New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy TrackStar 1 / 8ème Sensored moteur Brushless 2400KV

Turnigy TrackStar 1 / 8ème Sensored moteur Brushless 2400KV

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

54,53 €
Statut:
En stock.
SKU:
9192000096
WANT FREE SHIPPING? Click here to find out more!

Les Turnigy TrackStar Sensored Brushless Motors offrent des performances exceptionnelles à un prix incroyable!

Doté d'un moteur CNC de qualité peut, enroulements de cuivre de haute pureté à remontage manuel et puissants de néodyme frittés aimants, vous ne trouverez pas un moteur à meilleur prix de ce calibre nulle part ailleurs! Le capteur intégré assure le démarrage en douceur et accélération.

Les moteurs brushless TrackStar font une grande mise à niveau pour 1 / 8e camions courts de cours, monster trucks, buggies ou toute autre chose qui utilise 42 moteurs de taille.

Caractéristiques:
• Capteur-Basé pour un excellent couple et Maniabilité à basse vitesse
• Compatible avec tous les Sensored / Sensorless ESC
• Aluminium Motor CNC Can
• High Purity Copper Enroulements
• amovible / remplaçable Rotor
• Puissant frittés aimant néodyme
• Engineered de précision pour la conversion maximale d'énergie

* Note: Le câble du capteur inclus

Spécifications:
Taille: 4270
RPM / v: 2400 kv
Polonais: 4
Sensored: Oui (Standard 6 broches harnais)
Tension max: 15V (4S)
Max actuel: 160A
Max Watts: 2300W
Résistance: 0.0048ohm
Taille de l' arbre: 5mm
Can Diamètre: 42mm
Can Longueur: 70mm
Poids: 329g

  • UGS 9192000096
  • Brand TrackStar
  • Poids 445.0000
  • Longueur 110.00
  • Packaging Width 56.00
  • la taille 83.00
  • Kv ( rpm / v) 2400.00
  • Max Current (A) 160.00
  • Résistance ( mh ) 48.00
  • Max Tension (V) 15.00
  • (W ) 2300.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 70.00
  • Diamètre C ( mm ) 42.00
  • Longueur Can D ( mm ) 62.00
  • Longueur totale E ( mm ) 87.00
  • unboxing turnigy trackstar 1/8th sensored brushless motor 2400kv
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have this on an old T-maxx that I converted to electric. I have a dynamite .21 big block chassis with rpm arms, old school proline moab 40 series on Cheyenne wheels, savox 1270tg steering servo, summit trans, and a mmx esc. I run 6500mah 65c 4s lipo, and on an 85*f day, temp hits 120*f. 55mph at around 3/4 throttle is where the front tires come off of the ground

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this on an old T-maxx that I converted to electric. I have a dynamite .21 big block chassis with rpm arms, old school proline moab 40 series on Cheyenne wheels, savox 1270tg steering servo, summit trans, and a mmx esc. I run 6500mah 65c 4s lipo, and on an 85*f day, temp hits 120*f. 55mph at around 3/4 throttle is where the front tires come off of the ground

just received the Turnigy TrackStar 1/8th Sensored Brushless Motor 2400KV PRODUCT ID: 9192000096 .but i found that it had a problem while trying to run the motor with sensor cable provived , yes , i had tried other sensor cable as well but it still the same ,it running look like out of signal. i tryied to disconect the sensor cable and found it is working prefect.
in this case , what should i do ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

just received the Turnigy TrackStar 1/8th Sensored Brushless Motor 2400KV PRODUCT ID: 9192000096 .but i found that it had a problem while trying to run the motor with sensor cable provived , yes , i had tried other sensor cable as well but it still the same ,it running look like out of signal. i tryied to disconect the sensor cable and found it is working prefect.
in this case , what should i do ?

Tremendous power for my kyosho inferno brushless conversion. Big shaft, big bearings. Gets a bit warm on hotter days, I might have to gear a bit lower but it goes crazy fast on 4s with a 13t pinion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tremendous power for my kyosho inferno brushless conversion. Big shaft, big bearings. Gets a bit warm on hotter days, I might have to gear a bit lower but it goes crazy fast on 4s with a 13t pinion.

I've bought this motor with a Turnigy Trackstar 150A GenII 1/8th Scale Sensored Brushless Car ESC to put on my savage s-25. The savage weight is 8.5 kilos with 2*3400mha 2s 40c. It's fully modded with lst shock absorber etc.... And my savage is just crazy!!! Backflip are easy to do ^^ Great esc! I recommend

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought this motor with a Turnigy Trackstar 150A GenII 1/8th Scale Sensored Brushless Car ESC to put on my savage s-25. The savage weight is 8.5 kilos with 2*3400mha 2s 40c. It's fully modded with lst shock absorber etc.... And my savage is just crazy!!! Backflip are easy to do ^^ Great esc! I recommend

Great motor! Runs cool in my Erevo, and has as much or more power than the oem Castle motor while being much more precise being sensored.. I did have to gear down a little bit due to the higher kv to lighten the load on my fairly low c rating batteries. Geared stock however I could be going half to three quarters throttle on 4s and just a slight increase in throttle would still lift the frontend off the ground, and the control was smooth enough to actually hold the wheelie until I ran out of room to go straight haha! A product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor! Runs cool in my Erevo, and has as much or more power than the oem Castle motor while being much more precise being sensored.. I did have to gear down a little bit due to the higher kv to lighten the load on my fairly low c rating batteries. Geared stock however I could be going half to three quarters throttle on 4s and just a slight increase in throttle would still lift the frontend off the ground, and the control was smooth enough to actually hold the wheelie until I ran out of room to go straight haha! A product.

I have nothing bad to say about this motor very well built runs very strong over sized bearings runs cool anyone on the fence about this motor will love it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have nothing bad to say about this motor very well built runs very strong over sized bearings runs cool anyone on the fence about this motor will love it

I'm using this motor for last 2 months. Before using a cooling fan, the motor heated up to 90C and worked with no problems. Now, runing beside a 40x40 12V cooling fan, the motor heats up to max 65C. It delivers brutal power, the sensors work fine allso. I'm using it with a Gen2 150A Trackstar ESC. TOP BUY!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using this motor for last 2 months. Before using a cooling fan, the motor heated up to 90C and worked with no problems. Now, runing beside a 40x40 12V cooling fan, the motor heats up to max 65C. It delivers brutal power, the sensors work fine allso. I'm using it with a Gen2 150A Trackstar ESC. TOP BUY!

Awesome motor for the price, heaps of power on 4S, would recommend to anyone looking for a cheaper alternative to a castle or tekin motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome motor for the price, heaps of power on 4S, would recommend to anyone looking for a cheaper alternative to a castle or tekin motor.

Customer files
FULL SPECS TABLE Download [1419]
rotor size 2100kv Download [2335]
ball bearing Download [2543]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save