New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

X-UAV Talon FPV V-queue Drone EPO 1718mm (Kit) V2

X-UAV Talon FPV V-queue Drone EPO 1718mm (Kit) V2

Discontinued Product

Please continue searching for a similar product.
SKU:
239000005-0
WANT FREE SHIPPING? Click here to find out more!

Le Talon FPV V-queue Drone est une cellule moulée tout EPO. Le kit est livré non assemblé avec l'EPO et laser des pièces de contreplaqué de coupe. Cette version 2 du Talon a renforcé l'aile de contre-plaqué pièces selle / support de carbone, et des morceaux de contreplaqué supplémentaires pour le montage du matériel FPV plus facile. Moins de travail de conjecture de votre part. En outre, le contre-plaqué de la roue avant montage a été renforcée pour survivre à moins de meilleures arrivées parfaites.

Avec une batterie 4S 14.8V 10,000mAh LiPoly, temps de vol sont longues, et la charge alaire encore faible grâce à la surface de l'aile généreuse du Talon. Un compartiment de fuselage généreux avec grande trappe supérieure et bulle de nez amovible vous permet d'accéder à votre équipement de FPV et la batterie de vol dans toute configuration que vous choisissez. Il est une toile ouverte pour vos besoins de FPV.

Caractéristiques:
• Kit - Tout l'assemblage et l'équipement installation requise
• cellule Moulé OEB
• montage laser moteur contreplaqué coupé et cadre de la selle de l'aile
• Version 2 Caractéristiques Talon renforcé parties des plis et l'amélioration de l'équipement de montage d'options
• bulle de nez amovible pour un accès rapide à l'appareil photo équipement.
• Grand compartiment de fuselage accueille de nombreuses configurations de batterie et FPV Equipement.
• Deux plug-in ailes Piece avec tube d'aile de carbone
• Roues de tangon détachables

Spécifications:
Envergure: 1718mm
Longueur: 1100mm
Poids en vol: 2500-3000g
Wing Zone:. 60 sq dm.

A besoin:
Transmetteur Canal 4+ et récepteur w / mélange V-queue
Batterie 4S 14.8V 5000-10000mAh LiPoly
2 x 9g Servos
2 x Servos de 17g
3648 1100KV Brushless Motor
12 pouces ou moins hélice diamètre
Contrôle 70A Brushless

  • UGS 239000005-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 4050.0000
  • Longueur 1030.00
  • Packaging Width 230.00
  • la taille 400.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent!
Smooth glides through the air, little friction, allows low consumption in flight, very tough.
I could fly 25km with 10A in 4S and land with battery 15,2v. Total weight 2.9 kg. Used engine 1000kV 3608 KD with Helix 10x7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent!
Smooth glides through the air, little friction, allows low consumption in flight, very tough.
I could fly 25km with 10A in 4S and land with battery 15,2v. Total weight 2.9 kg. Used engine 1000kV 3608 KD with Helix 10x7.

Very... Very.. Good for Fpv.
My TALON flies 10A 4S Lipo Batery
His final weight is 2,95kg
Can fly more than 25km full and consume only 5A.
His average speed and 60 km / h.
Stol is 35km / h
Already surpassed the 164 km / h without problems.
Use Esc 60-80A YEP, 3608 Motor KD 1000kV, Propeller 10x7, OSD Arkbird, Servants Metal MX 17g, TX-RX 1.2, tracker antenna, UHF Immerssion 200-600mw. I never needed to use 600mw. I walked over 11km to 700 meters high with clean signal and 200mw UHF smoothly.
Consumes in straight flight level stabilized around the 14th or 244mah per minute.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very... Very.. Good for Fpv.
My TALON flies 10A 4S Lipo Batery
His final weight is 2,95kg
Can fly more than 25km full and consume only 5A.
His average speed and 60 km / h.
Stol is 35km / h
Already surpassed the 164 km / h without problems.
Use Esc 60-80A YEP, 3608 Motor KD 1000kV, Propeller 10x7, OSD Arkbird, Servants Metal MX 17g, TX-RX 1.2, tracker antenna, UHF Immerssion 200-600mw. I never needed to use 600mw. I walked over 11km to 700 meters high with clean signal and 200mw UHF smoothly.
Consumes in straight flight level stabilized around the 14th or 244mah per minute.

This plane flyies fantastic.
Is fast, agile (neutral stability) and very difficult to tip-stall. If it does, it is easy to recover.
Very easy to hand launch, very hard for rolling take-off.
Tips:
Correct CG position is 100mm from leading edge (110mm is the aft limit as it becomes pitch neutral stable).
Control throws work well at 22mm for Vtail and 18mm for AIL, as measured at their inner edges
Plenty of room to have all equipment inside, including 5.8ghz antennas, for clean and efficient airflow.
Important TIPS:
V-TAIL (X-UAVs idea to break your b*lls)
If your plan to connect Vtail servos with a Y-Cable or your autopilot/stabilizer (FEIYU eg) are not V-tail compatible, or your Vtail mixer pulses are not for the task, you have to REVERSE the position of one of the V-tail servos. So you need to check proper control movements before gluing the second V-tail servo.
If you insist on using your unnecessarily expensive autopilot/stabilizer (FEIYU eg) you can create a rudder control on the vertical lower fin and use V-tail as elevator only (still you will have to flip one of the servos)
AILERONS
Set servo control horn for a lot of mechanical (if Y-Cable connected) differential throws to counter act the impressive adverse yaw that this plane has. (google it if you don't know how)
EQUIPMENT
Put as much equipment weight (batteries, rx, autopilots etc) on the righ

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane flyies fantastic.
Is fast, agile (neutral stability) and very difficult to tip-stall. If it does, it is easy to recover.
Very easy to hand launch, very hard for rolling take-off.
Tips:
Correct CG position is 100mm from leading edge (110mm is the aft limit as it becomes pitch neutral stable).
Control throws work well at 22mm for Vtail and 18mm for AIL, as measured at their inner edges
Plenty of room to have all equipment inside, including 5.8ghz antennas, for clean and efficient airflow.
Important TIPS:
V-TAIL (X-UAVs idea to break your b*lls)
If your plan to connect Vtail servos with a Y-Cable or your autopilot/stabilizer (FEIYU eg) are not V-tail compatible, or your Vtail mixer pulses are not for the task, you have to REVERSE the position of one of the V-tail servos. So you need to check proper control movements before gluing the second V-tail servo.
If you insist on using your unnecessarily expensive autopilot/stabilizer (FEIYU eg) you can create a rudder control on the vertical lower fin and use V-tail as elevator only (still you will have to flip one of the servos)
AILERONS
Set servo control horn for a lot of mechanical (if Y-Cable connected) differential throws to counter act the impressive adverse yaw that this plane has. (google it if you don't know how)
EQUIPMENT
Put as much equipment weight (batteries, rx, autopilots etc) on the righ

FPV . . ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

FPV . . ...

Good X-UAV Talon FPV V-tail Drone EPO

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good X-UAV Talon FPV V-tail Drone EPO

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save