New Items Notizie Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

AfroFlight Naze32 rev5 Acro FunFly controller

AfroFlight Naze32 rev5 Acro FunFly controller

Now save risparmia 0,00 € 0,00 €

23,43 €
Stato:
Non disponibile!
SKU:
9171000510-0
WANT FREE SHIPPING? Click here to find out more!

Il popolare Naze32 è qui! Inizialmente progettato per l'utilizzo con le piccole e artigianali Multirotor di medie dimensioni, è diventato il go-to Controller per una serie di progetti Multirotor e propheads.

Il famigerato Hamasaki AKA "Timecop" non era felice con le limitazioni e le prestazioni di un MCU a 8 bit potrebbe trasportare su piattaforme FC attuali, così ha deciso di fare un controllore di volo che potrebbe prendere quasi tutte le richieste di uno sviluppatore potrebbe gettare a lui, e così è nato il Naze32. Al centro del Naze32 è un 32bit ST cavallo micro opera di un processer, con la memoria non sfruttato e potenza della CPU e una serie di sensori altrettanto impressionanti. La Naze è anche abbinato con alcune delle più belle programmi con interfaccia grafica e le caratteristiche per ottenere il massimo dalla propria configurazione.

Il Naze32 si presenta come la più completa versione Acro ancora, con entrambi i perni stretto e 90deg per la preferenza e uscire cablaggio abbinato.

La versione Dipartimento Funzione Pubblica è completamente autorizzata e canoni sono pagati allo sviluppatore su ogni Naze32 venduto.

Caratteristiche:
• uscite motore flessibili, supportano vari tipi di cellule:
Quad / Hexa / Tri / Bi / Y4 / Y6 / Octo / Camera del giunto cardanico. (Di default è Quad-X)
• Fino a ingresso RC 8 CH - supporta ricevitori standard (PWM), ricevitore PPM Sum (FrSky, ecc), o ricevitori satellitari Spektrum.
• Costruito in inverter telemetria FrSky (comune porta w / main)
• monitoraggio della tensione della batteria
• Moderna processore a 32 bit in esecuzione a 3,3 V / 72MHz (STM32F103CB).
• A bordo MicroUSB per la configurazione e la configurazione
• LED così luminoso, avrebbero potuto accecare voi
Il software di configurazione • MultiWii-based per una facile configurazione
hardware rev5

Specifiche:
36x36 mm (30,5 millimetri di montaggio)
5,3 grammi (nessuna intestazione, 7.3 grammi con)
2000 gradi / secondo a 3 assi MEMS giroscopio + accelerometro (MPU6050)
Tensione di ingresso: Max 16V su rotaia di ingresso e fino a 35V 6s sulla linea di tensione di senso

Incluso:
Naze32 rev5
pin header 2x5
pin 12x2 intestazione - opzione intestazione dritto (romperlo in 4 2x3 per perni motori / telemetria) OR
3x6 intestazione angolo retto e intestazione 2x3 ad angolo retto - opzione ad angolo retto
cavo breakout 1x RC

Scarica Manuale d'uso per rev5

Software di configurazione - Chrome Baseflight Configurator (preferito)
https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

È inoltre possibile utilizzare 2.3 o più recente versione di MultiWiiConf (basato su Java) da http://code.google.com/p/multiwii/downloads/list .

Il software è open-source! repository di codice a
https://github.com/multiwii/baseflight

  • SKU 9171000510-0
  • Brand Other
  • Capacità ( mAh ) -
  • Peso 25.0000
  • Lunghezza 60.00
  • Packaging Width 30.00
  • Altezza 60.00
  • Naze 32 Flight Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great older board, good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great older board, good price.

Great fc, used it on my epipdb by quad otters enzo, definitely recommend this board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great fc, used it on my epipdb by quad otters enzo, definitely recommend this board.

Great flight controller.
Works just fine, great price and easy to program. Very happy with this FC, no problems so far, I run Cleanflight on it with pwm, but no problems, works as expected!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great flight controller.
Works just fine, great price and easy to program. Very happy with this FC, no problems so far, I run Cleanflight on it with pwm, but no problems, works as expected!

This boards are really great if you are looking for tidy wiring and direct onnections. Be prepared to be able to solder though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This boards are really great if you are looking for tidy wiring and direct onnections. Be prepared to be able to solder though.

Great Flight Controler!

I had a cc3d atom before, i flashed both of them to cleanflight and flew them in the same copter, so i could compare them. At first I noticed, that the naze32 semms to work a lot faster! It connects much faster to my cleanflight software than my cc3d did before. I haven`t flown it for that long, but until know I could really recomend it! There had just been a little issue with setting it up, because my channel 1 was not the channel 1 in cleanflight and so on with the other channels, but I had that issue with my cc3d before too, so Iam not sure if it?s not cleanflight?s fault.

All in all pretty nice product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Flight Controler!

I had a cc3d atom before, i flashed both of them to cleanflight and flew them in the same copter, so i could compare them. At first I noticed, that the naze32 semms to work a lot faster! It connects much faster to my cleanflight software than my cc3d did before. I haven`t flown it for that long, but until know I could really recomend it! There had just been a little issue with setting it up, because my channel 1 was not the channel 1 in cleanflight and so on with the other channels, but I had that issue with my cc3d before too, so Iam not sure if it?s not cleanflight?s fault.

All in all pretty nice product.

eine der besten fc am Markt gnstig und gut

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

eine der besten fc am Markt gnstig und gut

Epic control board. I previously have had two kk2 boards and haven't been happy with them and had to get refund from hobby king twice and had great customer service. I then bought this board having seen that flite test uses this board. Has great control and better programming than kk2. For me it was very easy to use after watching flite test's setup videos stuff. The auto level isn't yet setup perfectly but the manual mode is good enough and very stable. Well worth buying and a great little fight control board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Epic control board. I previously have had two kk2 boards and haven't been happy with them and had to get refund from hobby king twice and had great customer service. I then bought this board having seen that flite test uses this board. Has great control and better programming than kk2. For me it was very easy to use after watching flite test's setup videos stuff. The auto level isn't yet setup perfectly but the manual mode is good enough and very stable. Well worth buying and a great little fight control board.

great FC for acro, you only need to short the boot-pin to flash your favourite firmware

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great FC for acro, you only need to short the boot-pin to flash your favourite firmware

Very good flight controller! I use it for a 210 mini quad, it is much, much better, more precise than the KK2 board, I had before. It is also very cheap for the value. I use it with cleanflight, and I think it is perfect! My only downside is the USB connector is on the back, not on the side, so it's not so easily accessible, but that's all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good flight controller! I use it for a 210 mini quad, it is much, much better, more precise than the KK2 board, I had before. It is also very cheap for the value. I use it with cleanflight, and I think it is perfect! My only downside is the USB connector is on the back, not on the side, so it's not so easily accessible, but that's all.

Love this nice board on my x525 quad... I use it with CleanFlight added a simple NMEA ttl GPS on 57600 and 5Hz for FPV OSD only (not for GPS based flight modes) bought at banggood. This version is simple without Baro or Magnetometer, but for learning and enjoying FPV flying with some soft 3D moves it is a great choise. This board is revision 5, but good as much as version 6... see or feel no difference in flight at all.



Bye

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this nice board on my x525 quad... I use it with CleanFlight added a simple NMEA ttl GPS on 57600 and 5Hz for FPV OSD only (not for GPS based flight modes) bought at banggood. This version is simple without Baro or Magnetometer, but for learning and enjoying FPV flying with some soft 3D moves it is a great choise. This board is revision 5, but good as much as version 6... see or feel no difference in flight at all.



Bye

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
CLI Variables Download [63]
Naze Basic Download [566]
Naze32 manual Download [341]
Graupner HoTT Telemetrie 2 Download [359]
Graupner HoTT Telemetrie 3 Download [2191]
Graupner HoTT Telemetrie 1 Download [534]
No File Name Download [590]
Thanks HK Download [3737]
Updating Download [724]
Updating parts Download [12]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking