Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

8-9 pollici variabile Setup Passo Elica w / leveraggio e il Monte

8-9 pollici variabile Setup Passo Elica w / leveraggio e il Monte

QTY:

Now save risparmia 0,00 € 0,00 €

27,67 €
Stock:
Peso:
133 g
SKU:
095000048-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Elica a passo variabile 8 ~ 9 pollici per gli aerei di schiuma.
Per la massima performance di volo 4D coperta, non guardare oltre il VPP del sistema 4D dal Dipartimento Funzione Pubblica, offrendo al contrario di volo, la rotazione verticale, si ferma a mezz'aria, e così via. Questa unità è dotata di due dimensioni della lama nella casella 8 e 9 pollici, monta in fibra di carbonio e raccordi in plastica dura.
Si tratta di un'unità leggera che conferisce flessibilità per impostare in qualsiasi tipo di cellula schiuma interna. Si può avere il servo per "VP" montato sulla parte anteriore o utilizzando un tubo di spinta, averlo nascosto alla vista.

Un'unità davvero bella, ordinata e versatile, senza alcuna modifica del motore necessaria.

Caratteristiche:
• Montaggio semplice e facile
• componenti in fibra di carbonio

Spec:
Dimensioni lama: 8in (207 millimetri) 9in (233 millimetri)
VP Gamma Angolo: ± 15 °
Peso: 16g
Servo: 5g-8g
Applicabile motore Dimensione: 2204, 2206, 2208, 2212

Product
Specifications

Ulteriori informazioni

  • SKU:
    095000048-0
  • Brand:
    No
  • Peso (g)
    133.00
  • Lunghezza
    125.00
  • Larghezza:
    30.00
  • Altezza:
    100.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
not the best, but works , make sure to take the time to tighten all the bolts and make sure to take time to set up the curves
Quality
Value
Overall
Quality
Value
Overall
Nice system!

You can mount the servo directly on the supported CF mount or on the fuselage and control pitch with a pushrod.

I had to make one correction though: the recess in the prop hub that leads the propeller root was too narrow near the full positive pitch position, causing the hub to bind. I had to sand it a little so the hub could move freely over the full range.

Note that the hole for the propeller shaft in the hub is only 3mm, so you carefully need to widen it with a reamer or drill if you want to use a motor with a 3.14mm shaft. It would be great if HK could support a 3.14mm hub.

I recommend to use the innermost hole on the servo arm to control pitch. The range is then just sufficient for that and you want to use maximum servo force anyway. When I connected it to the 2nd hole of a TGY1440A, I couldn't get full negative pitch at high RPM. If the horn is too long, it may also flex under load, causing the control bearing to tilt and slow the propeller down.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.