Y-3 en fibre de verre Tri-Copter Cadre (KIT)

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 13, 2015

very crazy build, tuning the FC was a bit tough but so worth it

• Overall
• Quality
• Value

Customer Rated

Aug 20, 2014

Das Design ist Klasse, man kann die Fluglage sehr gut erkennen. Mngel konnte ich nicht feststellen. Klebungen, Mechanik und Lackierung ist alles in Ordnung bei meiner Lieferung.
3* Turnigy Aerodrive SK3 - 2836-1040kv, TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo, 3000 - 3600 mAh 3S. Hobbyking KK2.1.5 board
Es ist mein erster Multicopter und ich bin begeistert, kann ich nur weiter empfehlen !

• Overall
• Quality
• Value

Certified Buyer Rated

May 30, 2014

Frame is not well made. No instructions for anything.

• Overall
• Quality
• Value

Certified Buyer Rated

May 19, 2014

Quality is brilliant , light well built .. would be nice if it was available as a PNF :)

• Overall
• Quality
• Value

Customer Rated

May 17, 2014

Flyes perfectly with a lot of power, with the following components: TGY-306GHV Servo, KK2.0 Multirotor Control Board, 800KV Brushless Motors, Turnigy Multistar 45Amp ESC's, 10x5 Props. RH rotation, or 10x4.5 Props RH rotation,blue LED strips meets perfect for a good looking Tricopter.
7 minutes flys with 4s 2200mah and 12minutes with 4s 4000mah
https://www.youtube.com/watch?v=IOR2wJpv9nc&feature=youtu.be

• Overall
• Quality
• Value

Certified Buyer Rated

May 04, 2014

Oooo!!! A beauty. Have one and i might say that is a very good balanced frame, offering a lot of space for big motors like the hexTronik DT750 Brushless Outrunner 750kv, easy access to flight controller and battery compartiment. Overall a Beauty!!!

• Overall
• Quality
• Value

Customer Rated

Apr 26, 2014

Okay, I have a small issue with this bird, and it appears that many people have small issues with it. So, quality could be improved. Having said that, I love this bird! She's the new queen of the fleet, and I'm finding myself spending lots of time with her. I've loaded the FC up with MPNG, made a homemade platform for the GPS module, which looks very stealthy, mounted 505 RGB LEDs top and bottom, with a controller on a separate 350 mAH battery, Turnigy Aerodrive D2830-11 1000kv motors, which are adequate, if not stunning as far as power and speed goes. And the de riguer TGY-306G-HV servo at the yaw. I've also cannibalized my Hubsan X4 for it's HD camera, which is mounted at the fore. Pretty tricked out, and I'm probably not finished. I also plan to add nav lights, beacons and strobes. I might also mount some lasers...no, I'm not kidding...muahahahahahahaha!

• Overall
• Quality
• Value

Customer Rated

Jan 18, 2014

i love this model it fly great i put the k2.1 board and 3 e flight 400 motor in it with 3 turnigy 30 amps speed control... As for the build not too bad i got in done in no time the only thing i wish it had was a back cover to hide the motor in the back but for the price no worries thanks hobbie king good job on this one..

• Overall
• Quality
• Value

Customer Rated

Jan 07, 2014

Kit looks very good on the first view.
But on second view shows poor quality. The bulkhead for the tilt mechanism was glued in twisted. You need to install a spacer on one side (6-7mm) to get the tilt mechanism installed properly. In addition, the alloy bulkhead and motormount of the tilt mechanism are miss machined.Only one bore to install the motor. The other 3 are not cut properly.

In sum, a lot of rework needed to get all the quality issues fixed.
Hk, you need better quality inspection

• Overall
• Quality
• Value

Customer Rated

Dec 20, 2013

Received my C3 tricopter and I am very impressed.It is lightweight strong and well thought out I am installing the electronics and can not wait to fly it.
I hope all the team at Hobbyking have a great holiday season,thanks for another great value product and long may it continue happy flying everyone
and all the best for 2014.