FrSky 2.4GHz ACCST TARANIS X9D PLUS Transmitter with X8R Rx and Free R9M FCC 900MHz Switchable Module (M2)

FrSky 2.4GHz ACCST TARANIS X9D PLUS Transmitter with X8R Rx and Free R9M FCC 900MHz Switchable Module (M2)
Copy and Share the Below URL
This exciting Frsky package includes the TARANIS X9D PLUS Telemetry Radio and the X8R telemetry receiver. FrSky is well known for their frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability.
Included with this package is a FREE R9M FCC 900MHz long range telemetry module so that you can operate on this frequency as well as the standard 2.4GHz frequency. The R9M module operates at a much lower frequency (900MHz) than the traditional 2.4GHz, the lower frequency enables better signal penetration and much longer range. The R9M FCC module offers 4 switchable RF power outputs so that you can choose the appropriate power for different flight situations. RF output selections can be chosen between 10mW, 100mW, 500mW and 1W. This long range, low latency, reliable system is capable of a range in excess of 10km, it is just what you have been looking for.
Other features of the Taranis X9D Plus is the frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability. It also has a high quality, better contrast LCD display that is adjustable from blue to white, it also has haptic vibration feedback built in. This means you can be alerted silently with the vibration or you can use the existing built-in voice or alarm features. There is one item missing, the SWR check of the transmitter antenna is no longer available. You also get great new sliders, a big low self-discharge battery, and all of the other great things you have come to expect from FrSky.
The TARANIS utilizes voice alerts from an internal speaker, this is instead of an annoying beeper. This is used for things like; audible count down timers, low voltage warnings, landing gear down warnings etc. Just about anything can be programmed, you can even use your own voice. The SD card slot offers unlimited memory options and a USB port for upgrades, it even has a headphone jack.
The TARANIS mixes the power of the “OPEN TX” open-source software with an unbelievable ergonomic case, 8 programmable switches, 2 twist knobs and 2 easy to get to lateral 'slider' pots. Another feature of the Taranis Plus is the ultra-smooth quad bearing gimbals.
One of the best features of the TARANIS is its full telemetry capability, as well as RSSI signal strength feedback, there are 3 different programmable failsafe modes and receiver lock, so no more crashes due to selecting the wrong model. If you have stock of other brand receivers or bind and flly's, no worries the TARANIS has a JR style RF module slot, so you have the option of other brand modules such as the Orange DSM2/DSMX compatible or Open LRS 433mhz module, or pop in another Frsky module to expand the capabilities of the transmitter even more with dual RF.
When you put it all together, between FrSky ACCST technology and the power of “OPEN TX” software and community, the R9M module, an ergonomic case with ultra-smooth ball bearing gimbals, a large backlit LCD, new larger battery pack, you have versatility and power at an unprecedented value.
Features:
• RSSI alarms (warns you of reception problems before it becomes an accident)
• 16 channels (more when combined with external module)
• 64 mixers, 9 flight modes
• 16 custom curves with 3-17 points each, 32 logic switches
• Self-test of the transmitter antenna
• 60 Model memory (expandable via a SD card)
• Audio Speech outputs
• USB and SD card slot for unlimited memory, and firmware upgrades, sound editing.
• Long range system capable of up to 3 times the range of current systems
• Quad bearing gimbals that are silky smooth
• State-of-the-art open source software (open TX)
• Super low latency for ultra-quick response (9ms)
• Large adjustable backlit blue to white LCD display
• Real-time data logging
• Receiver lock (program locked to aircraft)
• JR Style module bay for additional RF modules
• Processor: STM32 ARM Cortex M3 60MHz
• New 2000mah battery
• Haptic Vibration Feedback Command Feature
• R9M FCC switchable 900MHz telemetry module
Specs:
Model name: Taranis X9D Plus
Number of Channels: Up to 16
Operating Voltage Range: 6-15v (2s, 3s Lipos are acceptable)
Operating Current: 260mA maximum (both RF module and backlight are on)
Operating Temperature: -10~60C
Backlit LCD Screen: 212 x 64 Monochrome
Model Memories: 60 (expandable by SD card)
Compatibility: FrSky X series, D series and V8-II series receivers
Stick mode: Mode 2 (Left hand throttle)
R9M Module Specs:
Compatibility: R9 series
Voltage Range: 4V-12.6V
External Power Supply: 4V~12V (2s Li-Battery is recommended)
(Note: A 3s Li-Battery is not recommended as an external power supply as it can cause damage)
Telemetry Interface: Smart Port
Upgrade Interface: Smart Port
Modulations: PXX or CPPM (auto-detected)
RF Operating Frequency: 915MHz
Includes:
1 x Taranis X9D ACCST 2.4GHz Plus Transmitter (Mode 2 version)
1 x R9M FCC 900MHz telemetry module
1 x X8R 2.4GHz receiver
1 x 2000mAh battery
2 x Gimbal protectors
1 x User Manual
-
Capacity (mAh) 2000.00
Robert470 | Verified Buyer
-
Overall
-
Quality
-
Value
Great Bargain
Sep 15, 2019
Ben | Verified Buyer
-
Overall
-
Quality
-
Value
Great transmitter
Jul 27, 2019
stormy | Verified Buyer
-
Overall
-
Quality
-
Value
Taranisx9d
Jul 26, 2019
Paul | Verified Buyer
-
Overall
-
Quality
-
Value
Great Transmitter
Jul 16, 2019
Dutchman | Verified Buyer
-
Overall
-
Quality
-
Value
FRSKY Taranis X9D
Jun 14, 2019
Did not get what was in item description | Verified Buyer
-
Overall
-
Quality
-
Value
Description of item is wrong
May 16, 2019
Dutchman | Verified Buyer
-
Overall
-
Quality
-
Value
Tara is X9D
May 15, 2019