S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

ZTW Araignée série 18A OPTO multi-rotor ESC 2 ~ 4S (BLHeli / SimonK Firmware)

ZTW Araignée série 18A OPTO multi-rotor ESC 2 ~ 4S (BLHeli / SimonK Firmware)

Now save enregistrer 1,77 € 1,77 €

Special Price 5,88 € 5,88 €

You save enregistrer 1,77 € 1,77 €

Was  7,65 €

Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
40 g
SKU:
164000068-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

La série ZTW Araignée des CES sont un excellent choix pour toute taille de multi-rotor.

Conçu à partir du sol pour une installation simple et une installation facile et pré-flashé avec SimonK OneShot 125 firmware pour donner un super-lisse réponse rapide, linéaire des gaz qui est idéal pour multi-rotors.

A côté de la superbe qualité de construction, ZTW Araignée CES présentent une protection de surcharge thermique et gaz auto arrêt en cas de perte de signal.

Caractéristiques:
• Développé spécifiquement pour une utilisation multi-rotor
• Pré-éclair de l'usine avec SimonK firmware
• Utilise puissante, haute performance MCU
• réponse de l'accélérateur Super-doux et précis
• accélérateur Arrêt automatique du signal situation perdant
• Protection de sécurité thermique sur la charge
• Démarrage sans échec, le moteur ne fonctionnera pas jusqu'à ce que l'ESC est armé correctement
• Faible résistance interne
• Programmable via manette des gaz (voir les instructions sous "Fichiers" tab)

Spécifications:
Courant constant: 18A
Max Burst: 30A
Tension d'entrée: 2 ~ 4S LiPoly
BEC: OPTO
Dimensions: 43 x 22 x 12mm
Poids: 5.3g

S'il vous plaît noter: Pas de batterie ou moteur connecteurs sont fournis.

Product
Specifications

Informations supplémentaires

  • Référence:
    164000068-0
  • Brand:
    Non
  • Poids (g)
    40.00
  • Longueur
    210.00
  • Largeur:
    20.00
  • Taille:
    130.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent ESC's. They have been rock solid performers and never even get warm running the Multistar Mini Monsters on 4S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a bunch of these during the last sale. They're terrific ESC's and appear to be more reliable than the DYS SN20A's. The only thing I don't like about them is the difficulty in soldering to the motor wire pads. They use a horrible lead free solder and it's a pain to remove the stock wires. They should sell these with a wire-free version. The pads are really close to the chips so it would be easy to accidentally damage a component.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got these in the mail, excitedly soldered them in. Made sure polarity was right, plugged into my SPRacing F3, plugged in the battery and... instant smoke from one ESC, which took out a motor with it. Now the remaining 3 ESCs get incredibly hot just from having a battery plugged in. I've quadruple checked polarity, and it's all right. As soon as I plug them into my FC they start heating up rapidly.

Not great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well this is awesome, it is smallest than a 12A ESC, lighter and I hope that can handle the job. Its measures: 22x12x5 mm and weighs 5 grams. Motor wires and battery wires has about 55 mm of length and Rx wire has 165 mm of length including connector. Heat shrink tube is transparent which is very nice and I am very excited to install them .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Recommended, tiny size honestly about half the physical size of an Afro 12A.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC, mine arrived with blheli firmware, i don't know what bootloader but pay attention that the problem with naze32 and cleanflight are true In my case the motor scroll a little when throttle is at 0.
Changing board to CC3d all works perfectly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 of them for my 250 size quad.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought these for use on a FPV250 quad and they work great with the Naze32. I bought 5 of these and 1 turned out to have a slow response compared to the others, luckily I had the 1 spare. Could just be it wasn't flashed with the same firmware.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
O good escs, but in my case I needed to reflash because Bheli version not compatible with betaflight firmware.

HK forgot to reflash with last Bheli firmware.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 4 to try out on my QAV210, work very well and power seems to be better than the DYS20A. I bought another 16 to replace those DYS20A which i keep having problem even new from pack. I will no buy DYS anymore as the ZTW works better and cost less.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.