Êtes - vous fatigué de voir les mêmes plans dans votre club local?
Le X43A est un modèle jet d'rc très inhabituel NASA test hypersonique, équipé d'un système solide de 64mm EDF de puissance et 30A ESC combinée à la forme aérodynamique inhabituelle de la X43A et vous sera bientôt crier à travers le ciel en laissant les spectateurs se demandant. Tous les servos sont pré-installés et vous avez juste besoin d'inclure la batterie 3S et votre propre récepteur pour le mettre dans un vol d'essai.
Certainement un sujet de conversation à tout champ de club ou de vol.
Voler Poids: 585g
Moteur: Puissant 4100kv Brushless Outrunner
Fan Duct: 64mm
Votre propre TX & RX
1300mah 3S Lipo
Capacité ( mAh )
My flight video can be found under: RC Scramjet x-43 on youtube
It flies great but it`s tricky to see the angle of the plane have put some yellow stripes on the bottom, also put some strong packing tape on the edf bottom if you land it without gearFlew it for the first time, grass was too long so i hand launched it,,it flew like a trainer, maintained level flight at 1/2 throttle, loops and rolls like a pattern plane.
Great low speed handling for landing. I will put daryglow orange stickers on the fins and bottom. In some flight attitudes it looks like a thin black line in the sky!!!plane arrived a month after i ordered it,my guess is U.S customs.did not have enough power to stay in the air.used 2200 mah battery,still nothing im going to use the aircraft for parts now.A flying video can be found on youtube just search for
RC Scramjet x-43I had my maiden flight and it was quite dificult to see if the plane is flying upwards or downwards. I flew it without gear and landed it on the bottom, needs to be strenght. It flys quick and looks very nice in the sky but it is tricky to recognise the planes angle. lands nice and quick. I`m thinking about a better EDF Motornice finish, easy to assemble HOWEVER very difficult to fly - hard to control, EDF to weak, easy stall but - I must admit - lands nice and quick. Not recommended for beginner pilot.This plane arrived quickly and was delivered without damage. It flies nicely for the most part, however not recommended as a first edf plane. One important thing to note is that it easily stalls during turns and is very hard to recover from stalls. Make sure than when turning you keep the speed up. It is quite durable, however, and on a bad crash into the ground (because of stalling) only the nose broke off, which is easily repaired.Got mine in a couple days ago, put it together and flew my maiden today.
I had the servo throws waaaay too far. It was extremely uncontrollable and I flew it into the ground. It was my first time flying a delta wing, and it was the first time using my transmitter, so it was actually my fault for not taking it easy on the servo throws.
Before flight I painted the underside a different color (strongly recommended).plane arrived only three days after ordered with only miner damage to the under side of the fuselage.The foam appears to be good quality and is much bigger than appears in the pictures. will post the flight performance soon.