Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

XK2445-3500KV Brushless Inrunner

Generating Links

XK2445-3500KV Brushless Inrunner

Prix:

Now save économisez 0,00 € 0,00 €

19,87 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9393000009
Livraison gratuite? Cliquez ici pour apprendre plus!

XK2445-3500KV Brushless Inrunner

Specs.
Nombre de pôles: 4
Max Amps: 28A
Max Volt: 8.4V
Max Watts: 235W
Rpm / V: 3500kv
Résistance: 0.056 ohms
Aucune charge actuelle: 1.9A
Dimension: 24mm x 45.0mm
Montage profondeur du trou: 4.5mm
Longueur de prolonger l' arbre: 11mm
Diamètre de l' arbre: 0.3mm
Poids: 75.6g

  • Kv ( rpm / v) 3500.00
  • Max Current (A) 28.00
  • Résistance ( mh ) 56.00
  • Max Tension (V) 8.00
  • (W ) 235.00
  • Arbre A ( mm ) 0.30
  • Longueur B ( mm ) 45.00
  • Can Diamètre C ( mm ) 24.00
  • Longueur Can D ( mm ) 43.00
  • Longueur totale E ( mm ) 57.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 18, 2016

not direct fits for 1/16. mounting holes will not lign up with your 1/16 models.

Dmitry | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 11, 2015

bought 3 of them. 2 for kyosho blizzard (it has very momentary transmission) so it is ok.
but x-ray m18t pro with this motor and big wheels and 15t pinion starts with difficulties though another motor ~18t starts ok. so it is sad for me. I suppose that this motor has ~10 turns and cannot be used in 1/18 truggy and monsters.

herratic | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 31, 2013

MOTOR NOT USABLE OUT OF THE BOX. Exactly as Whipper snapper, bought two of these motors and they both aren't spinning free because the rotor is too tight between the bearings. I tried to open it to try and solve this problem myself but the two phillips screws are impossible to unscrew, I am worried I'll strip the head and end up doing a butcher job just to make the motor usable. I'll come back for an update when I get the time.

_Ales_ | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 19, 2013

I bought the motor and found that the rotor is rotating too tough. The size of rotor is large so bearins are blocked. Bad quality. Motor heats up very quickly. Working only on 2S to get full power. 3S block my ESP at full power.

whipper Snapper | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2013

Brought 2 of these used one for replacement motor on my Centurion Mini catamaran old one being a 3000kv finally died after 2 years of hard runs...this was a great replacement feels a bit faster but glad made the purchase not over-heating problems def recommend it for the Centurion...i running 35amp esc with 25c 2200mh 3S pack

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags