S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Z700-V2 Cadre Quadcopter Blanc / Rouge Avec Crab Landing Gear (700mm) V2

Z700-V2 Cadre Quadcopter Blanc / Rouge Avec Crab Landing Gear (700mm) V2

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
825 g
SKU:
450000065-0

Combinez

et économisez plus
acc
Description
du

Le Z700-V2 est un cadre super-dimensionné et bien pensé 700mm quad construit à partir de matériaux de qualité. Le cadre principal est la fibre de verre tandis que les bras sont construits à partir de polyamide nylon ultra-résistant.

Assemblée est un jeu d'enfant avec des manches en laiton pré-threaded pour tous les boulons de cadre, donc pas de lock-écrous sont obligatoires. Une grande caractéristique de ce cadre sont les grandes pattes de fixation à l'avant et l'arrière de la plaque de fond de cadre principal pour les caméras de montage ou d'autres accessoires. Ceci en fait un excellent moyen de prendre la vidéo aérienne ou à la mouche FPV sans la nécessité d'ajouter des supports de montage supplémentaires.

Le Z700 dispose également d'armes colorées (2 blancs et 2 rouges) qui sont grands pour l'orientation. Il aide à garder vous voler la bonne direction sans avoir besoin de différents accessoires colorés.

Le Z700 comprend un train d'atterrissage de style de crabe salut-jeu de jambes et un support de crochet et de la tige de montage. Nous offrons une gamme complète de l'électronique multi-rotor tels que le contrôle multi-rotor bord, ESC et moteurs. Il n'a jamais été plus facile ou plus abordable pour obtenir un quad dans l'air!

Caractéristiques:
• Construit à partir de fibre de verre de qualité et de nylon polyamide.
• Pré-threaded manches en laiton pour tous les boulons de cadre.
• Bras de couleur pour l'orientation pour vous garder voler dans la bonne direction.
• vitesse Salut-jambe atterrissage style de crabe
• Crochet et tige options de montage
• pattes de montage grandes sur la plaque principale de fond de cadre pour le montage facile à la caméra.
• Facilité de montage.

Spécifications:
Largeur: 700mm
Taille: 58mm w / o crabe engrenage 258mm avec des engins de crabe
Poids: 570g (w engrenage Crab salut-élévateur / inclus)
Trous Moteur Mont Bolt: 16 / 19mm
H
ook Rod Rail: centre 55-60mm à la tige centrale de 12mm (11.75mm)

Product
Specifications

Informations supplémentaires

  • Référence:
    450000065-0
  • Brand:
    Non
  • Capacité ( mAh )
    Non
  • Poids (g)
    825.00
  • Longueur:
    320.00
  • Largeur:
    65.00
  • Taille
    215.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Z700v-2

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.