S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Z600-V3 Cadre Quadcopter Avec Mid-Crab Landing Gear (600mm) (Blanc / Rouge)

Z600-V3 Cadre Quadcopter Avec Mid-Crab Landing Gear (600mm) (Blanc / Rouge)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
568 g
SKU:
450000066-0

Combinez

et économisez plus
acc
Description
du

Le Z600-V3 est un cadre super-dimensionné et bien pensé 600mm quad construit à partir de matériaux de qualité. Le cadre principal est la fibre de verre tandis que les bras V3 sont construits à partir de nylon polyamide ultra-durable et sont plus épais et plus fort pour réduire la flexion.

Assemblée est un jeu d'enfant avec des manches en laiton pré-threaded pour tous les boulons de cadre, donc pas de lock-écrous sont obligatoires. Une grande caractéristique de ce cadre sont les grandes pattes de fixation à l'avant et l'arrière de la plaque de fond de cadre principal pour les caméras de montage ou d'autres accessoires. Ceci en fait un excellent moyen de prendre la vidéo aérienne ou à la mouche FPV sans la nécessité d'ajouter des supports de montage supplémentaires.

Le Z600 dispose également d'armes colorées (2 blancs et 2 rouges) qui sont grands pour l'orientation. Il aide à garder vous voler la bonne direction sans avoir besoin de différents accessoires colorés.

Le Z600 comprend un train d'atterrissage de style de crabe à mi-jambe avec glissement sur le montage au châssis inférieur. Nous offrons une gamme complète de l'électronique multi-rotor tels que le contrôle multi-rotor bord, ESC et moteurs. Il n'a jamais été plus facile ou plus abordable pour obtenir un quad dans l'air!

Caractéristiques:
• Construit à partir de fibre de verre de qualité et de nylon polyamide.
• Pré-threaded manches en laiton pour tous les boulons de cadre.
• Bras de couleur pour l'orientation pour vous garder voler dans la bonne direction.
• vitesse à mi-jambe atterrissage style Crab
• pattes de montage grandes sur la plaque principale de fond de cadre pour le montage facile à la caméra.
• Facilité de montage.

Spécifications:
Largeur: 600mm
Taille: 58mm w / o engins de crabe, 138mm avec des engins de crabe
Poids: 390g (w engrenage / Crab inclus mi-lift)
Trous Moteur Mont Bolt: 16 / 19mm

Product
Specifications

Informations supplémentaires

  • Référence:
    450000066-0
  • Brand:
    Non
  • Capacité ( mAh )
    Non
  • Poids (g)
    568.00
  • Longueur:
    360.00
  • Largeur:
    65.00
  • Taille
    150.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Eu comprei esse frame, e coloquei 4 motores sunnysky , com esc afro de 30 amp aqui da HC, usando hlice 10x4. Ficou muito bom e econmico com 4s 5800mha. Tem espao ate pra uma bateria de 4s 10amp.O quadricptero com baterias 4s 5800, fica muito estvel e muito bonito no cu. ja com a 10amperes 4s, da uma tremida pra decolar mas voa direitinho. voa meia hora. eu vou comprar outro..muito bom..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for a school project (my daughter's). It delivered on every promise. It is robust, easy to see and easy to build on- we customized some of the structure, and added a 3rd platform for components, but it was easy to construct- went together with no problems and has held up well to new pilot abuse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
At First, My quad (wight: 1750g) works perfectly with this frame for ~10 flights..After that It was crashed on coconut tree, the frame was not broken, but some arm had very light bend. after check and repaired the vehicle, I armed again..it is jerking/vibrating more and fly uncontrollable and soon get crash heavily...the vibration problem is not fixed yet..It was the problem of frame..more flexing after a single crash..so vibrating more when armed at 60pcnt throttle.. So I am not recommending this frame anymore..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and strong frame, definetly would buy it again! It's a little flexible, so when you crash it doesn't brake. Still it's strong enough to fly stable. It's hard to fit a camera gimbal under the frame. Most are to large.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This framework is not good for anything , bend , vibrate too much, in short words is not quality for Hobyy king , if you have nice quality stuff please do not put them on sale
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have ordered these and he's very bad holes do not come out of the schroedraad. wire ends wont come loose and the holes are full of plastic I have the set immediately thrown in the garbage.
HK must keep better control
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Velmi odoln rm proti pokozen, ale jeliko je mkk, jsou zde do urit mry problmy s kmity a vybracemi.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Z600 is a nice, fairly robust frame. There are some issues with regard to alignment of the arms as I found that the motors when mounted were not straight. Also, be careful tightening the M3 bolts into the brass inset bushes used to connect the arms to the glass fibre plates. These can easily be stripped; so don't tighten them too hard and make sure you use loctite. HK do sell replacement crab-gear struts for this frame but for some reason, these are in various colours other then black (not that it's a problem). It would have been nice to have a third frame tier, or at least stand-offs provided for a power distribution board to clean up the "dirty" frame area. If you intend to use the crab gear, you will need to think about the area this consumes on the lower mounting plate front/rear extensions; especially if you want to mount a camera or anything else in these areas. I'm just waiting on stock now to buy another for spare parts. Hope this helps someone.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame if you're willing to put some work into it. First off I had to get M3 x 8 screws to mount the motors. A bit of a pain since these screw sizes are kind of an odd ball screw in the USA. Second when the motors where mounted I noticed they were not level so after 30 min with a bubble-leveler and some plastic shim stock I got that straightened out. After all that it flew great using the KK2.1.

So basically you get what you pay for. Its a cheap frame you can throw motors onto and it will work, just not very well. If you put in a little time leveling everything you'll be much happier with it. My only complaint is that it doesn't have a PCB base.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice frame... But need M3 x 10 for motor screw
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Z700v-2

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.