX100
  • Brand RotoMax
  • Poids 3083.0000
  • Longueur 220.00
  • Largeur 140.00
  • la taille 170.00
  • Kv ( rpm / v) 167.00
  • Max Current (A) 170.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 44.00
  • (W ) 7992.00
  • Arbre A ( mm ) 10.00
  • Longueur B ( mm ) 114.00
  • Diamètre C ( mm ) 110.00
  • Longueur Can D ( mm ) 53.00
  • Longueur totale E ( mm ) 150.00
  • Rotomax 100cc Motor
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Fly him in my 2,7m Edge 540 V3 from Black Horse. 12s 16000mAh Multistar, Prop 28x10 Mejzlik, ESC Delux250. Flying time near 15 Minutes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fly him in my 2,7m Edge 540 V3 from Black Horse. 12s 16000mAh Multistar, Prop 28x10 Mejzlik, ESC Delux250. Flying time near 15 Minutes

Fitted this motor in my sukhui 2.6m with delux 250 amp esc very smooth power control nano tech 12s/5000 65/130 prop 27/10 excellent

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fitted this motor in my sukhui 2.6m with delux 250 amp esc very smooth power control nano tech 12s/5000 65/130 prop 27/10 excellent

I am running this motor on a 100cc aeroworks extra 300, setup is rotomax 100 with 27x12 xoar cf prop, 300 amp alien systems esc, 4 x 6s 5300 mah batteries. A 6 minute flight with hard aerobatics uses only 6200 mah out of 10600 mah. I have timing set to 22 degrees and pwm at 8khz. I might try 25 degrees but everything is very cool to the touch after the flight. this could possibly use a little bigger prop as well. like a 28x12 plane flies great and power is just right for 3d and aerobatics.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am running this motor on a 100cc aeroworks extra 300, setup is rotomax 100 with 27x12 xoar cf prop, 300 amp alien systems esc, 4 x 6s 5300 mah batteries. A 6 minute flight with hard aerobatics uses only 6200 mah out of 10600 mah. I have timing set to 22 degrees and pwm at 8khz. I might try 25 degrees but everything is very cool to the touch after the flight. this could possibly use a little bigger prop as well. like a 28x12 plane flies great and power is just right for 3d and aerobatics.

I am using the motor in a 33pcnt Pitts Python that has been converted from gas, and this works very well.

The rest of the setup is a Xoar 28x10 prop, 12S2P Turnigy Nano-tech 45C 5000mAh batteries and a MGM-Compro X-series 250A controller. This combo pulls 165A and I get 6300rpm on this prop, thrust is plenty good for the aircaft. I can fly hard aerobatics for 6 min. with a good reserve on the batterypack after landing, and the motor is not even warm after such a flight. Very happy with the motor so far!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using the motor in a 33pcnt Pitts Python that has been converted from gas, and this works very well.

The rest of the setup is a Xoar 28x10 prop, 12S2P Turnigy Nano-tech 45C 5000mAh batteries and a MGM-Compro X-series 250A controller. This combo pulls 165A and I get 6300rpm on this prop, thrust is plenty good for the aircaft. I can fly hard aerobatics for 6 min. with a good reserve on the batterypack after landing, and the motor is not even warm after such a flight. Very happy with the motor so far!

Before this engine I can only warn! Looks pretty professional, its quality is rather poor! The coils are wound in cross directions, and the connection wires are not properly tinned. Burned my motor controller therefore has 2 HobbyKing has the motor is replaced, the controller is not. Financial damage -
2 x Controller $ 230.88 postage $ 61.06 new controller damage to the model!
Registration of complaints HobbyKing = 5 months!
Complaint, the controller = no answer!
And all this for $ 53 orders of more than $ 10,000 purchase price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Before this engine I can only warn! Looks pretty professional, its quality is rather poor! The coils are wound in cross directions, and the connection wires are not properly tinned. Burned my motor controller therefore has 2 HobbyKing has the motor is replaced, the controller is not. Financial damage -
2 x Controller $ 230.88 postage $ 61.06 new controller damage to the model!
Registration of complaints HobbyKing = 5 months!
Complaint, the controller = no answer!
And all this for $ 53 orders of more than $ 10,000 purchase price!

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far. The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far. The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.

The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.

The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.



The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.



The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

Customer files
Dimensional Drawing Download [80]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save