S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

V-Lite J3 Cub 1800mm Glow Rouge / Blanc (ARF)

V-Lite J3 Cub 1800mm Glow Rouge / Blanc (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
3600 g
SKU:
J-3_CUB_46

Combinez

et économisez plus
esc
servo
motor
acc
Description
du

La chose qui vous frappe vraiment sur le V-Lite J3 est bien sûr le revêtement transparent qui vous permet de voir la superbe qualité de la construction qui se trouve sous. Il ne fait aucun doute, ce J3 a été construit avec un gain de poids à l'esprit, en fait, la cellule sèche ne pèse que 1050g, étonnant pour un modèle à l'échelle 1800mm. Léger ne signifie pas fragile, en regardant autour de la construction de cette Cub est plus comme regarder autour d'un modèle de voltige de précision!

Des fonctions pratiques comprend une aile amovible 2pc, nouveau gain de poids est une caractéristique de l'aile en utilisant espars en alliage lighweight et un tube de FC. La simple mais forte sous-chariot utilise un motif 4 de boulon qui se propage le poids et le modèle a également un second montage à l'arrière pour les flotteurs (non inclus). Le moteur reccomended est un 0,46, qui, combiné avec la cellule légère devrait donner une performance "fougueux", ok il est un louveteau mais il est bon de jeter dans la boucle étrange, décrochage tour et l'aile plus! Un véritable modèle grande recherche qui parvient à être rétro et moderne, l'échelle mais amusant, il est l'un Cub chic!

Spécifications:
Envergure: 1800mm
Longueur: 1180mm
Voler Poids: 2,6 kg
4 canaux (5 servo - Non inclus)

Comprend:
Instructions
Tout le matériel
Fuel Tank & Engine Mount

A besoin:
Your Own 4 canaux TX / RX
0,46 Glow Engine
5 x Servo standard
RX Batterie / puissance

Product
Specifications

Informations supplémentaires

  • Référence:
    J-3_CUB_46
  • Brand:
    Non communiqué
  • Poids (g)
    3600.00
  • Longueur
    1100.00
  • Largeur:
    210.00
  • Taille:
    300.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The fuselage is strong enough but the wings are broken like breadsticks. The model flies discreetly but the build quality is not good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used a .40 magnum, could use more power but still flys great, docile& stable. used as trainer with buddy box. graet for teaching a new piolt to fly.looks good flys great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
eh adquirido este modelo y vuela realmente bien muy conforme,me hubera gustado otro color en el recubrimiento pero igualmente es un buena opcion ,lo recomiendo sobre todo para comenzar.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What a beautiful BIG plane for < $100. I used the Turnigy G46 that is supposed to be the equivilent of a .46 gas motor. I used a Nano-Tech 5S-5000Ma battery and a 50A BlueBird ESC. With a 3-Blade 10/7 prop it draws ~ 30A at full power on my workbench and is a VERY strong combination!

The only hassle I had was installing the battery without an external hatch because you have to remove the wing. I added an external XT-60 male connector between the batt and the ESC and routed it to the gear strut. I use a female XT-60 as a shorting plug to turn the power on and off while leaving the battery installed. I get about 3 flights with the 5 Amp battery before I have to remove it for charging. It's interesting to see it has the rear landging gear mount already installed for a float kit, but it does not have any mounts for the lower end of the wing struts. Weird!

It is an impressive airplane and attracts a lot of comments at the field.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today 3 days to Long Island NY from USA warehouse all I can say is SWEET !!!!!!!!!!!!!!

Should have it ready to fly in a couple of days and will let you know how she flies if the weather holds good
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi this V-Lite J3 Cub 1800mm Glow Red/White (ARF) made good material when i want to buy it i had been have some concerns but when i had been have in my hand i said it made good balsa and polywood you cant broke it never best material best plane i could not see this quality anywhere thanks so much hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great plane, only the engine indicated (46) is a lot to it. I recommend a smaller engine: ASP S21A Two Stroke Glow Engine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gostei do meu ...tive de reforar algumas coisas como essas astes que seguram a asa e passar um pouco de cola no corpo dele mas emfim e exelente....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks good but very light balsa Yes the wings are long and the fuselage is short as the scale. But I think it would collapse if you try any flying tricks. The covering is very light and can puncture easily. And so much of a manual just few pages that tells you nothing. And you have to have experience to put it together. The windows plastic cover dose not fit in the place you have to do some magic to fit it to the body. And the axels are just screws and fitted with self looking nuts. You have to handle it with care as it may crack for slight pressure. You must cross check the balsa joining points. As mine needed to reinforce the part where the leading edge of the wings gets lodged it was lose and cracked. And you have to find a way to Cut the cowl in a way that match your engine. I shall post the flying experience soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
esc
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.