S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Écran X350 350W Smart Touch 6S balance Chargeur

Écran X350 350W Smart Touch 6S balance Chargeur

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
1361 g
SKU:
190000003

Combinez

et économisez plus
acc
Description
du

Le tout nouveau chargeur X350 est le dernier et le plus innovant chargeur de batterie, avec son esthétique super cool et plein écran tactile couleur, c'est devenu le "must have" chargeur pour tous les fans de RC. Le X350 Chargeur fournit même charge des graphiques de la batterie. Le X350 a la capacité de charger LiPo, LiFe, NiMH, NiCd, Pb .... types de piles les plus courantes. Puissance de sortie maximale est 15A, ce qui signifie une charge 11.1V 2200mah peut prendre aussi peu de 10 minutes.

Le X350 est également doté d'un tout en un conseil d'administration de la balance qui comprend maintenant un chargement USB
installation (5v 2.1A Output) qui est idéal pour iPhone ou les téléphones Android de charge.

Caractéristiques:
• 4.3 "pouces écran TFT écran tactile
• processeur 32 bits
• Interface multiple de langue
• IBP adaptateur bord- pour Deans, Tamiya, EC3, et d'autres connecteurs
• Port USB
• Prise en charge de 6 types de la chimie de la batterie différents
• Jusqu'à 6S Lithium
• Taux de charge maximum 15 ampères
• Alimentation DC Seulement

Spécifications:
Écran tactile: 4,3 pouces 480 x 272 px
Plage de tension de fonctionnement: 11.0 ~ 18.0V
Circuit d' alimentation: Max 350W (charge) et Max 40W (déchargement)
Charge Gamme de courant: 0,1 ~ 15A
Décharge Gamme de courant: 0,1 ~ 6A
Consommation de courant pour l' équilibrage LiPo: 300mAh / cellulaire
Batterie au lithium Cell Count: 1 ~ 6 series
NiCd / NiMh batterie Cell Count: 1 ~ 16 cellules
Pb tension de la batterie: 2 à 24V
Dimension: 148 x 140 x 48mm
Poids: 0,55 kg

Le forfait comprend:
X350 Chargeur
All-in-One Balance Board
Rouge Noir fil conducteur
Clips Crocs
Stylet pour écran tactile

S'il vous plaît voir la section des produits connexes (ci-dessous) pour alimentation secteur.

Product
Specifications

Informations supplémentaires

  • Référence:
    190000003
  • Brand:
    Non
  • Poids (g)
    1361.00
  • Longueur
    270.00
  • Largeur:
    85.00
  • Taille:
    175.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent Lipo charger, the touch screen is great! It is easy to operate. I did not experience any overload problems. ALWAYS use BALANCE to charge your lipo's. I have charged anything up to 6S NO PROBLEMS, u have to use it properly. Recommendable charger, Super!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Stay away from this charger. It overcharges your Lipos! 4,30 per cell. Other problems: You can't switch off the max charging capacity of 5000mah and two hours charging time. If you try to charge a 8000mah Lipo -> Fail. If you like slow charging times of more than 2 hours -> fail.
I even wrote to the manufacturer if the firmware could be modified. They answered me, that they had carefully thought about the functions and that they decided to keep it this way.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really bad charger. Potential to overcharge which is VERY dangerous.
You can't turn of the max. charging time. (200mins) :-( Max. mAh is 5000mAh - total bull**it!


verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trash. I set the current at 8A. The charger runaway (autonomously) keep upping the current (15A ) until my power supply maxed out with over current protection. Ruined my 6S A-spec 5.0 pack. Luckily the over current protectio of the power supply kicks in otherwise a LiPO fire would occur. Same thing happened on the 2nd try. I stopped the charging manually.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've bought this one in addition to my X120 which is working fine and has the right connectors for my batteries.

This one has a separate balance board which does have neither HXT 4mm nor JR NiMH connectors. I had to solder my own connector to charge Turnigy 6S nano and NiMH batteries. There should be at least sockets for 4mm banana plugs which would receive most of the charging cables.

A charger which can handle 10A on 6S should be equipped with suitable connectors. In case that's too difficult, an appropriate cable should be provided - if unavoidable at cost.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, all seems well. Unboxed, and played with, mine will not exceed 39W discharge on any pack tried, 1000mah 7.4 to 3000 14.4 even though discharge amps were set to 6A. Charge tests will take a little longer, though the 7.4 packs balanced to 4.2/cell each. I will need to add a pair of banana jacks (main body) or modify some charge leads to cope with nicad/pb etc. I am running it off a SLA and charger.

R
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello,
I have bought this charger some weeks ago and the interface and ability to display charge curves on the screen while indicating real time voltage of each cell is very interesting to check the health of each cell. One point, there is a "temperature port" integrated to the balance board. I have connected the Hobbyking temperature sensor (idProduct=76275) I just received, which is equipped with the same plug, and it almost caught fire. Where is the mistake? cabling? function not implemented in the charger? anyway, it is a little bit dangerous.
Best regards
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great charger, works well and keeps balance well within 0.035.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This charger is a POS!!!!! From the time I received this charger, it will not charge any battery over 95pcnt. Towards end of charge cycle, amps jump up off scale, and I get an error that says output voltage to high. Have tried on different size C rating, and 2 cell to 6 cell, same thing every time. DONT BUY THIS CHARGER UNLESS YOU LIKE TO WASTE YOUR MONEY ON GARBAGE!!!!!!!!!!!!!!!!!!!!,!!,!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Dont BUY this Charger ,it did not work at ALL. You cannot load any Lipo or Nimih or whatelse !!!I cannot understand that HK offers such aterrible Loader!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • x350 Charger

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.