New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

2804-210Kv Brushless giunto cardanico del motore (ideale per GoPro per Compact Style telecamere)

2804-210Kv Brushless giunto cardanico del motore (ideale per GoPro per Compact Style telecamere)

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

11,24 €
Stato:
Disponibile
SKU:
047000029-0
WANT FREE SHIPPING? Click here to find out more!

Cercando di rendere la vostra piattaforma video ultra-liscio? Questo è il massimo in lisce motori brushless giunto cardanico costruito palo alto scopo conteggio.

Il motore 2804 viene fornito con montaggio ad incasso in modo che qualsiasi fai da te a progetti Pro sono semplice e diretto, si tratta anche con il connettore femmina standard di pre-installato, quindi il cablaggio è semplice come inserirlo. E 'una partita perfetta per il nostro Brushless giunto cardanico Stabilizzazione Board e IMU.

Il 2804 è la dimensione ideale per le macchine fotografiche intorno 100-300 grammi (stile GoPro).

Spec:
Poli: 12N14P
KV (RPM / V): 210
Resistenza: 10.4omh
Peso: 35g
Filo: 0,19 millimetri
Coppia: 240g
Fondo fori centro a centro: 16 mm e 19 millimetri
Top centro fori al centro: 12mm

  • SKU 047000029-0
  • Brand Other
  • Peso 31.0000
  • Lunghezza 35.00
  • Packaging Width 15.00
  • Altezza 35.00
  • Kv ( rpm / v ) 210.00
  • Correnti Max (A) 0.00
  • Resistenza ( mh ) 10.00
  • Max Tensione (V ) 0.00
  • Potenza ( W ) 0.00
  • Albero A ( mm ) 0.00
  • Lunghezza B ( mm ) 15.00
  • Diametro C ( mm ) 34.00
  • Can Lunghezza D ( mm ) 10.00
  • Lunghezza totale E ( mm ) 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good motor, I use it for roll in a 3 axis gimbal, I enlarged the threads to 3mm though. very simple to do, just disassemble the rotor and insert a 3 mm tap, work slowly, add a bit of oil. No predrilling required. Assemble it back. Bought two, one had a minute play if you pulled on the rotor casing, just put it on a board of soft wood rotor down and slightly tap it with a small hammer on the shaft (circlip end, do not remove the circlip) checking for play. Adjust the hammer power by slightly increasing it if there's still play. Don't over do it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor, I use it for roll in a 3 axis gimbal, I enlarged the threads to 3mm though. very simple to do, just disassemble the rotor and insert a 3 mm tap, work slowly, add a bit of oil. No predrilling required. Assemble it back. Bought two, one had a minute play if you pulled on the rotor casing, just put it on a board of soft wood rotor down and slightly tap it with a small hammer on the shaft (circlip end, do not remove the circlip) checking for play. Adjust the hammer power by slightly increasing it if there's still play. Don't over do it!

I used these for a decently heavy 3D printed gimbal of my own design. The camera housing weighed 325 grams and these motors worked fine, but was nearing the threshold of over-drawing the 500 mA max that the Tarot gimbal control gives. I tried to use these motors on a 425 gram camera and they would not stabilize the gimbal within the 500 mA allowance of the gimbal controller.

If you decide to design your own gimbal, these will work great on cameras in the 100-300 gram threshold. Remember that gimbal design is mostly about balance than it is about torque. Also, the more jostling your quadcopter or craft does, the more torque you have to put out. So, test your stuff on the ground liberally before flying it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used these for a decently heavy 3D printed gimbal of my own design. The camera housing weighed 325 grams and these motors worked fine, but was nearing the threshold of over-drawing the 500 mA max that the Tarot gimbal control gives. I tried to use these motors on a 425 gram camera and they would not stabilize the gimbal within the 500 mA allowance of the gimbal controller.

If you decide to design your own gimbal, these will work great on cameras in the 100-300 gram threshold. Remember that gimbal design is mostly about balance than it is about torque. Also, the more jostling your quadcopter or craft does, the more torque you have to put out. So, test your stuff on the ground liberally before flying it!

these motors should have high quality bearings with no clear ens to the axles images are shaky and a lot of wobble, my next motors will be of a higher quality

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these motors should have high quality bearings with no clear ens to the axles images are shaky and a lot of wobble, my next motors will be of a higher quality

meka kama nahe podi e ne neda

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

meka kama nahe podi e ne neda

I bought 6 units of this motor and only 2 of them work. The windings are open on the rest. Hobbyking needs to improve quality checks ASAP ! I also bought 3 controller boards and 1 unit came with a DIODE bad. Had to replace it myself.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 6 units of this motor and only 2 of them work. The windings are open on the rest. Hobbyking needs to improve quality checks ASAP ! I also bought 3 controller boards and 1 unit came with a DIODE bad. Had to replace it myself.

Perfect motor for GoPro H3 (Roll-axis). Buy the smaller motor for pitch.
Smooth and silent. Very happy with mine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect motor for GoPro H3 (Roll-axis). Buy the smaller motor for pitch.
Smooth and silent. Very happy with mine.

enfin ces moteurs chez HK , la on va pouvoir ralis ces propres nacelles a moindre cot comme d'habitude chez HK.
merci

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

enfin ces moteurs chez HK , la on va pouvoir ralis ces propres nacelles a moindre cot comme d'habitude chez HK.
merci

Customer files
047000029-0 -43040.JPG Download [81]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save