Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy TrackStar étanche 1/10 Brushless System Power 4000KV / 80A

Generating Links

Turnigy TrackStar étanche 1/10 Brushless System Power 4000KV / 80A

Prix:

Now save économisez 0,00 € 0,00 €

68,01 €
Statut:
Epuisé!
SKU:
9192000061
Livraison gratuite? Cliquez ici pour apprendre plus!

Un système sans balais extrêmement puissant pour tout 1/10 ou 1/12 camion échelle, voiture ou buggy. La série étanche Turnigy TrackStar offre les meilleures performances, une excellente valeur et composants étanches dans un package facile à utiliser combo. Avec ce système, le moteur et l'ESC sont adaptés pour une meilleure performance qui vous permet d'économiser les tracas de choisir des composants séparés vous. Il suffit de souder sur vos connecteurs préférés, installer un pignon et votre prêt à fonctionner!

Être imperméable à l'eau, ce système vous permet d'exécuter votre modèle dans presque toutes les conditions météorologiques, y compris la pluie et la neige! Cela ouvre un tout nouveau monde de possibilités pour votre favori R / C camion, voiture ou buggy.

Caractéristiques:
ESC
• réponse améliorée des gaz, précise l'accélérateur linéaire, une excellente accélération et des freins puissants
• étanche pour temps humide en cours d'exécution
• Programmable avec le Turnigy TrackStar Turbo et la boîte de programmation étanche (vendu séparément)
• détecte automatiquement le nombre de cellules dans la batterie.
• Fonctions multiples de protection: protection basse tension de coupure, surchauffe, protection contre l'accélérateur de perte de signal et le moteur bloqué protection.
Moteur
• étanche pour temps humide en cours d'exécution
• anodisé haute qualité finition CNC
• enroulements de cuivre de haute pureté
• aimant néodyme fritté puissant
• Fonctionnement à haut rendement

ESC Spécifications:
Courant continu: 80A
Burst actuelle: 95A
Résistance: 0.0009ohm
Batterie: 2 cellules Lipo (5-6 cellules NI-xx)
Sortie BEC: 6V / 1A
Type de moteur: moteurs brushless sans capteur
Mode de fonctionnement: Envoyer uniquement ou transmettre avec marche arrière (mode programmable par l'utilisateur)
Dimension: 43 x 38 x 20mm
Poids: 88g

Caractéristiques Moteur:
Modèle: 3650 Sensorless
Kv: 4000
Nombre de pôles: 2
Cont actuel: 45A
Crête: 55A
Max Power (15sec): 370W
Remontage: 16T
Résistance: 0.0125ohm
Poids: 180g
Diamètre: 36mm
Longueur: 53mm
Diamètre de l' arbre: 3,175

Comprend:
80A Brushless Sensorless
3650 16T (4000Kv) moteur Brushless

  • Kv ( rpm / v) 4000.00
  • Max Current (A) 55.00
  • Résistance ( mh ) 12.50
  • Max Tension (V) 8.00
  • (W ) 370.00
  • Arbre A ( mm ) 3.17
  • Longueur B ( mm ) 54.00
  • Can Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 50.00
  • Longueur totale E ( mm ) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Jk | Acheteur vérifié

  • Overall
  • Quality
  • Value

Still not to sure...

Feb 05, 2022

So I really really want to love this, that being said.. the ESC is incredibly difficult to configure to your remote. Had to use flysky 3 channel reciever and use input 2(input 1 is for the steering servo) to get it to finally read, then for my remote nothing worked like everyone said it should, only a solid orange light, pressing the little set button did nothing.. but I finally figured out you just have to press the trigger and it flashed indicating it set reverse, the neutral, and forward. It worked. Then got all that working, the motor and esc all setup out of the vehicle, tested it, seemed good. Put it all into my deerc 9200 platform, a 1/12 scale really, and its cogging really bad at start. Double checked i had no weird sudden binds in the drive train. Took it all out, tested it out again and checked for binding in the drive train. Put it all back, and still cogging real bad at start. Once it gets going a little this thing FLIES! Very awesome speed demon 4x4, honestly almost to fast. I am going to try and reset my remote to the esc and see if that gives me any solutions..

Paul | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very good run very smoth

Feb 03, 2022

They run very smooth and quite

ALEX | Acheteur vérifié

  • Overall
  • Quality
  • Value

Happy customer

Jun 17, 2020

I run this on my Tamiya Blitzer beetle. I've never programmed it and its set up nice from the box. I use a 2s lipo battery and it really flies. Maybe too fast for the chassis but so much fun.

Lyndsay | Acheteur vérifié

  • Overall
  • Quality
  • Value

Only for the experience

Apr 30, 2020

Had to file down plug to fit programming box which is needed to get the motor to run nice. you need battery plugs which are not supplied.

Baschdelhorst | Acheteur vérifié

  • Overall
  • Quality
  • Value

Super Geil!

Dec 30, 2019

Tolle Kombo, eingebaut in XRay T4 2018. Perfekter Sitz, einbauen, einschalten, funktioniert ! Sehr zu empfehlen

Ivo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Bad quality! Do not buy this!

Oct 16, 2019

It's almost impossible to calibrate the esc. We are 4 people who bought this and all of us have problems with esc.

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Trash trash trash

Sep 25, 2019

Complete trash was sent 2 systems and neither esc worked.... Now I'm stuck paying to ship this crap and back and wasted time just to get store credit to buy some more junk. Make it make sense

Darren | Acheteur vérifié

  • Overall
  • Quality
  • Value

Excellent Bang For the Buck

Jul 07, 2019

Great combo! Replaced the stock brushed system in my Arrma Senton with this. Very simple install, pretty much plug and play. Only issue I have, and the reason for only 4 crowns on quality is: 1) zero documentation comes with this. I had to spend time on you tube and google to figure out that 2) without the programming card (which ALSO does not have instructions) you’re pretty limited on the stock performance as programmed.
I tweaked the programming with the programming card and this combo just took right off. I would like to see a description of each parameter in the programming as mine didn’t have the same options as any I watched on you tube.
Great Product!

Andy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Works great

Jun 04, 2019

Put this getup in my son's 1/10 AMP DB 2WD Desert Buggy Brushed RTR, Black/Yellow (ECX03029T1). The thing tears it up now, but am a little worried about the driveshaft universal joints. They have a history of failing in this car and I may have just decreased the projected lifespan.

stewart | Acheteur vérifié

  • Overall
  • Quality
  • Value

Loads of power, Well worth getting

Jun 02, 2018

Got this combo in my Tamiya M07 as we race all year round out side,turned the speedo down by 40% otherwise it burns the tyres up. Been running it for 10 months or more and cant fault it great value for money. I have the other combos running in my 4wd Vandal Buggy 2cell (5200 combo) and Trooper Short Course truck 3cell (3250) and all are great fun waterproof fast and reliable.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Fichiers clients
No File Name Download [3675]
Throttel_Range Download [1]
think this is it. Download [1262]
ESC Calibration v2.0 Download [169]
ESC Calibration Download [26]
No File Name Download [3435]
Manual ESC Download [33]
Procédure de calibrage et Notice - ESC Tracskar 80A Download [13]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags

Accessoires