New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy TrackStar 13.5T Sensored moteur Brushless 2590KV

Turnigy TrackStar 13.5T Sensored moteur Brushless 2590KV

Discontinued Product

Please continue searching for a similar product.
SKU:
9052000021
WANT FREE SHIPPING? Click here to find out more!

Les Turnigy TrackStar Sensored Brushless Motors offrent des performances exceptionnelles à un prix incroyable!

Doté d'une qualité anodisé moteur CNC peut, enroulements de cuivre de haute pureté à remontage manuel et puissants de néodyme frittés aimants, vous ne trouverez pas un moteur à meilleur prix de ce calibre nulle part ailleurs! Ils disposent également d'temporisation réglable qui permet un réglage fin de la performance de votre parcours tandis que le capteur assure le démarrage en douceur et accélération.

Les moteurs brushless TrackStar font une grande mise à niveau pour 1 / 10ème camions courts de cours, poussettes, voitures en tournée ou toute autre chose qui utilise 540 moteurs de taille.

Caractéristiques:
• Capteur-Basé pour un excellent couple et Maniabilité à basse vitesse
• Timing réglable
• Compatible avec tous les Sensored / Sensorless ESC
• Aluminium Moteur usiné CNC T6 Can
• High Purity Copper Enroulements
• haute puissance Solder Tabs
• amovible / remplaçable Rotor
• Puissant frittés aimant néodyme
• Engineered de précision pour la conversion maximale d'énergie


* Note: Le câble du capteur inclus

Spécifications:
Can Taille: 540
Active: 13.5
RPM / v 2590kv
Polonais: 2
Sensored: Oui (Standard 6 broches harnais)
Tension Max: 11.1 ~ 14.8V (3 ~ 4S)
Max actuel: 21A
Max Watts: 310W
Résistance: 0.0363ohm
Non Courant de charge: 3A
Taille de l' arbre: 3,175
Can Diamètre: 36mm
Can Longueur: 51.5mm
Poids: 156g

  • UGS 9052000021
  • Brand TrackStar
  • Poids 233.0000
  • Longueur 138.00
  • Packaging Width 50.00
  • la taille 105.00
  • Kv ( rpm / v) 2590.00
  • Max Current (A) 21.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 15.00
  • (W ) 310.00
  • Arbre A ( mm ) 3.18
  • Longueur B ( mm ) 52.00
  • Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 38.00
  • Longueur totale E ( mm ) 67.00
  • Turnigy Trackstar Motor
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Einfach ein genialer Motor fr das Geld der von 2-4s gefahren werden kann
Sehr feinfhlig mit dem trakstar 120esc Turbo
Habe dieses Setup in einem 1/10 xray x10/2015 verbaut

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Einfach ein genialer Motor fr das Geld der von 2-4s gefahren werden kann
Sehr feinfhlig mit dem trakstar 120esc Turbo
Habe dieses Setup in einem 1/10 xray x10/2015 verbaut

Super Motor, luft sehr leise! Top

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super Motor, luft sehr leise! Top

This 13.5T is wound with 2 wires instead of 4 like the usual motors under ROAR rules. It lacks power through its rev range. I would recommend the other Trackstar motor as I have both and prefers it. Its also properly wound with 4 strands instead of 2.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This 13.5T is wound with 2 wires instead of 4 like the usual motors under ROAR rules. It lacks power through its rev range. I would recommend the other Trackstar motor as I have both and prefers it. Its also properly wound with 4 strands instead of 2.

really nice motor , very good torque and smooth,runs nice and cool , actual build quality is superb, no gaps around the wiring point or harness connector to allow dirt in, timing adjustment at the end bell is nice and easy with just two screws and easy to grip recesses with good clear timing markings , leave it set to 30 degrees if you are running with reverse enabled .
for the price this is a great motor , not the fastest 13.5 i have had but for street running or racing on a very tight track with a bit of timing advance on the esc its brilliant.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

really nice motor , very good torque and smooth,runs nice and cool , actual build quality is superb, no gaps around the wiring point or harness connector to allow dirt in, timing adjustment at the end bell is nice and easy with just two screws and easy to grip recesses with good clear timing markings , leave it set to 30 degrees if you are running with reverse enabled .
for the price this is a great motor , not the fastest 13.5 i have had but for street running or racing on a very tight track with a bit of timing advance on the esc its brilliant.

Ive just put the track star 13.5T motor in a mardave V12. I highly recommed this motor for racing its very smooth with the and has great pick up on the staights Im using a core 45 speed control with a program card the lipo im using are nano 5000 3.7V and zippy 6000 3.7V. I going to order a second one as there that good. Happy Racing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive just put the track star 13.5T motor in a mardave V12. I highly recommed this motor for racing its very smooth with the and has great pick up on the staights Im using a core 45 speed control with a program card the lipo im using are nano 5000 3.7V and zippy 6000 3.7V. I going to order a second one as there that good. Happy Racing!

An awesome motor! Extremely silent and smooth; even when used with a sensorless ESC, it gives an excellent performance...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An awesome motor! Extremely silent and smooth; even when used with a sensorless ESC, it gives an excellent performance...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save