XK3665-B-3190KV Brushless Inrunner
Nombre de pôles: 4
Max Amps: 110A
Max Volt: 11.1V
Max Watts: 1220W
Rpm / V: 3190kv
Résistance: 0,0060 ohms
Aucune charge actuelle: 5.0A
Dimension: 36.0mm x 65.0mm
Montage profondeur du trou: 45mm
Longueur de prolonger l' arbre: 185mm
Diamètre de l' arbre: 5mm
Kv ( rpm / v)
Max Currents (A)
Longueur B ( mm ):
Longueur Can D ( mm )
Max Tension (V)
Arbre A ( mm ):
Unit Weight (g):
Diamètre C ( mm )
Longueur totale E ( mm )
Résistance ( mh ):
good for using, I use it for boat. I test them OkBrilliant motor. Use this in a Turnigy Trooper with the Turnigy SCT 120A esc. Goes like a rocket with a 16 tooth gear and motor only gets warm to hot after a hour of rough off road bashing on a 3s lipo.. Pops wheelies on a 3s and throttle - thinking of trying a 4s with it. No issues so far have beaten the hell out of it for a few months now no issues blew a few tyres though popping massive wheelies. Great motor would recommend to all.I'm running this motor in my Losi scte 4x4 2.0 & runs really great!!!!
It keeps up whith the Tekins in the track specialy in the straight way
I'm runing a 18 pinion around 120 to 130 F with a cheap fan after running
in the track. Now waitin for long term use, I'll get back to you...Works beautiful lots of power in my Turnigy Trooper wow gets it down the road fast with a 3s 14 tooth pinion and 120a esc it's a monster now...running this in Traxxas slash 4x4 with trackstar 120A esc run cooler then stock vxl did on 3s, maybe not so much punch (maybe just esc settings ?) but is fine when the main problem before was heat ill report back when we check temperatures with gun, the truck is running 12t : 54t with stampede size trenchers. for the price it is really good imoI really like this motor, run it on 3s in my Stampede 4x4 with a shroud in the snow and it stays right at 160F after a full pack. $26 is such a great deal for a 3665 sized 4 pole motor, even have the 2500kv version to try out to ;).i have used this motor in a losi ten t 4x4 and it has tones of power and runs really cool and get a long run time. very good motor and i am a hard person to please!!The best motor I've had from HK so far. Finish is superb and the flexible leads and bullets are top quality.
I put it in my VMX 450 with 17t pinion and it is the most torquey
motor yet, very smooth, heaps of power and is running way cooler.
Once again I am very happy with what you get for the price.