ADH300XL Brushless Outrunner 5250kv
Dimensioni: 23 x 45
Tensione: 7.2V ~ 11.1v, 2S ~ 3s Lipoly
5250rpm / v
Albero: diametro di 3mm
Carico massimo: 44A
Max Watt: 450W
Kv ( rpm / v )
Correnti Max (A)
Potenza ( W ):
Lunghezza B ( mm ):
Can Lunghezza D ( mm )
Max Tensione (V )
Albero A ( mm ):
Unit Weight (g):
Diametro C ( mm )
Lunghezza totale E ( mm )
Resistenza ( mh ):
Very good replacement for MJX F45 original DC motor.I have Order 2 pcs and my first works 10sec. and is smoke. My second works i have this put in my Radjet with 3S 1300mAh and 4.1x4.1 Prop and my Radjet was very Fast. Im flying 2 Minutes and is going out and smoke.
Quality is very Bad.j ai achet ce moteur brushless que j ai mont sur un hekico mjx f 645 resultats .... exceptionnelADH300XL Brushless Outrunner 5250kv
comprei 3 motores para fazer teste em asinhas zagi mas nao tive sorte,no teste 2 queimaram logo depois que lancei a zagi.Usei helice 4.1x4.1 e ESC HobbyKing Red Brick 50A ESC - (Heli Mode)I bought two of these motors for a F-14 tomcat project.
This Tomcat project uses two 55mm edfs.
I build a thrust testing bench and used a hobby city 010 watt/amp/volt meter to get some values.
I tested the motor with an GWS 55mm edf and an AOE 6 blade impeller.
I used a 3000mah 3sp1 25-50c nanotech lipo.
38A at 350W 620 grams of static thrust.
After that I build a twin EDF thrust stand to run the motors at the same time of the same 3000mah pack, this gave this figures:
72A at 650W at 1100 gram of static thrust.
So in a twin configuration each motor pulls about 36Amps and delivers about 550 gram of thrust.
Colin:)) Amazing motor, once the shaft is reversed it becomes even better :D Bought two, then designed a speed delta with each motor at either end :D No tourqe roll as a rusult and running on two 40amp ESCs and one 2200mph 45-90c nano tech :D End result is you get a non laterial tourque model plane that can hit over 160mph :D use 30mm spinners and 4.1x4.1 props :D Amazing 5 starBought it to my 51mm 7 blade EDF conect a 3S battery very good power but ESC and motor are hot like a hell...