Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

2.4Ghz SuperMicro Sistemi - JR modulo.

Generating Links

2.4Ghz SuperMicro Sistemi - JR modulo.

Prezzo:

Now save risparmia 0,00 € 0,00 €

22,99 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
HK-X600J
Spedizione gratuita? Clicca qui per saperne di più!

Perfetto per volantini interni e chi ama armeggiare con il mestiere d'aria di dimensioni micro. sistemi SuperMicro 2,4 GHz ha una serie di ricevitori opzionali, CES e le unità all-in-one a disposizione per i vostri progetti personalizzati. Quando mantenere il peso verso il basso compent è fondamentale la serie SuperMicro è una delle soluzioni più convenienti e semplici sul mercato oggi.

Spec.
Frequenza: 2,4 GHz
Tipo: FHSS
Tipo di modulo: JR
Dimensioni: 64,46 millimetri x 51,80 millimetri x 23,27 millimetri
Trasmissione di potenza: 18dBm
Segnale di ingresso: PPM (50 mV o 2 ~ 5v)
Gamma di tensione in ingresso: 5.0 ~ 12.0V
Peso: 49.3g

Include.
1 x MFX600J Module
1 x 2,4 GHz Antenna

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

phineas | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 13, 2012

You can use it with a Graupner HOTT TX like MX-12 or MX-16 for example. The only thing that you need, is a PPM Signal, from the Teacher-Cable or from the receiver (GR-12(s) connector 6, "SUMO").

Works great with '2.4Ghz SuperMicro Systems - Receiver and ESC All-in-one (5ch)'!

tom | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2012

After re-arranging the antenna in the turnixy 9X this module popped right in and work perfectly.

TOMO

madmotu | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2011

Using the HK104RX-S you can plug esc in to any channel you like and then elev' ect' to were it works best,and then set thottle on esc(up > down) and restart works for me,been 3 weeks now and no glitch's yet fingers crossed.Using 2s and plush 6a, 2xUltra Micro servo's 1x3.5g HK(ailerons).On Micro CristeenEagle bipe.Flys nice just need more travel on Ultra Micro servo's.not really 3d yet:)..

Nice Module all round for the cash,just watch the aerial base,tighten with locktite and dont other tighten aerial.Origanal module from 9X now has its own aerial on the back,good for sim to.Great stuff HK

rodolphe | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2011

Does it work with multiplex MC 3030, please, and if yes, do you know the schema for wiring please ?

Craig | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 15, 2011

Just got the package today, I have also purchased the Turnigy 9X transformer to run this module in. First a quick warning to check the Antenna fitting on the module is tight before attaching the antenna to the module and note the antenna only screws on approx 4mm and you have a lot of thread still showing, mine was lose and before I knew it the fitting was spinning and the antenna wire broke off inside the module (it maybe a good idea to glue or lock-tight this fitting before attaching your antenna). No problem for me as I was going the remake the module to use the exiting 2.4Ghz trany antenna anyway, but just be careful if you are only using the module antenna. Module pluged straight into the Turnigy Trany and binded to the 2.4Ghz SuperMicro Receiver and all working fine, quick range test inside home about 50m (as far as I could get) and still working (very cold, dark and wet outside in Victoria, Australia this time of the year)

Would have been all 5 crowns apart for the antenna connection (Still very happy)

File dei clienti
Manual Download [192]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!