S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

XK3650-3200KV Sensored Brushless Inrunner (15.5T)

XK3650-3200KV Sensored Brushless Inrunner (15.5T)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
248 g
SKU:
XK3650-3200KV

Combinez

et économisez plus
acc
Description
du

Specs.
Max Amps: 25A
Max Volt: 7.4V
Max Watts: 185W
Rpm / V: 3200kv (15.5T)
Résistance: 0,0265 ohms
Aucune charge: 2.5A (7.4V)
Dimension: 35.8mm x 52.5mm
Montage profondeur du trou: 4mm
Longueur de prolonger l' arbre: 15mm
Diamètre de l' arbre: 3,175
Poids: 165g

Product
Specifications

Informations supplémentaires

  • Référence:
    XK3650-3200KV
  • Brand:
    Non communiqué
  • Poids (g)
    248.00
  • Longueur
    78.00
  • Largeur:
    37.00
  • Taille:
    57.00
  • Kv ( rpm / v)
    3200.00
  • Max Currents (A)
    25.00
  • (W ):
    185.00
  • Longueur B ( mm ):
    53.00
  • Longueur Can D ( mm )
    44.00
  • Max Tension (V)
    7.00
  • Arbre A ( mm ):
    3.18
  • Unit Weight (g):
    165
  • Diamètre C ( mm )
    36.00
  • Longueur totale E ( mm )
    67.00
  • Résistance ( mh ):
    27.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
AWESOME motor! i am running a HSP bronto (same as Exceed infinitive, Redcat Volcano EPX, and himoto makes something similar)... stock size tires (120-125mm), stock diff (2.92:1), and a 19t pinion on 64t spur... temps are around 100-110F with low timing... and i get about 30-40 mins of runtime from a 2S 5200mah lipo

this link can help with gearing http://www.scriptasylum.com/rc_speed/top_speed.html
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good Price! Appearance is also good!

My TT01 is a 22-55 gear ratio settings.

PRODUCT ID: HK-SENS-35A and matching

Good start! And a smoother ride

Also recommended is 100mm Sensor Lead with Mesh

Cogging Torque is then disappears.

Nice HK~!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this for a B44 I'm building up. It's my 1st real rc car so I don't have a lot to compare it to, but I've ran it a couple time now and am very satisfied. I'm using the sensored hobby king 60A controller and 3S lipo, 18T pinion on stock spur gear. It's fast and the motor doesn't seem to be getting more than slightly warm. It has enough power and torque that it's hard to control, it will do 4 wheel burn outs if you don't modulate the throttle. Not sure how it would stack up against a name brand brushless, but it seems to be a well built motor. We'll see how it does over time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice motor, works very well in my SC10 2wd. It is probably a 10.5T winded motor. It gets every time about 50-60 motor temperature after a drive with a 40C LiPo. I drive my SC10 on an outdoor clay track in south-germany. Outdoor temperature was about 25.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad little motor, arrives in plain packaging, motor looks solid, although sensor port is a bit rough in finish, easy to solder leads to, worked well in sensored mode on a SC10 geared 18/84, very smooth, good torque and came off at 110f after 15 minutes of hard running.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.