The Turnigy TWIN X14 is an exclusive HobbyKing offering, featuring a unique colour that sets it apart in the market. This robust radio system comes preloaded with HobbyKing planes, ensuring a seamless experience straight out of the box. It also boasts the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.

Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals. These attributes, along with the exterior antenna, provide higher reliability, less latency, and faster data rates. In addition to the TW mode, the TWIN X14 also supports ACCST D16 and ACCESS modes, meaning users can benefit from a wide range of compatible receiver options.

The compact, ergonomic design ensures that all the buttons, switches, and sliders are very easily accessible. The TWIN X14 also offers 4 customizable buttons, these are sensibly placed in the center of the transmitter for easy access. An example of using these buttons is when flying an RC glider you can configure these buttons as additional trim functions. These buttons become invaluable for making adjustments when flying and allow pilots to adjust the angle of the flaps and control surfaces according to the real-time air environment. The Turnigy TWIN X14 is also mode changeable from Mode 2 to Mode 1 for example. This does require the rear cover being removed and adjustments made to the ratchets, etc on the stick units, but it is very straightforward to do. It is then a simple case of going into the settings and selecting the mode you require.

With the TWIN X14 there is no need for users to fret over the amount of storage available. It boasts a built-in 128MB flash storage facility that provides ample space for your file storage requirements. Its practicality extends to a battery bay that can accommodate a 2600mAh Lithium Battery (not supplied). This is easily replaceable/exchanged, and the Tx features a Type-C port for recharging and data transfer. Further enhancing its user-friendly design, the TWIN X14 introduces an attachable, and foldable structure on the rear case. This design allows for the easy installation of an additional stand holder which is available separately.

Features:
• Hobbyking planes come preloaded on the radio
• Exclusive Model to Hobbyking
• Long range built-in dual 2.4GHz band TW-ISRM internal RF module
• Ergonomic, compact, and lightweight design, with comfortable rounded hand grips
• Easy-to-reach switches and sliders, 4 quick-mode custom buttons on the front, 2 momentary buttons on the rear
• High resolution 640x360 color display screen
• High precision hall sensor gimbals, mode changeable
• Haptic vibration alerts and speech outputs
• Lite-type external module bay

Specs:
Type: Turnigy TWIN X14 ACCESS Transmitter
Frequency: 2.4GHz
Operating System: ETHOS
Compatibility: ACCST D16/ACCESS/TW modes
No of Channels: Up to 24
Gimbals: High-precision hall sensor
Built-in Flash Storage: 128MB
Internal Module: TW-ISRM
External Module: Lite-type
Display Screen: 2.95" color with 640x360 resolution
Data & Charging Interface: USB Type-C
Alerts: Haptic vibration and speech alerts
USB Adaptor Voltage/Current: 5V+0.2V@2A
Operating Voltage: 6.5~8.4V (2S Li-battery)
Operating Current: 330mA@7.4V
Range: Up to tens of kilometers depending on the RF power setting
Dimensions: 192x193x72mm
Weight: 610g (excluding battery)
Color: Orange

Included:
1 x Turnigy TWIN X14 ACCESS 2.4GHz Transmitter (Orange)
1 x Neckstrap

Required:
1 x 2S Lithium battery up to 2600mAh capacity

Please note: A copy of the user manual is available under the "Manuals/Files" tab above.