New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy TrackStar étanche 1/10 Brushless System Power 4000KV / 80A

Turnigy TrackStar étanche 1/10 Brushless System Power 4000KV / 80A

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

59,10 €
Statut:
En stock.
SKU:
9192000061
WANT FREE SHIPPING? Click here to find out more!

Un système sans balais extrêmement puissant pour tout 1/10 ou 1/12 camion échelle, voiture ou buggy. La série étanche Turnigy TrackStar offre les meilleures performances, une excellente valeur et composants étanches dans un package facile à utiliser combo. Avec ce système, le moteur et l'ESC sont adaptés pour une meilleure performance qui vous permet d'économiser les tracas de choisir des composants séparés vous. Il suffit de souder sur vos connecteurs préférés, installer un pignon et votre prêt à fonctionner!

Être imperméable à l'eau, ce système vous permet d'exécuter votre modèle dans presque toutes les conditions météorologiques, y compris la pluie et la neige! Cela ouvre un tout nouveau monde de possibilités pour votre favori R / C camion, voiture ou buggy.

Caractéristiques:
ESC
• réponse améliorée des gaz, précise l'accélérateur linéaire, une excellente accélération et des freins puissants
• étanche pour temps humide en cours d'exécution
• Programmable avec le Turnigy TrackStar Turbo et la boîte de programmation étanche (vendu séparément)
• détecte automatiquement le nombre de cellules dans la batterie.
• Fonctions multiples de protection: protection basse tension de coupure, surchauffe, protection contre l'accélérateur de perte de signal et le moteur bloqué protection.
Moteur
• étanche pour temps humide en cours d'exécution
• anodisé haute qualité finition CNC
• enroulements de cuivre de haute pureté
• aimant néodyme fritté puissant
• Fonctionnement à haut rendement

ESC Spécifications:
Courant continu: 80A
Burst actuelle: 95A
Résistance: 0.0009ohm
Batterie: 2 cellules Lipo (5-6 cellules NI-xx)
Sortie BEC: 6V / 1A
Type de moteur: moteurs brushless sans capteur
Mode de fonctionnement: Envoyer uniquement ou transmettre avec marche arrière (mode programmable par l'utilisateur)
Dimension: 43 x 38 x 20mm
Poids: 88g

Caractéristiques Moteur:
Modèle: 3650 Sensorless
Kv: 4000
Nombre de pôles: 2
Cont actuel: 45A
Crête: 55A
Max Power (15sec): 370W
Remontage: 16T
Résistance: 0.0125ohm
Poids: 180g
Diamètre: 36mm
Longueur: 53mm
Diamètre de l' arbre: 3,175

Comprend:
80A Brushless Sensorless
3650 16T (4000Kv) moteur Brushless

  • UGS 9192000061
  • Brand TrackStar
  • Poids 389.0000
  • Longueur 135.00
  • Packaging Width 45.00
  • la taille 100.00
  • Kv ( rpm / v) 4000.00
  • Max Current (A) 55.00
  • Résistance ( mh ) 12.50
  • Max Tension (V) 8.00
  • (W ) 370.00
  • Arbre A ( mm ) 3.17
  • Longueur B ( mm ) 54.00
  • Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 50.00
  • Longueur totale E ( mm ) 67.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

sterke motor en mooie prestaties die hij geeft !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

sterke motor en mooie prestaties die hij geeft !

Really good combo, use this on TD-10. Works great

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good combo, use this on TD-10. Works great

Great power and runtime in my ECX Ruckus 1/10 2wd. Have been blasting through puddles and huge snow jumps. It has been a blast!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power and runtime in my ECX Ruckus 1/10 2wd. Have been blasting through puddles and huge snow jumps. It has been a blast!

decent footprint for esc and motor has very good power. I bought two of these for my son's tomahawk and kyosho beetle. good build qualty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

decent footprint for esc and motor has very good power. I bought two of these for my son's tomahawk and kyosho beetle. good build qualty

Put this in my Team Durango stadium truck andit realt delivers!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put this in my Team Durango stadium truck andit realt delivers!

This isn't bad really just not easy to set up and if you're using forward and reverse mode it will occasional just stop for no reason, then after a pause of around 3 seconds will go again. When run on forward only this doesn't happen but it has to be set on reverse to be able to run forward only.
It has a little too much power, I actually thought 4000KV would be quite slow but it's as quick as my 6.5 I have so I've run the timing on low and power on 80pcnt to make it drivavble

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This isn't bad really just not easy to set up and if you're using forward and reverse mode it will occasional just stop for no reason, then after a pause of around 3 seconds will go again. When run on forward only this doesn't happen but it has to be set on reverse to be able to run forward only.
It has a little too much power, I actually thought 4000KV would be quite slow but it's as quick as my 6.5 I have so I've run the timing on low and power on 80pcnt to make it drivavble

Second esc I've bought from Hobbyking, the first been just and esc an 80a one and had nothing but trouble so i thought I'd try the Turnigy brand this time expecting it to be better, I suppose it is, a little bit but not a lot, when its running it runs OK but every so often it wants a break and decides to just stop, which is very interesting when you have another truck right behind you and it runs into you at speed. Luckily it doesn't happen often, but it shouldn't happen at all. It does it before the motor has got warm so it's not a heat issues, I guess it's not suited to stadium trucks. I doubt very much I'll buy esc/motors from hobbykng ever again they really shouldn't get away with selling the garbage they do.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Second esc I've bought from Hobbyking, the first been just and esc an 80a one and had nothing but trouble so i thought I'd try the Turnigy brand this time expecting it to be better, I suppose it is, a little bit but not a lot, when its running it runs OK but every so often it wants a break and decides to just stop, which is very interesting when you have another truck right behind you and it runs into you at speed. Luckily it doesn't happen often, but it shouldn't happen at all. It does it before the motor has got warm so it's not a heat issues, I guess it's not suited to stadium trucks. I doubt very much I'll buy esc/motors from hobbykng ever again they really shouldn't get away with selling the garbage they do.

I have this in my 2wd buggy its the perfect power needed for 2wd without just spinning doughnuts. that being said I can still do them. all in all a dam good combo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this in my 2wd buggy its the perfect power needed for 2wd without just spinning doughnuts. that being said I can still do them. all in all a dam good combo.

Bought this for my old HPI E-Firestorm. The car is now a bashing monster!

Would recommend this to everyone who wants a nice combo for their 1/10 basher.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for my old HPI E-Firestorm. The car is now a bashing monster!

Would recommend this to everyone who wants a nice combo for their 1/10 basher.

Good power and works well n my T4.1 for racing.I am having problems calibrating it but seems to work ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good power and works well n my T4.1 for racing.I am having problems calibrating it but seems to work ok.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
No File Name Download [3675]
Throttel_Range Download [1]
think this is it. Download [1262]
ESC Calibration v2.0 Download [169]
ESC Calibration Download [26]
No File Name Download [3435]
Manual ESC Download [33]
Procédure de calibrage et Notice - ESC Tracskar 80A Download [13]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save