New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Zéro 95% moteur RTF w / brushless et ESC

Zéro 95% moteur RTF w / brushless et ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
Zero
WANT FREE SHIPPING? Click here to find out more!
La RTF Zero est livré complet avec moteur brushless, ESC et tous les servos installés. Assemblée de l'aile Zero, auvent et la queue peut être fait en 30 minutes. Inclure votre propre récepteur pour être prêt pour votre premier vol en moins de 1 heure!
Caractéristiques:
Fuselage Longueur: 705 mm
Envergure: 850 mm
Surface de l' aile: 13,6 dm2
Poids: 375 g
Système d'alimentation: GL-370 / DS (1: 5: 3)
Hélice: EP-1047 / EP9070
Batterie: 3 cellules 11.1V - 1000mAh Li-Po

Inclus:
Moteur: 2826 Brushless moteur outrunner
ESC: 25A
Servos: 3 x 9g
Batterie Lithium Polymer
  • UGS Zero
  • Brand -
  • Capacité ( mAh ) -
  • Poids 2380.0000
  • Longueur 0.00
  • Packaging Width 0.00
  • la taille 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very nice flying model. Good power, no nasty habits.

Loops both inside and outside from level.

Roll rate is very good. Spins better inverted than upright - it just doesn't want to stall upright.

Looks very nice in the air blasting around :)



A few minor points:



- The LG is very weak. Ripped out on the first hot landing. Looks better in the air without it anyway.

It did ROG from grass with no trouble and did nice touch and gos before I came in too hot.



- The pushrods were not supported in the fuselage. A chunk of foam and some epoxy fixed that



- CG is not shown. I added about 1 ounce of weight in the front of the cowl.



- The spinner is not well balanced. Just leave it off and the power system is turbine smooth

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice flying model. Good power, no nasty habits.

Loops both inside and outside from level.

Roll rate is very good. Spins better inverted than upright - it just doesn't want to stall upright.

Looks very nice in the air blasting around :)



A few minor points:



- The LG is very weak. Ripped out on the first hot landing. Looks better in the air without it anyway.

It did ROG from grass with no trouble and did nice touch and gos before I came in too hot.



- The pushrods were not supported in the fuselage. A chunk of foam and some epoxy fixed that



- CG is not shown. I added about 1 ounce of weight in the front of the cowl.



- The spinner is not well balanced. Just leave it off and the power system is turbine smooth

motor : FC 28-22 Brushless Outrunner 1200kv

BEC : 25A included

Prop : 90 * 4.7



If you use FC 28-22 motor, You can use included motor mount. Nothing to change about mount.

easy to make and flying.

I changed push road for elevator and rudder because It is weak and too long.



Gliding is very good.



I suggest for biginner of warbird.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motor : FC 28-22 Brushless Outrunner 1200kv

BEC : 25A included

Prop : 90 * 4.7



If you use FC 28-22 motor, You can use included motor mount. Nothing to change about mount.

easy to make and flying.

I changed push road for elevator and rudder because It is weak and too long.



Gliding is very good.



I suggest for biginner of warbird.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!