New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy SK3 90mm (8S 3000w) Fandrive Brushless EDF Motor - 3968-1500KV

Turnigy SK3 90mm (8S 3000w) Fandrive Brushless EDF Motor - 3968-1500KV

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 11,84 € 11,84 €

Special Price 34,19 € 34,19 €

You save enregistrer 11,84 € 11,84 €

Was  46,03 €

Statut:
En stock.
SKU:
9192000089
WANT FREE SHIPPING? Click here to find out more!

Moteur Parfait pour le 12Blade Fan Changesun 90mm de 6s ou 8S! Oui, thats 8S droite

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Remontage: 1.5V
Tension: 8S Lipoly
RPM / V: 1500kv
Résistance interne: 0,012 Ohm
Max Chargement: 110A
Puissance: 3000W
Shaft Dia: 8mm
Poids: 363g
Branchez Moteur: 4mm Bullet Connector
Pour 90mm Unités EDF

  • UGS 9192000089
  • Brand SK3
  • Poids 522.0000
  • Longueur 145.00
  • Packaging Width 50.00
  • la taille 100.00
  • Kv ( rpm / v) 1500.00
  • Max Current (A) 110.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 30.00
  • (W ) 3000.00
  • Arbre A ( mm ) 8.00
  • Longueur B ( mm ) 68.00
  • Diamètre C ( mm ) 39.00
  • Longueur Can D ( mm ) 68.00
  • Longueur totale E ( mm ) 92.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Love this motor in the Changesun 90mm 12 blade EDF. Gives 3000watts of power on 8S with a great sound as mounted in a Freewing F-15. So good I bought 3 more for future use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this motor in the Changesun 90mm 12 blade EDF. Gives 3000watts of power on 8S with a great sound as mounted in a Freewing F-15. So good I bought 3 more for future use.

https://www.youtube.com/watch?v=xP6ZXGBbNcQ ADD THIS LINK TO YOUR BROWSER JUST COPY AND PAST IT IN TO YOUR BROWSER

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

https://www.youtube.com/watch?v=xP6ZXGBbNcQ ADD THIS LINK TO YOUR BROWSER JUST COPY AND PAST IT IN TO YOUR BROWSER

I ended up installing this motor with a 90mm changesung 12 blade fan and installed it in to my fly fly T45.I must say the motor runs smooth with out any issues and has plenty of thrust.I am very pleased with its performance.here is a video.

https://www.youtube.com/watch?v=xP6ZXGBbNcQ

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ended up installing this motor with a 90mm changesung 12 blade fan and installed it in to my fly fly T45.I must say the motor runs smooth with out any issues and has plenty of thrust.I am very pleased with its performance.here is a video.

https://www.youtube.com/watch?v=xP6ZXGBbNcQ

I used this motor in the "High Performance 90mm 12 blade fan" (Change Sun), powered by 8S 5000mAh Turnigy 40C Lipos. Starting power is 3000W, settling to ~2700W mid flight. Note that I limit the throttle output initially as 1500Kv is a bit high on 8S, so this avoids blowing the 120A ESC. After the Lipos have lost some of their initial charge I flick a switch on the Tx to enable full power. The motor is smooth and tough. It replaced a different motor that was recommended for that fan, but it blew on climb-out. No problems with this motor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used this motor in the "High Performance 90mm 12 blade fan" (Change Sun), powered by 8S 5000mAh Turnigy 40C Lipos. Starting power is 3000W, settling to ~2700W mid flight. Note that I limit the throttle output initially as 1500Kv is a bit high on 8S, so this avoids blowing the 120A ESC. After the Lipos have lost some of their initial charge I flick a switch on the Tx to enable full power. The motor is smooth and tough. It replaced a different motor that was recommended for that fan, but it blew on climb-out. No problems with this motor!

received this edf motor in its own turnigy box was well packed will post a review in the future once i install it in to my MB339 jet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

received this edf motor in its own turnigy box was well packed will post a review in the future once i install it in to my MB339 jet

Top quality motor for EDF. Fits Changesun 90mm 12 blade (with 8mm adapter).

Perfect for 7S and 8S.

8S peak 3100watts/107amps settles to 2950watts/104amps
7S settles to 2400watts/94amps

The CS fan must be of the stronger version or the risk of fan failure is high. The fan must be secured to the adapter with a sandpaper washer in between to prevent slippage at high power (which will throw off any dynamic balancing you may have performed. Do not run fan at high power unless it has bee properly dynamically balanced or fan failure is likely. If you don't know how, get some help from and experienced EDF builder.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top quality motor for EDF. Fits Changesun 90mm 12 blade (with 8mm adapter).

Perfect for 7S and 8S.

8S peak 3100watts/107amps settles to 2950watts/104amps
7S settles to 2400watts/94amps

The CS fan must be of the stronger version or the risk of fan failure is high. The fan must be secured to the adapter with a sandpaper washer in between to prevent slippage at high power (which will throw off any dynamic balancing you may have performed. Do not run fan at high power unless it has bee properly dynamically balanced or fan failure is likely. If you don't know how, get some help from and experienced EDF builder.

I use this motor on a 12 Blade CS with 8 cells 2X 35C 4c 4500, The numbers I got are battery @ 33.38v 2773.7Wp 100.29Ap 18.8Wh......

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor on a 12 Blade CS with 8 cells 2X 35C 4c 4500, The numbers I got are battery @ 33.38v 2773.7Wp 100.29Ap 18.8Wh......

This motor fits perfectly in the CS 90mm duct fan.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor fits perfectly in the CS 90mm duct fan.

this engine and very good and powerful
I'm using in my edf 8S to 11 blades made, hand here is the video

https://www.youtube.com/watch?v=-6yaCopuwg8

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this engine and very good and powerful
I'm using in my edf 8S to 11 blades made, hand here is the video

https://www.youtube.com/watch?v=-6yaCopuwg8

Was put to a 12blade changesun EDF. Smooth, vibration free operation and 7.7Lbs static thrust at 2800W. Temp went to 42Cel at full throttle after 5X 4sec bursts. Not bad at all... Sorry Atom smasher but either you did not test this yourself or something else is going on??? You tell us...! but this is 3Kw motor and not 1500W. Of course this at 8s but even at 7s I would expect 2400W. Please re-do test and post correct results. By the way,I am a tough customer on giving high ratings but this a great motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was put to a 12blade changesun EDF. Smooth, vibration free operation and 7.7Lbs static thrust at 2800W. Temp went to 42Cel at full throttle after 5X 4sec bursts. Not bad at all... Sorry Atom smasher but either you did not test this yourself or something else is going on??? You tell us...! but this is 3Kw motor and not 1500W. Of course this at 8s but even at 7s I would expect 2400W. Please re-do test and post correct results. By the way,I am a tough customer on giving high ratings but this a great motor.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save