S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy super cerveau 80A Brushless ESC

Turnigy super cerveau 80A Brushless ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
69 g
SKU:
TSB80A

Combinez

et économisez plus
acc
Description
du

microprocesseur ultra rapide contrôlée, extrêmement faible conception de circuit de résistance et de la puce, et un dissipateur thermique en aluminium pour une meilleure dissipation thermique sont quelques-unes des caractéristiques de la nouvelle gamme TURNIGY Super cerveau des régulateurs de vitesse brushless.
Le brushless esc super cerveau est un ESC de haute performance capable d'une utilisation standard et de la concurrence.
Protection complète, y compris la perte de signal, température excessive.
Programmable par USB, PC ou votre Tx.
Compatible avec tous les systèmes de radio.

Caractéristiques:
Prise en charge de la «Turnigy USB Linker» pour programmer le ESC par ordinateur.
Internet extensible firmware ESC.
Enregistreur de données de vol intégré, enregistre les données pour le vol ENTIER tels que:
- Tension
- Courant
- Température
- RPM du moteur
- Voyage d'accélérateur

Réglages programmables;
Démarrage (par défaut Standard / Doux / dur)
coupure basse tension (par défaut 6.0 / 7.2 / 8.4 / 9.0 / 12.0 / 15.0 / 18.0V)
Limitation de courant (par défaut Standard / Très sensible / Insensibilité / Désactivé)
Brake (par défaut Aucun / mou / dur)
taux de PWM (12/08/16 KHz)
Timing (par défaut Auto / Bas / Moyen / Haut)
Type de coupure (par défaut Hard / Soft)
Mode Gouverneur (par défaut Auto / Low / High)

Spec.
Courant constant: 80A
Burst actuelle: 90A
Batterie: 2-6S Lipoly
BEC: 5V / 4A (Switching BEC, prend en charge plus de 4 servos numériques)
Type de moteur: Brushless
Taille: 71 x 26,5 x 15mm
Poids: 52g
gamme Throttle: 640us

** Programmable avec la boîte de programmation Turnigy et Turnigy USB Linker, voir les articles connexes ci-dessous.
Nous suggérons aux clients de ne pas programmer le esc avec leur Tx.

Product
Specifications

Informations supplémentaires

  • Référence:
    TSB80A
  • Brand:
    Non
  • Poids (g)
    69.00
  • Longueur
    150.00
  • Largeur:
    17.00
  • Taille:
    105.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is the second one of these I have purchased running it in a Copterx 500, no real soft start and govenor mode is rubbish too, waste of money in my opinion....................................................................................................................................................................................................................................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall a great esc, a little to short battery cables and the current recorder is way off. Compared to my EagleTree v3 logger this is measuring about 20A to LOW!!! WTH! Have ordered one more, so will compare that aswell, maybe its just a fault on this particular esc, perhaps there is a newer firmware that will fix this issue... And also the weight is not 52g but 57,5g.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I don't know what happened to my original review, but here goes again! I'm using this on a HK500TT FBL. I had brownout problems with the FuBar controller, and only partially solved them by fitting a 10,000uf capacitor. I then fitted a Hobbywing 8A UBEC, and that resolved the problem. I don't think the 4A SBEC in the Superbrain is quite up to running digital servos on a 500 size FBL heli, particularly with a V-Bar or clone type FBL controller, since they seem to be prone to browning out at relatively high voltage. I've since removed the UBEC, and run directly off a small 2s LiFe pack. I have the Superbrain ESC lead connected to a servo extension, with the red ( ve) lead disconnected from the servo extension. With the extension lead conveniently mounted on the outside of the heli, I can easily disconnect the ESC lead to hook up to the USB linker to upload my data logs. The data-logging is the thing I like best about this ESC, and I also much prefer programming the ESC from the software to doing it with the TX. All the Superbrains also have a really tight governor mode. The gain is so high, however, that you have to avoid switching between flight modes with different flat throttle curves, unless your TX has a delay function built in. Otherwise, you can wear out the OWB in a very short time. Instead, I set up a mix in my TX, to add throttle using one of the Aux levers, which become
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Dobry regulator. W 100pcnt procentach kopia HiFei seria G tylko z logerem. Dziala na oprogramowaniu producenta oryginalu
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
With the data logger, it's really easy to find the best combination (brusless, ESC, propeller). Just check your real flight parameters (A-current, V, RPM, Temperature, ... ) and find easily the best propeller. Don't forget to buy the USB linker.
Will buy this ESC next time for sure.
Great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good product, I am using it with my Ultra Stick 40 size. Don't set the start up speed to normal though, far too slow for aerobatics. Mine is now set to Fast Start and all is good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got this 5days ago, fast shipping etc and so far I am impressed with it. My firmware is probably the latest ending something like 2524 **12MB 8004 so I didn't do any update. First flight: settings I chose needed tweaking so I changed the settings and timing etc and it flew well on governor mode low, I had linear throttle with throttle hold. Excellent ******
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mit Abstand einer der Besten Regler im 80A Bereich, sehr feinfuehliges regeln, kein stottern wie bei anderen Reglern, der 4A BEC versorgt auch 5 Digital Servos ohne Probleme, absolutes TOP PRODUKT, kan ich nur empfehlen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great except for the brake. I'm using a folding prop on a 4m sailplane, and the brake make a loud noise but does not stop the prop spinning enough for it to fold. I have to nose-up and stall the glider, before the prop will stop spinning and fold. This happens even with the Hard Brake option (there seems to be no difference between Hard and Soft brake).
Otherwise it is great, and the built-in logger is very useful to see how the motor and battery are performing. My setup pulls 77A peak on 4S, averaging about 70A, and I run it for about 20 to 30 seconds each time. The ESC is barely warm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My favorite ESC, have over 10 of them, all in planes from 80cm up to 2,3m, soarer, speeder, parkflyer. from 20A up to 70A continus, from 3s up to 6s, works well. The only motor he was killed by, is an scorpion 4025-1390, that one is too much for him.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.