S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

XK3665-2400KV Brushless Inrunner

XK3665-2400KV Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
334 g
SKU:
XK3665-2400KV
Description
du

XK3665-2400KV Brushless Inrunner

Specs.
Max Amps: 80A
Max Volt: 14.8V
Max Watts: 1185W
Rpm / V: 2400kv
Résistance: 0,0100 ohms
Aucune charge actuelle: 3.4A
Dimension: 36mm x 65.0mm
Montage profondeur du trou: 4.5mm
Longueur de prolonger l' arbre: 18.5mm
Diamètre de l' arbre: 5mm
Poids: 370g

Product
Specifications

Informations supplémentaires

  • Référence:
    XK3665-2400KV
  • Brand:
    Non communiqué
  • Poids (g)
    334.00
  • Longueur
    130.00
  • Largeur:
    50.00
  • Taille:
    78.00
  • Kv ( rpm / v)
    2400.00
  • Max Currents (A)
    80.00
  • (W ):
    1185.00
  • Longueur B ( mm ):
    65.00
  • Longueur Can D ( mm )
    63.00
  • Max Tension (V)
    15.00
  • Arbre A ( mm ):
    5.00
  • Unit Weight (g):
    308
  • Diamètre C ( mm )
    36.00
  • Longueur totale E ( mm )
    80.00
  • Résistance ( mh ):
    11.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
For the money its good value. I bought it as an experiment to see how it would perform in my Smash Shark mono-hull running on a 4S with a water cooling jacket, 120A ESC and spinning an Octura X440 3 blade prop. It lacked a little bit of bite compared to the Stock 3660 2075KV which I put down to a lack of low speed torque, bur once "out of the hole" its got a good top end but I havent noticed a marked increase in speed. I will now build it into a 800mm rigger I am building where the lack of punch isn't going to be an issue and that should allow it to reach around 80-90k's hopefully.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor use it on my pursuit rc boat even fit the original cooling jacket no mods.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've ran this motor several times and so far I have not met any problems to date.

I matched it with the 36mm cooling jacket that you can buy here in HK. With this combination, it's cheaper than buying a motor with built-in cooling jacket by at least $5 and works better in my opinion. This motor does not come with a female bullet connector for the ESC so just make sure that you have a 4mm bullet connector and matching heatshrink tube to seal it. In my opinion it's a good buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Love this motor have it in 2wd slash, race on track does great i will by again for sure... great motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kfkfjfjfkfjfjfjfjgjfjjfjjfjfjfmfkfjfmfmf
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an excellent choice for a brushless motor for any 1 8 scale car. Has a lot of torque and will make your car increase in will spins and wheelies. The reason why i gave four crowns for quality as the one mounting hole was slightly not in position meaning it need some mods for it to fit. overall excellent for its price and performance. keep up the good products HK and Turnigy.

Ayden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is 2 poles, construction as KDA inrunner but sectional, and a slightly better efficiency, but beware of contact between the cable and the rear facing the engine, there may be short circuit, it is good to analyze and implement control.I run in my 1:8 Truggy Caster with Turnigy cooler, the temperature is higher but in order.For the money a good buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.