Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

900MHZ 1500mW Tx / Rx & Camera CCD da 1/3-inch NTSC 520TVL

Generating Links

900MHZ 1500mW Tx / Rx & Camera CCD da 1/3-inch NTSC 520TVL

Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9171000008
Spedizione gratuita? Clicca qui per saperne di più!
12 sistema video Canale 900Mhz Tx / Rx con fotocamera CCD.
Un potente 1.5W (1500 mW) alimentato Tx! A differenza di altri sistemi generici, abbiamo prodotto un cablaggio e incluso con la fotocamera in modo che il Tx e fotocamera saranno compatibili e la stessa tensione.
Se si acquista la fotocamera e Tx separatamente la polarità spina e tensioni possono essere molto diverse.

Incluso.
1 x SONY CCD 1 / 3inch Camera
1 x 900Mhz 8 canali trasmettitore Video (1500 mW)
1 x 900Mhz 12 canali Ricevitore video


Spec fotocamera.
Dispositivo di immagine: 1/3 pollici Sony Super HAD CCD a colori
Pixel: 752 x 582 (NTSC)
Sincronizzazione: Sincronizzazione interna
Risoluzione orizzontale: linee 520TV
Illuminazione minima: 0.1Lux / F1.2
Rapporto S / N: Maggiore di 48dB (AGC OFF / B / W OFF)
Bilanciamento del bianco: Auto Tracking White Balance
La compensazione automatica della retroilluminazione: ON / OFF
Obiettivo: 3.6-6mm
Tensione in ingresso: DC12V
Corrente elettrica: 80MA ± 5MA
Otturatore elettronico: Auto
PAL: 1/50 a 1 / 100.000 secondi
Uscita video: 1,0 Vp ~ p75Ω
Temp di funzionamento .: -10 ~ + 50
Dimensioni: 38 x 38 mm
Alimentazione: 12V / 150mA
 
FPV Tx Spec.
Canale: 8-Ch, la sincronizzazione AV
Potenza: 1500 mW
Tensione in ingresso: 12V
Peso: 18g
Dimensioni: 73x41x14mm
Frequenza: 0.9G 0.910G, 0.980G, 1.010G, 1.040G
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

JeanFPoulin | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 19, 2013

Everything worked out of the box. The camera was indeed 12V since it has a 78L15 regulator on it. This means that it can accept up to 15V and down the voltage to 5V automatically. The picture was good and no problems so far. Heat wise, the receiver was a bit warm but neither the Tx or the Rx were hot to the touch.

skydive4ever | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Nov 17, 2012

Got mine today, works great right out of the box. Did not need to swap any wires and/or add a bec for the camera as mentioned in previous posts. I also purchased a wide angle lens, definitely worth it. :-)

Ken_S | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Sep 27, 2012

My camera came complete and worked the first time I hooked it up without any modifications. I guess that HK was listening to all of your complaints. All that is missing is a 12v BEC.

RealGambler | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Sep 10, 2012

Also had to flip red and white wire at the camera. That's why I gave only 4 stars for overall and quality. Once you do that, it does work great though. So again, the wire harness for the camera was wrong on mine (as well as many others it seem!). Simply flip red and white and it does work. Transmitter is very heavy (very heavy case). Receiver has single output (would have been nice to have two).

richgod | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 03, 2012

Awesome set-up, did check the wiring before 1st use, everything was ok...

Excellent kit for the money, got to 1KM without a glitch using skew planar & clover leaf antennas....

GustPilot | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 21, 2012

1.5 w video out is great for LR FPV, gr8 product

tracar | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 27, 2012

of the start i checked that the unit powered up . then after it did i removed the case and covers from the circuitry for a once over and all looked fine. at first glance the unit appeared to be a refurbished one. with a few new resistors and some flux still on the board , after an alcohol wash it was good to go back to the case. but i did add some thermal grease to the transmitter side opposite the led display , so better heat transfer could occur and less chance of overheating . dont forget to install he wedges on the led side to push it towards the thermal paste :)
there really was no difference between this and the other brands i own that have the same cases . for the price it was a fair deal. buy they really need to make everyone aware about the wiring harness issue for the camera !!

Kenneth H | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 30, 2012

Purchased this setup and received my order in the USA in 10 days from order. I swapped the red and white wire going to the camera on the harness, applied 11.3 volts to it from a 3S LiPo and it works great. Clear picture!! The transmitter case is very very nice. I have not yet tested the range with the stock antennas, but I will update this soon when I do. Great Job!!

Douglas | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Apr 08, 2012

THIS DOES WORK! OK, so I ordered this product a couple months ago, and up until yesterday I was stumped. I have finally got it working! IN ORDER TO MAKE THIS WORK, YOU MUST SWITCH THE RED AND WHITE WIRES TO THE CAMERA. THE BLACK WIRE IN THE MIDDLE STAYS IN THE MIDDLE. YOU CAN DO A QUICK TEST OF THIS BY PLUGGING IN THE CAMERA CONNECTOR UPSIDE DOWN. THERE IS SOME METAL FOR THE ELECTRICITY TO THROUGH. SO JUST TAP IT DOWN ON TO THE PINS AND BE AMAZED!!! I GOT A CLEAR PICTURE ON MY TV SCREEN FROM THE TX TO THE RX. I do not believe a voltage regulator is necessary. Like this so people can be informed!

weezbad | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 26, 2012

THE CAMERA WAS DEAD ON ARRIVAL.. I USED 5VOLTS FIRST THEN 8.4 THEN 12.6...NO LUCK I HAD TO USE A SECURITY CAMERA FOR NOW.

  1. 1
  2. 2
File dei clienti
frontside camera Download [910]
backside camera Download [873]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!