Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy T600 Brushless Outrunner pour Heli 600 (1400kv)

Generating Links

Turnigy T600 Brushless Outrunner pour Heli 600 (1400kv)

Prix:

Now save économisez 0,00 € 0,00 €

74,17 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
T600-1400
Livraison gratuite? Cliquez ici pour apprendre plus!
Est-ce votre 600 héli prêt pour le prochain niveau de performance ?!
Nous ne retournerons plus vous dire que de vous les boulons de héli sont serrés et les principaux engins dents sont maillés correctement, assurez-vous parce que ce moteur est un monstre de couple!
 
Caractéristiques:
Dimension: 58mm x 49mm, 78mm (avec arbre)
Poids: 349g
Kv: 1400rpm / V
Active: 8T
Tension: 5 ~ 8S
Max actuel: 110A
Diamètre de l' arbre: 6mm
Longueur de l' arbre avant: 21mm
ESC: 150A
 
 
  • Kv ( rpm / v) 1400.00
  • Max Current (A) 110.00
  • Résistance ( mh ) 7.00
  • Max Tension (V) 30.00
  • (W ) 3250.00
  • Arbre A ( mm ) 6.00
  • Longueur B ( mm ) 57.00
  • Can Diamètre C ( mm ) 49.00
  • Longueur Can D ( mm ) 33.00
  • Longueur totale E ( mm ) 78.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

LikarD | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 05, 2014

Hi, I use this motor on my HK550GT and it runs great on 6S, very powerfull and for my soft 3D flying does the job very well. After 6 min flight it is a little hot, but not too much. I use yep 150 ESC with it and 5000MAh Zippy 40C LiPo. The performance for my opinion is very good.

For motor mounting i had to make a small mod by cutting some carbon frame, but no big deal - very easy to modify and it is worth doing it.

Alex | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Aug 20, 2014

15 minutes of fligh with a 13T pinion, 2 zippy batteries in parallel 2700mah 6s, throttle at 54pcnt at max point and 12 pitch, obviously not 3D flight but awesome performance of this motor, only issue is that l had to break it apart to apply some CA between the shaft and the stator because after the first flight it got loose

terry | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Mar 07, 2014

i purchased one of these for my hk600 heli yes you do have to take a small amount of frame away with a dremel so it misses the rotor it took me 5 minutes to do this its no big deal,well worth the bother for the extra bit

themerl69 | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 19, 2013

awesome power but it will require atleast 150 amp esc, i purchased the turnigy delux 100amp esc and it cant handle this motor with 550mm blades on my new hk550tt fbl. dont use it with anything smaller than 150amo esc. i hope someone read this and dont make the mistake i made .now i have to buy a bigger esc.

$anta | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 11, 2013

Doesn't fit the HK 600GT frame without modification,had it said this wouldn't of brought it.

Ingo | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

May 09, 2013

Achtung!
Motor passt nicht in den hier angebotenen HK-600 GT

Advice:
these motor doesnt fit into the HK-600 GT

PPact | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 03, 2013

Second purchase. Fitting to hk550 gt . If it performs as well as the first one I will be stoked.

jhebbel | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Mar 12, 2013

This motor only gets a 4 crown for overall rating because it is advertised as a 600 size motor yet does not fit a T-Rex 600 without modification. Frame has to be trimmed to allow for it width but after modification it works just fine in the 600. Also be nice if it included the mounting bolts and a pinion, the included bolts and pinion in T-Rex kits are not the right size.

ARCDIRECT | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Dec 09, 2012

I bought this motor last year for my hauya 7 blade 4" edf , and didnt try it till this .What a power house at low cost, though i had to enlarge the housing in the fan to fit it .Well worth ,on 7S i get about 8.5 LB thrust at 127Ap close to 3000Wp .And i gone try it on 8S or 10S to see how much more can I get out it .

tacoluca | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 16, 2012

great product, recommended!

  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!