Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

XK3650-7900KV Sensored Brushless Inrunner (5T)

Generating Links

XK3650-7900KV Sensored Brushless Inrunner (5T)

Prix:

Now save économisez 0,00 € 0,00 €

37,70 €
Expédié de:
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
XK3650-7900KV
Livraison gratuite? Cliquez ici pour apprendre plus!

XK3650-7900KV Sensored Brushless Inrunner

Specs.
Max Amps: 60A
Max Volt: 7.4V
Max Watts: 445W
Rpm / V: 7900kv (5T)
Résistance: 0,0045 ohms
Aucune charge actuelle: 7.2A (7.4V)
Dimension: 35.8mm x 52.5mm
Montage profondeur du trou: 4mm
Longueur de prolonger l' arbre: 15mm
Diamètre de l' arbre: 3,175
Poids: 165g

  • Kv ( rpm / v) 7900.00
  • Max Current (A) 60.00
  • Résistance ( mh ) 5.00
  • Max Tension (V) 7.00
  • (W ) 445.00
  • Arbre A ( mm ) 3.18
  • Longueur B ( mm ) 53.00
  • Can Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 44.00
  • Longueur totale E ( mm ) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

lapse | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 21, 2012

Wish it came with some wires so I wouldn't have to solder.

nckmat | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 14, 2011

Put this in my DB01 4WD buggy and it is a seriously quick motor, maybe not as quick as the equivalent from one of the big brands but then it is also about a third of the price. My only complaint is that it has fixed timing but when you have this much power does it really matter? I would definitely recommend this to anybody who wants a cheap mod motor for racing, but only when your motor is in-board as the ventilation holes could pose a problem for rear mount motors in buggies such as TRF201 or B4.

touch n go | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 03, 2011

Excellent motor!!! Use it on my Tamiya F103GT 2wd. Esc was Turnigy Trackstar 60A, Lipo Turnigy 4000mah 2s hardcase, gear at 3.61. After 15min run everything is only slight warm to touch!
The motor is so quiet when running, motor start smooth with minimal cogging in sensorless mode. Good construction and strong magnet. Thanks Hobbyking!!!

chakal | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 24, 2011

Drive it on the HPI Sprint 2 with HK 100A sensor, it is worth every cent. Cheap and strong, works well.

Dash8 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 10, 2011

Have this on my TC4 with the 60A esc, goes like stink. runs very cool and makes theold 5700KV i had in there look like a toy

Mav75 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 24, 2011

Easy to solder, solder took to the cups very easily. The actual colour of the motor is not black as the picture leads to believe, it's grey. Bench runs fine with the sensored 60A car esc in sensored mode.



It's build construction is excellent and very clean with access to both end bearings to add some scorpion oil when needed without having to open it up. Hand turning the shaft suggests a very strong magnet.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!