Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy ™ GTY-9150MG DS / MG Servo 15,8 kg / 0.17sec / 60g

Generating Links

Turnigy ™ GTY-9150MG DS / MG Servo 15,8 kg / 0.17sec / 60g

Prix:

Now save économisez 0,00 € 0,00 €

42,14 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TGY-9150MG
Livraison gratuite? Cliquez ici pour apprendre plus!
Modèle: GTY-9150MG
Voltage: 4.5v ~ 6v
Vitesse: 0.17sec
Couple: 15,8 kg / cm
Roulements: 2BB
Gears: Métal
Poids: 61g
Taille: 40.7x20x42.2mm
  • Servo Couple ( kg ) ( min . 0,01 kg ) 15.80
  • Servo Vitesse ( Sec / 60deg ) 0.17
  • Servo A (mm) 47.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 42.00
  • Servo D (mm) 20.00
  • Servo E ( mm ) 55.00
  • Servo F ( mm) 32.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

JeffBr | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 07, 2016

Overall I am quite satisfied with all products I have purchased from HK over the past 5-6-7? years. But I am absolutely not happy with these servo's. For some reason I can still not figure out why I have burnt approx. 4-5 of these over the past 2 years while building my glider. They are built in the wings and elevator of my large glider L-213A from Valenta (the plane has not been flown yet, due to these issues). In each wing 4 servo's are built in. 2 per each aileron, one for the flap and one for the Spoilers. For the Spoilers I used the TGY-A55F slim servo of which also approx 2-3 have burnt down over time.
All servo's were neatly mounted and all connectors were neatly soldered with an original green Multiplex connector (2 connectors per wing). All solders were inspected with a loop and covered with shrink tube. All servo's were mounted stress free. And then suddenly one of the 9150's or TGY-A55H's (doing nothing) would get very hot and died (also randomly). As said this happened 4-5 times while I ordered new ones and replaced them. I used two different receivers. first a Spektrum 12000 (built in Bec) and later with a Jeti RX14 with a Jeti 20A Max Bex 2D EX. Not being confident anymore I decided to remove them all (10 servo's in total) and replce them for Savox, which is a second investment.....

Just my two cents...

Cheers JeffBr.

Adrian | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2016

ive had these in a 50cc edge for 4 years and these servos are completely flawless, would highly recommend!!!

sylvainfz6 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 07, 2014

exelent sero pour vgm 2m70

GadgetsRCZA | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 22, 2013

MY search for a 1/8 good buggy and truggy servo has ended. This is fast and strong. You may want to check dimension for some cars though, it is a little taller than most other servos. BUT make it fit and you wont be sorry.

jstremmler | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2013

This is the former HD-9150 servo from HuiDa company, located in HK. I use approximately 20 of these servos almost since five years. The TGY-9150 has an excellent performance and accuracy but is sensitive to high voltage. So never use it with 2 lipo's without BEC! One can use a power supply with two 2S1P LiFePO4's and two Schottky diodes for dicoupling. The Schottky's take away 0.6V from the voltage of the LiFepO4's so that your servos operate exactly at 6.0V. All my old servos with an age of almost 5 years perform like being new. This servo is a winner !

priejonas83 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2013

pessoal uso esses servos em todos meus rcs 1/8,buggy ae rc8.2, monster truck robitronic hurricane e um traxxas xo-1 ..e melhor que os savox que usavae custa metade do preo..e omelhor comprem sem medo ..da um joinha ai pra ajudar..abraos

sucram | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 24, 2013

Rein aus der Verpackung und mit dem Unitest2 getestet macht das Servo einen guten Eindruck.

Runar | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 16, 2012

Have 5 of these in my Aeroworks Yak54 50cc , run them directly on 6.6volt LiFe with 1.5" arms.
Very satisfied with centering, speed and torque.
Get 4 crowns for some minor "slop" in the gears, but it don't affect my flying.

Robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 07, 2012

I have been using these in a 55cc aerotow plane for 3 years now. They are an excellent servo and have survived 2 crashes with no damage to the servo. Just as good as "brand" name servos selling for twice the price.

Oleg173 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 05, 2012

, !!!

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!