Shipped From:
  • UK
  • United States (US)
  • Global
  • Australia (AUS)
  • EU

Turnigy Talon Hexcopter (V1.0) Frame Carbon Fiber - 625mm

Turnigy Talon Hexcopter (V1.0) F...

Le cadre Turnigy Talon V1.0 Hexcopter est fabriquée à partir véritable fibre de carbone de haute qualité offrant à la fois de grands regards et de performance. Nos ingénieurs ont voulu créer un cadre Hexcopter sans compromis, plusieurs matériaux ...

Now save enregistrer 12,85 € 12,85 €

Special Price 51,43 € 51,43 €

Now save enregistrer 12,85 € 12,85 €

Was  64,28 €


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!


Le cadre Turnigy Talon V1.0 Hexcopter est fabriquée à partir véritable fibre de carbone de haute qualité offrant à la fois de grands regards et de performance. Nos ingénieurs ont voulu créer un cadre Hexcopter sans compromis, plusieurs matériaux ont été testés et rejetées jusqu'à ce que ils ont décidé que seule la fibre de carbone véritable répondrait aux objectifs que nous nous étions fixés pour atteindre. Chaque composant a été pesé et mesuré le rasage de simples grammes, si possible, pour atteindre un poids léger mais cadre extrêmement rigide. Nous ne permettre aucun compromis ni si vous.

La capacité de levage supplémentaire d'une configuration hexagonale rend ce cadre idéal pour transporter de plus grandes charges utiles telles que des systèmes de caméras et d'autres composants électroniques. Ceci en fait une plate-forme de caméra exceptionnelle ou simplement un cadre multi-rotor très agile et puissant pour la voltige!

Le Talon Hexcopter est construit à partir des mêmes composants de haute qualité qui sont utilisés dans le cadre Talon V2 Quadcopter très populaire, mais nous avons repensé le cadre principal pour une utilisation dans une configuration hexagonale.

Au cours du développement de la V2 Talon notre équipe a pris le cadre Talon déjà populaire et a étudié la conception, basé sur les commentaires de la communauté multi-rotor et de nos propres idées que nous re-conçu le moteur des plaques permettant un montage supérieur ou inférieur de 28 et 35 de montage taille des moteurs brushless outrunner (voir photos pour référence des différentes options de montage). Seul le système de serrage amélioré subi 3 re-conceptions jusqu'à ce que nos ingénieurs étaient convaincus que la force parfaite et le poids combiné d'économie ont été atteints. Le système de serrage de châssis central a presque doublé de taille pour assurer une forte accolade sur chaque flèche. Chaque aspect de ce cadre a été examiné à fond et de la pensée à travers.

Toute cette attention au détail a abouti à l'élégante simplicité qui est le Talon Hexcopter, un cadre Hex que nous sommes aussi fiers de mettre notre nom derrière comme vous serez à posséder.

Nous offrons également une gamme complète de produits électroniques de qualité multi-rotor comme le multi-rotor carte de commande, ESC, moteurs et plus, donc il n'y a pas besoin de faire des compromis sur votre configuration de l'électronique soit!

Poids: 440g (w / out électronique)
Largeur: 625mm
Trous Motor Bolt: 16/19 / 25mm

A besoin:
moteur brushless outrunner 28-XX ou 35-XX x 6
18 ~ 25A brushless ESC x 6
8x4 ~ 10x4.7 hélice x 6 (3 standard de rotation / 3 inverse)
Multi-rotor carte de commande
2500 ~ 3300mAh 11.1V LiPoly
4CH Émetteur et Récepteur

Fiche Technique

Informations supplémentaires

  • Count lame:
    Non communiqué
  • Diamètre X ( pouces ):
  • Référence
  • Watt Hour
  • Poids (g):
  • Longueur:
  • Largeur
  • Taille

Écrivez votre propre avis

Seuls les utilisateurs qui se sont identifiés peuvent faire partager leurs remarques. Veillez vous identifier ou vous enregistrer

Looks very good quality and sturdy but I haven't built it yet.
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
Good workmanship, everything fits well and is quickly assembled.
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

-No instructions
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
View all reviews
  • Turnigy Talon Hexcopter Frame

Upload video

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.