Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy TrackStar étanche 1/10 Brushless System Power 3000KV / 80A

Generating Links

Turnigy TrackStar étanche 1/10 Brushless System Power 3000KV / 80A

Prix:

Now save économisez 0,00 € 0,00 €

67,97 €
Expédié de:
  • USA
  • Global
Déjà acheté
Heure d'arrivée estimée: Aucune Heure D'arrivée Estimée [ ? ]
Statut:
Epuisé!
SKU:
9192000060
Livraison gratuite? Cliquez ici pour apprendre plus!

Un système sans balais extrêmement puissant pour tout 1/10 ou 1/12 camion échelle, voiture ou buggy. La série étanche Turnigy TrackStar offre les meilleures performances, une excellente valeur et composants étanches dans un package facile à utiliser combo. Avec ce système, le moteur et l'ESC sont adaptés pour une meilleure performance qui vous permet d'économiser les tracas de choisir des composants séparés vous. Il suffit de souder sur vos connecteurs préférés, installer un pignon et votre prêt à fonctionner!

Être imperméable à l'eau, ce système vous permet d'exécuter votre modèle dans presque toutes les conditions météorologiques, y compris la pluie et la neige! Cela ouvre un tout nouveau monde de possibilités pour votre favori R / C camion, voiture ou buggy.

Caractéristiques:
ESC

• réponse améliorée des gaz, précise l'accélérateur linéaire, une excellente accélération et des freins puissants
• étanche pour temps humide en cours d'exécution
• Programmable avec la carte de programmation Turnigy TrackStar pour faire des ajustements. (vendu séparément)
• détecte automatiquement le nombre de cellules dans la batterie.
• Fonctions multiples de protection: protection basse tension de coupure, surchauffe, protection contre l'accélérateur de perte de signal et le moteur bloqué protection.
Moteur
• étanche pour temps humide en cours d'exécution
• anodisé haute qualité finition CNC
• enroulements de cuivre de haute pureté
• aimant néodyme fritté puissant
• Fonctionnement à haut rendement

ESC Spécifications:
Courant continu: 80A
Burst actuelle: 95A
Résistance: 0.0009ohm
Batterie: 2 cellules Lipo (5-6 cellules NI-xx)
Sortie BEC: 6V / 1A
Type de moteur: moteurs brushless sans capteur
Mode de fonctionnement: Envoyer uniquement ou transmettre avec marche arrière (mode programmable par l'utilisateur)
Dimension: 43 x 38 x 20mm
Poids: 88g

Caractéristiques Moteur:
Modèle: 3650 Sensorless
Kv: 3000
Nombre de pôles: 2
Cont actuel: 34A
Crête: 46A
Max Power (15sec): 260W
Remontage: 21T
Résistance: 0.0196ohm
Poids: 180g
Diamètre: 36mm
Longueur: 53mm
Diamètre de l' arbre: 3,175

Comprend:
80A Brushless Sensorless
3650 21T (3000Kv) moteur Brushless

  • Kv ( rpm / v) 3000.00
  • Max Current (A) 46.00
  • Résistance ( mh ) 19.60
  • Max Tension (V) 8.00
  • (W ) 260.00
  • Arbre A ( mm ) 3.17
  • Longueur B ( mm ) 54.00
  • Can Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 50.00
  • Longueur totale E ( mm ) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

hippy | Acheteur vérifié

  • Overall
  • Quality
  • Value

good product

Oct 24, 2022

very good product. Fit for my project 1/10 buggy

Paul | Acheteur vérifié

  • Overall
  • Quality
  • Value

Bad motor

Sep 10, 2021

Seen the reviews on this combo Motor and Esc kit. So I purchased one for my 1/10 volcano from red cat racing! Did the motor swap and ESC swap put it all back together ran it for probably 20 minutes and the motor got super hot that it ended up seizing up and end up with a $80 paper weight! I would not recommend!

Charlie6969 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Does the job that I wanted it to do.

May 19, 2021

Does the job that I wanted it to do.

Solid Kit and Amazing Support | Acheteur vérifié

  • Overall
  • Quality
  • Value

Solid Kit and Amazing Support

Sep 10, 2019

I purchased with kit to use in my OpenRC Truggy that I'm building. The first kit a received had a faulty ESC and had to be warrantied. The support team was very fast at getting my ESC replaced and was able to get everything up and running. Was very pleased with the after sale support for this kit.

Mirko G. | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good budget combo

Sep 22, 2017

Bought to upgrade a Maverick Strada EVO XT, together with Turnigy 5200mAh 2S 30C, my car became crazy! The speed is increased by x2, acceleration is insane compared to the stock car. The cogging is very obvious at "normal", setting the ESC to "low", the cogging is acceptable but present (not important for me because the car is always at high regimes and cogging disappears). Temperature are very good, the battery is just little bit hot. Sometimes the fan on ESC not start when i turn on the system, i need to touch it to make it go, with fan OFF, i lost control of my car 2 times, maybe because ESC go in protection mode ( i don't know because the car was far from me).

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 09, 2016

I dropped this into an old Tamiya model, an Opel Calibra Cliff.



Everything functioned nicely out of the box and it has ample power to handle the old models belt drive with out getting to hot with stock gearing.



The only thing I've noticed is this unit cogs on maybe one in 15 starts but quickly remidies it's self as power ramps up. It appears that the punch setting is set really really low out of the box. I haven't gotten to investigate because the programing card was out of stock when I ordered it.



Overall I'm happy with the motor/ESC combo and would buy it again for another model should the need arise.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 22, 2016

Super volba pre moj Stampede

Jason | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 07, 2016

Upset even with the programmer you can't get rid of the reverse lockout, Some times it will reverse sometimes it wont.

Other than the spotty revers issues it seems solid.

You need the (Turnigy TrackStar Turbo and Waterproof ESC Programming Box) to program THIS ESC

(Traxxas Rustler running 19/86 gears 2s)

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 22, 2016

Very easy to set up and worked great while it lasted. Burnt up very quickly, hobbyking was great and sent a full refund, was probably a fluke.

Bank&Wank | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2015

4 stars so far. Just installed in daughters t4 and impressed so far. Geared at 19/87 and running nice and cool. Tons of grunt on the bottom and reasonable top speed. Two pole seems to cog a bit on the very bottom but unnoticed when driving. Out performs 17t brushless with half the heat and twice the battery life. The tuning with card is some what limited with low med and high settings, but adjustable enough. If it holds up to the test of time, I would give it 5 star for the price

  1. 1
  2. 2
  3. 3
Fichiers clients
No File Name Download [1]
TrackStar Calibration V2.0 Download [169]
ESC Calibration Download [26]
Programming chart Download [2503]
Procédure de calibrage et Notice - ESC Tracskar 80A Download [13]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags

Accessoires