S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy TG9 9g / 1,6 kg / 0.12sec Micro Servo

Turnigy TG9 9g / 1,6 kg / 0.12sec Micro Servo

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
17 g
SKU:
TG9
Description
du
Turnigy TG9, 9 grammes micro servo.

Taille: 23x11x29 mm
Tension: 3v ~ 6v
Poids: 9g / 0,32 oz
Vitesse: 0,12 sec / 60 (4.8V)
Couple: 1,6 kg-cm
Temp de travail: -30C ~ 60C
Bague
en Teflon, fil 19cm, moteur coreless
Servo bras et vis inclus

Ce produit a été testé et approuvé CE.

Product
Specifications

Informations supplémentaires

  • Référence:
    TG9
  • Brand:
    Non communiqué
  • Poids (g)
    17.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Vitesse ( Sec / 60deg )
    0.12
  • Couple ( kg ) ( min . 0,01 kg )
    1.60
  • Unit Weight (g):
    9
  • A (mm):
    30.00
  • B ( mm )
    23.00
  • C ( mm )
    25.00
  • D (mm):
    12.00
  • E ( mm ):
    32.00
  • F ( mm)
    16.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
So its a nice little package and looks nice, good for the price and what not. But....... It really is what you pay for.



Very slow no good for any fast aerobatics. I got 4 and everyone i got was at different speeds. Then i noticed the sticky goopy looking muck they put in for grease. Took all servos apart and cleaned the goop out getting rid of lots of unwanted friction. Now they are a little faster. Remember though they are strong.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great servo's, use 4 of them in my scale 450. since im failry a new pilot, i use one on the tail as well, works great no complaints!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are great for foamy's. If the nylon gears strip( which you must have hit the ground hard) then replace ment gears are here.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a good servo. I bought 10 of them but 1 worked out. O do not believe that the speed is at 0,12 sec. It's similar to HTX900 but not the same. Also, is a good servo at this cheap price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
High quality servo! Great for shockflyers and small foam planes!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
well, I bought four of these babes, tg9 and four tg9e. The economical version worked pretty good, one of the four TG9 NEVER worked. I think it's part of the risk buying on the other side of the world. In the other hand they don't center very well but that's not problem. Please turnigy have a better control in your quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 12 of these servos Used 5 , some noisy some move different than others so I had to match them. I bent the airplane and took the gears out of three. I tried to get 12 sets of gears from HK and they don't even know if they sell them. Does anyone know of gears that I might buy? My servos have two flights on them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Slow servo. Depending on what you are using it for might not be fast enough. Good value but slow
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are not very good. teh HXT-900 is 100x better. these Turnigy TG9 do not center well at all and will make you plane fly poorly if used on surfaces - ailerons, elevator, rudder. they area also slow. I bought 4 and all 4 were the same. for the same price get the HXT900's.

One thing I like them for is retracts, as they are slower and you don't need a retract to center.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Schner Servo, klein und arbeitet, dazu noch preiswert. Selbst nach Absturz arbeitet er noch ohne Probleme.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.