S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

90mm ViperJet Composite EDF Jet 1370mm (ARF)

90mm ViperJet Composite EDF Jet 1370mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
5572 g
SKU:
411000004-0

Combinez

et économisez plus
esc
battery
servo
motor
acc
Description
du

Vous sentez-vous le besoin de vitesse? Le HobbyKing Viperjet est une vraie machine, vitesse entièrement voltige avec de bons regards renversants pour correspondre à ses performances. La version 70mm a été un énorme succès et à juste titre, cette version étonnante de 90mm est sûr d'être tout aussi populaire. La cellule nue est léger, donc quelque chose de 6s up va vous donner un jet 90mm sport étonnamment pas cher, certainement rien dans cette classe regarde ce bon et de voler aussi bien pour si peu d'argent.

fuselage composite superbement peint du Viperjet et correspondant à pré-appliqué couvrant faire pour une bonne recherche modèle, combiner son look et la vitesse avec le Viperjets précision étonnante capacité de voltige et vous avez un du jet EDF le plus excitant est dans sa catégorie à un prix vous pouvez vous permettre . Ce modèle regardant magnifique est également bien comporté au moindre courtoisie de vitesse des volets pré-installés fendues et bien sûr les "winglets" qui fournissent ascenseur, jusqu'à la plus lente de vitesses, ce qui signifie une vitesse de décrochage considérablement réduit et d'excellentes manières de vol.

Un kit dur-ware complète et train d'atterrissage fixe sont inclus, escamote peuvent être installés bien sûr, avec un peu de travail. La grande surface de la canopée vous donne beaucoup d'options pour les batteries LiPoly, allant de 6s jusqu'à 10s pour les fous de vitesse réelle!

Caractéristiques:
Envergure: 1370mm
Longueur: 1250mm
Wing Zone: 31.5dm²
Charge alaire: 115g / dm3
Bare Airframe Poids: 2170g
Poids en vol: 3600G ~ 4100G
EDF Unité: 90mm
Couleur: Vert / blanc / bleu dk
Radio: 5 ~ 6 canaux

Caractéristiques:
Entièrement pré-peint et recouvert
Amovible Fan
supports Ply pré-installés pour escamote
Tout le matériel inclus

A besoin:
Your Own 6 canaux RX / TX
36mm EDF Inrunner ou moteur outrunner (1200W Min)
90mm unité de ventilation haute performance
80A ~ 150A OPTO ESC
8 ~ 9 Metal Gear, High Torque Micro / Mini Servo de
6s ~ 10s 4500mAh (minimum)
UBEC

Product
Specifications

Informations supplémentaires

  • Référence:
    411000004-0
  • Brand:
    Non communiqué
  • Poids (g)
    5572.00
  • Longueur
    1260.00
  • Largeur:
    270.00
  • Taille:
    470.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Pro: Plane looks awesome. Plane flies well. Split flaps work well. Access hatches are well designed for both EDF and battery. Plane is fully ducted from factory.
Con: Major-When they assemble this plane at the factory both of the planes I purchased have the vertical stabilizer lean to the left about 1/4".=Factory defect that cant be fixed, this is the reason for 3 stars on quality. Other Minor-Both planes also had the elevator covers rotated 90 degress so the decal on the cover had to be removed. Minor- The position of the internal wall for the front landing gear severely limits the gear height.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane came packed nicely; however, several minor paint chips on the fuselage nose area. It also appears the finish has been scuffed in places as the sheen has dulled. Very poor overall finish. Additionally, the two piece exhaust ducting is a welcomed innovation but there appears to be no room to extend the servo leads from the rudder and elevators forward thru the fuselage. Can anyone provide a "work around" for this problem? Would also like specific retract recommendations for the model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
had a few scratches out the box nothing major. flies great . im running 10s jetfan. very nice starter jet after flying a few foamies. i love it !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got the Plane
there was a scratch in the side through the paint stripe
also was a soft spot on the same side this is why the lower rating
no real problem added a little epoxy to stiffen but for the price and cost of shipping
The consumer should not have to do even a miner repair seemed to be well packed so has to be a factory quality control problem
other than that plane looks great seems to be balanced going to use Doctor,.
Mad 6S 90 EDF also bought retracts to add to the plane should be nice when done
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flying this jet on jetfan 90mm with het 1680kv on 8s , pulling 119.5 amps and 3650 watts , I epoxied all the formers and retract area. Keep it lite , mines 8 lbs 11 ozs. Cg 98-100mm from le. Just got the 120mm edf version 2100mm wing span. Eflite 15-25 retracts with tams trunnions and struts, drop in fit !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Way better than the first batch .
Flies great at 100mm cg and good power from jetfan 90 and het 1680 on 8s. Retracts are possible , look at tamjets and eflite 15-25 size. I did reinforce all the formers that I could get to with more epoxy and strengthened the retract mounts . Duct work for the fan is top notch and paint is good. Dont let others bad luck with this jet discourage you from making a good purchase and flying a fun plane.

Will tip stall if speed is to slow coming in on approach.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
received my viper jet with a 3 mm crack about 5 inches long straight up the leading edge of the vertical stab.looks just like it was not joined correct. when the 2 fuselage half's were joined together as one fuselage. Little disappointed since I have been waiting for a year for this jet to be in stock. Will try and repair It with stuff it Fiberglass and try and match the green paint .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received mine, looks Great! Will start the build next week.
Anyone using the Madthrust 10s fan/motor?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here is another video, great flyer, wemo evo fan HK edf 1900kv cc120
eflite retract tam struts 6s 4500 hk lipo
http://www.youtube.com/watch?v=uWLbs35KswU
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
https://www.youtube.com/watch?v=yrmIHHFGFOE&feature=c4-overview&list=UUUWR5wYlzVaNZQgC-WCCoSw
video on youtube
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combinez

et économisez plus
esc
battery
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.