S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Yak 54 Voltige 3D 30cc Balsa (ARF)

Yak 54 Voltige 3D 30cc Balsa (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
6835 g
SKU:
GLYak54-30cc

Combinez

et économisez plus
battery
servo
motor
acc
Description
du

Le HobbyKing Yak54 30cc à grande échelle des avions 3D est construit à partir de contreplaqué et de balsa avec un capot en fibre de verre et de carénages de roue. Fini avec le souci du détail le modèle est recouvert de film de qualité couvrant et comprend aluminium cornes de surface de contrôle avec des tiges de poussée de liaison de balle et un système de fil de traction de traction pour le gouvernail.

Vous aurez besoin d'un moteur à essence 30cc, 6 taille standard couple élevé servos à engrenages en métal, une radio 6 canaux avec le mélange et un accessoire 20x8 pouces et spinner pour compléter ce modèle.

Un réservoir de carburant et pack de matériel de qualité ont été inclus pour assurer la Yak54 restera un favori dans votre hangar pour les années à venir. Ce modèle est un interprète se démarquer, nous avons été impressionnés par la finition et la qualité de l'emballage du matériel généralement inclus dans les modèles plus chers. Si vous aimez le vol 3D alors la Yak54 vous avez à faire des rouleaux de couple, yo-yo, busards et des cascades sans manquer un battement!

Spécifications:
Envergure: 1830mm (72po)
Longueur: 1767mm (70in)
Voler Poids: 4 ~ 4,5 kg
Wing Zone: 58 Sq.dm (904 sq dans)
Moteur: 30cc (obligatoire)
Radio: 6 Channel (Obligatoire)

Obligatoire:
Moteur: 30cc
Radio: Votre propre Tx / RX (6 canaux)
Servos: 6 Standard (High Torque MG)
Prop: 20x8in Prop et Spinner

Considérations particulières d'expédition:
-Désolé, Nous ne pouvons pas expédier ce point à Etats-Unis. Elle est trop grande.
-Ce Parcelle peut-être pas être combiné avec d'autres éléments dans le même achat en raison de la taille.

Product
Specifications

Informations supplémentaires

  • Référence:
    GLYak54-30cc
  • Brand:
    Non
  • Poids (g)
    6835.00
  • Longueur
    1390.00
  • Largeur:
    235.00
  • Taille:
    520.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
UPdate to first review:
I have found the construction to be real light, some times too light. There are no places to mount power switching without plugging some of the lightening holes.
The rudder cables interfere with the elevator servos and there is no real fix for this. It will be something to watch during maintenance checks.
I added a couple 1/4" ply block inbetween the bulkheads for the landing gear mount. I think this will be a weak point in the model and my require a different approach.
The covering is monocote compatible. The firewall is weak so I fiber glassed mine. Seems better. It's pretty easy to crush when mounting the motor and may need a 1/8" additional ply behind to make it stronger. That to be seen as well.

CG comparison with other mfgs comes out at anywhere between 5 1/2" and 6 1/2" at the root, from leading edge or about 27pcnt of the MAC

Throws
Aileron 18 degrees /-
Rudder 1 1/4" /-
Elevator 12 degrees up and 14 degrees down gives an even feel.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just opened the box, that in itself was a challenge. They really use a tough box that's glued together, no opening lid on this one. You have to cut the lid off to get into it.
The model, covering is excellent, tight and finished well. I expected it to be cheap for the price but instead it's very well done. I have Aeroworks planes and this is very close to equal. I got it to fill a size need, a plane where the receiver quit and was totaltotaled.
I will not be embarrassed to take this to the field.
Don't be afraid to buy this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Beautiffuly made, bargain price and flies great.

TR32 makes it a 3D flier.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich bin sehr zufrieden mit der Yak. Fliegt alle Figuren schn sauber ohne irgendwelchen Macken. Kann richtig schn langsam geflogen werden. Landet sich demzufolge sehr gut.
Fliege mit einem DLE-30 Verbrennungsmotor und komme so auf 5,5kg Abfluggewicht.
Die Verarbeitung ist im groen und ganzen Gut. Hier und da muss ein bisschen nachgebessert werden. Die mitgelieferten Radschuhe und Rder passten nicht zum Modell. Waren viel zu klein. Habe 240mm Radschuhe und 90mm Rder ran gemacht. Desweiteren habe ich gleich die Fahrwerksaufnahme verstrkt. Ein bisschen Schade finde ich das keine Anleitung dabei ist. Aber fr ein gebten Modellbauer sollte das zu schaffen sein. Schwerpunkt ist auf Hhe des Steckungsrohr.
Fr den Preis einfach unschlagbar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane comes well packed, and in good time, looks like the same plane in the picture.
Control horns are predictably bad, (folded aluminium), so build decent ones into your order.
No instruction manual but its online somewhere, I did have a look at it but as with most advanced kits you will probably have your own ways of doing things anyway.
Goes together well, bit of trimming here and there, usual weak UC mount so epoxy everything. I painted the firewall area with fuel proof as usual.
Flying - CG on wing spar will give moderate 3D and decent stability, to achieve this you need to mount batteries in front of spar and the tank in the firewall, (2 X 1600 3s for RC and 1 X 1000 2s for CDI). I used a power distributor from here with a built in CDI kill.
First flight on 50pcnt and 80 expo was very twitchy until I got the trim in, then a very happy remainder of flight.
I used a RCG 26 running in on a 16/8 prop and its fine, When I move onto the 18/8 it will be spot on but most people will probably go for a 30 as required.
The cowling will not fit a stock exhaust without cutting and there's no chance of a pitts muffler fitting so be advised.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well built model and deserves 5 stars , Comes without a manual but this is no problem for an experienced builder, with regards to the ill fitting wing issue the covering on the fuselage just needs cutting so that the wing slides part way into the fuselage. Cannot believe the quality for the money, will lend itself well to electric. So if you are an experienced builder grab a bargain, you won't regret it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Das Modell ist auf den ersten Blick gut verarbeitet..nur leider ist die Halterung fr das Fahrwerk sehr instabil..bei einer hrteren Landung reit das Fahrwerk ab und die Rder zerstren die Flgel...Flugverhalten ist sehr gutmtig...fr den Preis ein sehr gutes Modell
Ich fliege die YAK mit SK3 6354 260kv und 10S Lipo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
BEWARE! Parts not available...I have to deal with a broken canopy and cowling, damaged During shipping: nightmare! So much for being a premium customer, no solution after several weeks! Customer support agents friendly and professional but still...now it was asked that I send the broken items...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice quality kit as mentioned but both canopy and cowling damaged During shipping. Not enough protection and padding inside this big strong box. Will be a test for HK client service.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
well the wings doesnot fit well, living a big gap in the back of the wing...terible made...very disapointe
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
battery
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.