New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy ™ GTY-1267HV Titanium BB / DS / MG Servo 14 kg / 0.10sec / 57g

Turnigy ™ GTY-1267HV Titanium BB / DS / MG Servo 14 kg / 0.10sec / 57g

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

29,76 €
Statut:
En stock.
Poids
175 g
SKU:
TGY-1267HV
WANT FREE SHIPPING? Click here to find out more!

  Turnigy 1267HV numérique Titanium Vitesse Servo 57g / 14 kg / .10sec

Modèle: GTY-1267HV
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.12sec.60º / 0.10sec.60º
Stall Couple: 12kg.cm /14kg.cm
Taille: 40.3X20.2X37.2mm
Poids: 57g
Bande morte: ≤2uSec
Moteur: Coreless type
Roulement à billes: 2BB
Boîte de vitesses: Titane
Fil de connecteur: 300mm
Branchez: JR type
Température de fonctionnement: -20C + 60c

  • UGS TGY-1267HV
  • Brand Turnigy
  • Poids (g) 175.00
  • Longueur 114.00
  • Largeur 31.00
  • la taille 75.00
  • Couple ( kg ) ( min . 0,01 kg ) 14.00
  • Vitesse ( Sec / 60deg ) 0.10
  • A (mm) 44.00
  • B ( mm ) 40.00
  • C ( mm ) 41.00
  • D (mm) 20.00
  • E ( mm ) 53.00
  • F ( mm) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

all work great have at 30

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

all work great have at 30

Awesome servo I bought 8 to put in my esm fw 190 great quality...I swear they are savox 1267 tg's all worked and cycled beautifully. Great product. Will buy again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome servo I bought 8 to put in my esm fw 190 great quality...I swear they are savox 1267 tg's all worked and cycled beautifully. Great product. Will buy again.

It's not made in China.

MADE IN TAIWAN.

You must buy.

I'm pleased with it.

On my 1:8 buggy, it works perfectly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's not made in China.

MADE IN TAIWAN.

You must buy.

I'm pleased with it.

On my 1:8 buggy, it works perfectly.

I fly it in my Gaui X7 on cyclic, with stock motor HK 4035-500 v3 on vbar 5.3 pro.

Works since 30 flights perfect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fly it in my Gaui X7 on cyclic, with stock motor HK 4035-500 v3 on vbar 5.3 pro.

Works since 30 flights perfect.

Hi guys i have purchased these and running them in a trex 700e with a scorpion 5035 500kv/ice120 beastx 2300 rpm head speed running 2slipo unregulated they seem to be performing well in quite a hardcore 3d setup ,(and heavy heli)but my only concern is that they are running extremely hot at 40-50c degrees after 4 min .but still a lot better than my previous align ds610 which i had one fail under load.i would also recommend using rubber grommets as the plastic mounts are not too flexible and brittle-done round 10 flights so far but will now run servo frequency down to 120hz rather than the 200hz i have been running(not sure what they are meant to be as not stipulated on servo box.or anywhere

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi guys i have purchased these and running them in a trex 700e with a scorpion 5035 500kv/ice120 beastx 2300 rpm head speed running 2slipo unregulated they seem to be performing well in quite a hardcore 3d setup ,(and heavy heli)but my only concern is that they are running extremely hot at 40-50c degrees after 4 min .but still a lot better than my previous align ds610 which i had one fail under load.i would also recommend using rubber grommets as the plastic mounts are not too flexible and brittle-done round 10 flights so far but will now run servo frequency down to 120hz rather than the 200hz i have been running(not sure what they are meant to be as not stipulated on servo box.or anywhere

These servos work well and are a very good value. They are a step below the more expensive JR Corlee digitals but not by much. The packaging is amazing too. Mike Mueller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These servos work well and are a very good value. They are a step below the more expensive JR Corlee digitals but not by much. The packaging is amazing too. Mike Mueller

Cheap and very good quality product.



I`m use in my trex700e DFC version, Swash Servos.



This servo is very quick and powerful.



Power is from 7.4v bec(Gryphon vega using main batteries)



Better then aling ds610 servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap and very good quality product.



I`m use in my trex700e DFC version, Swash Servos.



This servo is very quick and powerful.



Power is from 7.4v bec(Gryphon vega using main batteries)



Better then aling ds610 servo.

great servos ive bought around 8 of this brand including this 1212 > for 1/10th touring cars 1/8th scale on road steering servos short course trucks brilliant on all of them better than my savox which are upto 3 x the price just buying another now

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great servos ive bought around 8 of this brand including this 1212 > for 1/10th touring cars 1/8th scale on road steering servos short course trucks brilliant on all of them better than my savox which are upto 3 x the price just buying another now

...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!