Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy ™ 1251TG Coreless Low Profile DS / 8 kg MG Servo / 0,9 sec / 48g

Generating Links

Turnigy ™ 1251TG Coreless Low Profile DS / 8 kg MG Servo / 0,9 sec / 48g

Prix:

Now save économisez 0,00 € 0,00 €

27,08 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TGY-1251TG
Livraison gratuite? Cliquez ici pour apprendre plus!

  Turnigy 1251TG Coreless numérique Low Profile Metal Gear Servo 48g / 8 kg / 0,9 sec

Modèle: GTY-1251TG
Tension de fonctionnement: 4.8V / 6.0V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.10sec.60º / 0.09sec.60º
Stall Couple: 7.0kg.cm /8kg.cm
Taille: 40.5X20.2X26.3mm
Poids: 48g
Bande morte: ≤2uSec
Moteur: Coreless type
Roulement à billes: 2BB
Boîte de vitesses: Titane
Fil de connecteur: 300mm
Branchez: JR type
Température de fonctionnement: -20C + 60c

  • Servo Couple ( kg ) ( min . 0,01 kg ) 8.00
  • Servo Vitesse ( Sec / 60deg ) 0.09
  • Servo A (mm) 30.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 27.00
  • Servo D (mm) 20.00
  • Servo E ( mm ) 54.00
  • Servo F ( mm) 16.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2015

Wow the gears sound terrible, like they are skipping or stripped. So I took the servo apart and inspected the gears. Everything looked ok, but one gear was rubbing on the case. After a little shave with an exacto knife it was a little better. But the skipping/stripping noise was still there. I'll try it in the car and hope for the best.

Eugenio | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 15, 2013

Al recibirlo lo monte en mi 1/10 touring y lo he tenido que quitar, no funciona bien. no lo recomiendo para competicion solo para juguetes.

rcroadtrain | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2013

When it arrived, I was really impressed with the packaging, but.. when I fitted it into a MST drifter, I was shocked at how cr4p it is. I'd give it a lower rating if I could. For $26, I expected better.
Good for retracts, and that's about it; definitely not good for the steering on my drift car which is what I bought it for as it wont return to centre cleanly.. far too much play in the internal gears in this servo.
MG995's perform better than this servo.. at a fifth of the price (off ebay..)

Sorry, but this one missed the mark.

Mario | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 19, 2013

I'm ruuning with this servo for 3 weeks now in a Dex210 ( no servo-saver ). Good speed, good torque. Build quality is OK. Had to tight the bottom screws and the brand sticker doesn't even fits where it belongs ( LOL ). So far I'm very happy with it. I've been comparing it to some other brand's more then twice the price and can't see any difference in performance !

Will | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 07, 2013

Ordered 3 and all were faulty. Glitching and wouldn't hold a position properly. Completely unusable.

Adrian | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2012

Rubbish product, sent mine back as the speed was nowhere near rating. My old basic analong hitec servo is much faster! A rock crusher also operates smoother than this servo.

Despite this Hobbyking claimed it was not faulty!? How can this be?

ODmix | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2012

Assembly of the servo case was in poor condition.

Lars | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 13, 2012

While this servo is small, it is still a bit on the heavy side, but also cheap, strong, fast and a perfect match for racing my 1/10 touring car (Sakura Zero S) at the local track.

Duncan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 26, 2012

Brilliant! I am using this servo for steering on my 1/10th touring car. Compact , fast, accurate, powerful and comparitively small power consumption. Cannot believe the quality for the price.

Trevor | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2012

These servos have a very fast response. I have used 2 of these as retract servos. They are slim height so can be used in place of a normal retract servo. I used a Turnigy 3 channel speed regulator to slow down the speed. This makes for nice scale deployment of the gear.
They are a bit noisey even when no load is on them. Lots of torque and being proportional the end points can be set to get perfect travel on the gear control rods.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!